Design and analysis of an automotive alternator

• Autorzy: Vitek O. , Hajek V.
• Języki publikacji: EN

Abstrakty

EN

The article deals with design of the heavy-duty claw-pole automotive alternator. This type of alternator should operate under unfriendly condition, e.g. in agricultural applications. Described development is supported by Ministry of Industry and Trade in frame of the project FI-IM4/194. Required parameters were evaluated and analytic design of magnetic circuit was performed in cooperation with Magneton a.s. Kromeríž company. A laboratory sample was also manufactured in this stage of the project solution. The 3D finite element method model was created simultaneously using the ANSYS program. The model was used to verify the magnetic flux density distribution and it will be used for optimization in following stage of the project.

Słowa kluczowe

EN

automotive; alternator; claw-pole design; finite element method; measurement

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
• Rocznik: 2008
• Tom: Vol. 62, nr 28
• Strony: 222--226
• Opis fizyczny: Bibliogr. 6 poz.

Twórcy

autor

Vitek O.

autor

Hajek V.

• Brno University of Technology, UVEE, Technická 8, 612 00 BRNO,

Bibliografia

• [1] DÈDEK, L., DËDKOVÂ, J., Elektromagnetismus, VUT1UM Publishing, Brno, 1998, 229 pages, ISBN 80-214-1106-6.
• [2] PETROV, G.N., Elektrické stroje 2, Praha: Acadcmia, 1982, 732 pages, ISBN 21-055-82.
• [3] CIGÂNEK, L., Stavba elektńckych stroju, SNTL PRAHA, 1958.
• [4] HAJEK, V., Vypocet rozptylovych vodivosti drùpkového rotoru automobilového alternàtoru, TES 1987.
• [5] HYSEK, R., Vypocet drâpkového tïifâzového alternàtoru, DP, Ostrava 1997.
• [6] ANSYS Inc., AN SYS Release 11.0 Documentation, 2007.