Casting directly from a computer model by using advanced simulation software FLOW-3D Cast Ž

• Autorzy: Sirviö M. , Woś M.
• Języki publikacji: EN

Abstrakty

EN

ConiferRob - A patternless casting technique, originally conceived at VTT Technical Research Centre of Finland and further developed at its spin-off company, Simtech Systems, offers up to 40% savings in product development costs, and up to two months shorter development times compared to conventional techniques. Savings of this order can be very valuable on today's highly competitive markets. Casting simulation is commonly used for designing of casting systems. However, most of the software are today old fashioned and predicting just shrinkage porosity. Flow Science, VTT and Simtech have developed new software called FLOW-3D Cast Ž , which can simulate surface defects, air entrainment, filters, core gas problems and even a cavitation.

Słowa kluczowe

EN

high precision; simulation; robotic; machining

PL

wysoka precyzja; symulacja; robotyka; obróbka skrawaniem

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 1
• Strony: 79--82
• Opis fizyczny: Bibliogr. 2 poz., rys.

Twórcy

autor

Sirviö M.

autor

Woś M.

• Simtech Systems Inc. Oy, Hälsovägen 2, 01150 Söderkulla, Finland,

Bibliografia

• [1] Sirviö, M. and Martikainen, H. "Simultaneous engineering between workshops and foundries" . Int. Conf. on Best Practices in the Production, Processing and Thermal Treatment of Castings. Singapore, 10 - 12 Oct. 1995.
• [2] Sirviö, M . and Louvo, A. "Use of simulated porosity for avoidance of casting defects". International GIFA Congress Metal Casting '94 (GIFA '94). Dusseldorf, 15-18 June 1994. German Foundrymen's Association (1994).