Research on the model of dbd corona reaktor.

• Autorzy: Subocz J. , Banaszak S.
• Konferencja: APTADM 2007, III International Conference on Advances in Processing Testing and Application of Dielectric Materials., September, 26-28, 2007 Wrocław, Poland
• Języki publikacji: EN

Abstrakty

EN

The paper presents results of the research on power of corona discharges generated in the model of corona reactor with dielectric barrier. The model was constructed as a set of corona nets and rods covered with dielectric barrier. Two types of corona nets have been used: one with rectangle mesh, the other with hexagonal mesh. Influence of value and polarity of voltage on power of corona discharges was measured. It was found, that power generated by negative voltage half-period was higher than generated by positive one. Differences coming from type of corona mesh were also observed. Characteristics of momentary value of power and discharge current were recorded. The influence of airflow on discharges power was estimated. Depending on the shape of corona mesh, for airflow up to 4 m/s, power of corona discharges can vary about 20 prec. The research showed, that for 10-12 kV of AC voltage on corona net, it is possible to gain in the reactor discharges power density approx. 30-40 kW/m3.

Słowa kluczowe

EN

corona reactor DBD; power density; airflow

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej. Konferencje
• Rocznik: 2007
• Tom: Vol. 46, nr 19
• Strony: 137--140
• Opis fizyczny: Bibliogr. 3 poz.

Twórcy

autor

Subocz J.

autor

Banaszak S.

• Technical Uniwersity of Szczecin

Bibliografia

• [1] Cummings M., Booth S.R.: A summary of the cost effectiveness of innovative off-gas treatment technologies.
• [2] Gil-Hong J., Min-Su P., Jeong-Seok Y., Tae-Hee K.: Development of 0.5 MWe scale DeSOx-DeNOx system using pulsed corona discharge. Environment Technology Reaserch Department, South Korea.
• [3] Dors M., Mizeraczyk J.: Corona discharge-molecular sieve hybrid system for NOx removal from flue gas, J. Adv. Oxid. Technol., Vol. 7, No. 1, 2004.