Computer Aided Engineering of the surface layer in the machining process by material removal

• Autorzy: Kuzinovski M. , Cichosz P. , Trajčevski N. , Tomov M.
• Języki publikacji: EN

Abstrakty

EN

Presented is a computer-oriented methodology designed for complete engineering of the surface layer that is created in machining process by material removal. Computer support enables: projecting of surface layer characteristics related to exploitation requirements; monitoring of influential factors involved in the process of surface layer constitution; complete investigation of the characteristics of the newly created surface, especially the surface layer. In this paper special emphasis is placed on non-standard original approach to the creation of an integrated computer system, and applies: the methodology, hardware and software of the equipment, analysis and processing of data obtained from measurements. The creation of the integrated computer system is a result of the multi-research activities undertaken in cooperation between the Faculty of Mechanical Engineering at the Ss. Cyril and Methodius University in Skopje, and the Institute of Production Engineering and Automation of the Wroclaw University of Technology, Wroclaw.

Słowa kluczowe

PL

obróbka powierzchni; komputerowe wspomaganie prac inżynierskich; CAE

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Systems : journal of transdisciplinary systems science
• Rocznik: 2012
• Tom: Vol. 16, nr 2
• Strony: 25--41
• Opis fizyczny: Bibliogr. 48 poz., rys.

Twórcy

autor

Kuzinovski M.

autor

Cichosz P.

autor

Trajčevski N.

autor

Tomov M.

• Ss. Cyril and Methodius University in Skopje, Macedonia, Faculty of Mechanical Engineering - Skopje,

Bibliografia

• [1] M. Kuzinovski, V. Pavlovski, H. Zebrowski, P. Cichosz: Surface engineering in the processes of machining with material removal. Science - research project financed by the Ministry of education and science of R. Macedonia, No. 07-1259/4, 2001-2004.
• [2] Protocol of the discussion hold on the 8th June 1999 by the round table during the International Symposium "Surface Engineering in Machining" 99. Wroclaw - Szklarska Poreba, 7-9.06.1999.
• [3] B-G. Rosen, R.Ohlsson, J. Westberg: Interactive Surface Modeling, and implementation of an expert system for specification of surface roughness and topography. Int. J, Mach. Tools manufac., Vol. 35, No. 2, pp. 317-324, 1995.
• [4] Edward Miko, Piotr Rusek, Antoni Skrzypinski: The Modeling of Surface Roughness Formation by Turning. Komisja Technologii Budowy Maszyn, Poznan, Zeszyt 8, 1990.
• [5] Mikolaj Kuzinovski, Tasko Smileski, Mite Tomov: Solid works in function of parameter modeling on roughness from turning process. 10th International Scientific Conference “Computer Aided Engineering” in Szklarska Poręba, Poland, ISSN 0043-2075, pp. 154-159, 23-26 june 2010.
• [6] Biszczad R., Cichosz P., Kowalski M., Kuzinovski M.: Matematyczne modelowanie topografii powierzchni. Wpływtechnologii na stan warstwy wierzchniej - WW '02, Gorzów Wlkp.-Poznań, Gorzów Wlkp, IBEN 2002, 13 listopada 2002.
• [7] Cichosz P., Kowalski M., Kuzinovski M.: Modelowanie matematyczne powierzchni szlifowanych obwodowo i czołowo. Obróbka ścierna, Tendencje rozwoju, XXVI Naukowa Szkoła Obróbki Ściernej red. Andrzej Koziarski i Andrzej Gołąbczak, Łódź, 9-12 września 2003, Łódź: Katedra Technologii Maszyn Politechniki Łódzkiej, 2003.
• [8] M. Kuzinovski, Z. Stamboliska: Computer aided design of 3-D microgeometric structure of the machined surfaces at longitudinal turning. V Miedzynarodowa Konferencja Naukowa, Komputerowe Wspomaganie Prac Inzynerskich, Polanica Zdroj, pp 67-73, 31 maj-3 czerwca 2000.
• [9] Cichosz P., Kowalski M., Kuzinovski M.: Mathematical modelling of random surface topography. Scientific conference with International participation, Manufacturing and management in 21-st centry, Ohrid, Macedonia, September 16-17, 2004.
• [10] Cichosz P., Kowalski M., Kuzinovski M.: Mathematical modelling of determined surface topography. Scientific conference with International participation, Manufacturing and management in 21-st centry, Ohrid, Macedonia, September 16-17, 2004.
• [11] Kazimierz E. Oczos, Volodymyr Liubimov: Struktura geometryczna powierzchni. Oficyna Wydawnicza Politechniki Rzeszowskiej, ISBN 83-7199-247-5, Rzeszow 2003.
• [12] ISO 3002-1: 1982: Basic quantities in cutting and grinding-Part 1: Geometry of the active part of cutting tools-General terms, reference systems, tool and working angles, chip breakers.
• [13] Cichosz P., Karolczak P., Kuzinovski M.: Mechanisms of decohesion in cutting aluminum matrix composites. Mechanical Engineering - Scientific Journal, Faculty of Mechanical Engineering, Skopje, UDC 621, CODEN: MINSC5, ISSN 1857-5293, Vol. 27, No.1, pp.15-22, 2008.
• [14] Balamucki J., Cichosz P., Kuzinovski M.: Computer system for visual assessment of cutting tools wear and other technological surfaces. Scientific conference with International participation, Manufacturing and management in 21-st centry, Ohrid, Macedonia, September 16-17, 2004.
• [15] PN-ISO-3685: Badania trwałości noży tokarskich punktowych.
• [16] Kuzinovski, M., Pavlovski, V., Zebrovski, H.: Automation of experimental research in science and technics. Proc. Fac. of Mech. Eng., 12, Skopje, pages 5-12, 1992.
• [17] Kuzinovski M.: Investigation of physical phenomena and technological effects in turning with increased cutting speeds. Ph.D. dissertation, Faculty of Mechanical Engineering, Skopje, 1991.
• [18] Kuzinovski, M., Pavlovski, V., Zebrovski, H., Cichosz, P.: Development of methods and laboratory equipment for performing analytic-experimental researches in the field of machining process. Faculty of Mechanical Engineering-Skopje, Scientific - Research Project financed by Ministry of Education and Science on Republic of Macedonia, 1995-1997.
• [19] Kuzinovski M., Pavlovski V., Cichosz P., Zebrowski H.: Surface engineering in the processes of machining with material removal. Scientific Conference with International Participation - Manufacturing and Management in 21-st Century, Ohrid, pp.118-128, September 16-17, 2004.
• [20] Kuzinovski M., Trajčevski N., Filiposki V., Cichosz P.: Developing a data acquisition system for force and temperature measurement in the cutting process by machining with turning. 8th International scientific conference "New ways in manufacturing technologies 2006", Prešov, Slovak Republic, page 78-81, 22-23.06.2006.
• [21] Kuzinovski M., Trajčevski N., Filiposki V., Cichosz P.: Computer aided system for investigation of cutting forces and temperature in turning. VIII Miedzynarodowa Konferencja Naukowa "Komputerowe Wspomaganie Prac Inzynierskich", NR-7-8, Polanica Zdroj, page 10-14, 21-24 czerwca 2006.
• [22] Kuzinovski M., Trajčevski N., Fita S., Tomov M.: Monitoring System in the Experimental Investigations of the Temperature in the Cutting Process by Machining with Turning, Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations, Bled, Slovenia, page 427-430, May 11-12, 2006.
• [23] Trajčevski N., Kuzinovski M., Cichosz P.: Investigation of temperature during machining process by high speed turning. 10th International Scientific Conference, MMA2009, Novi Sad, Serbia, ISBN: 978-86-7892-223-7, pp.86-89, October 9-10, 2009.
• [24] Kuzinovski M., Trajčevski N., Cichosz P.: Investigation of cutting forces during machining process by high speed turning. 10 th International Scientific Conference, MMA2009, Novi Sad, Serbia, ISBN: 978-86-7892-223-7, pp.52-55, October 9-10, 2009.
• [25] Kuzinovski M., Trajčevski N., Cichosz P., Tomov M.: Monitoring System for Investigation of the Cutting Forces in the Machining With Turning. 9th International Scientific Conference, MMA2006, Novi Sad, Srbija i Crna Gora, page 19-20, 15-16 June 2006.
• [26] Kuzinovski M.: PATENT MKP B23Q 11/14, G01K 13/08, 900600, 30.09.2000.
• [27] Trajčevski, N.: Monitoring system in experimental investigation in machining with turning, Master thesis, Skopje, February 2008.
• [28] Kuzinovski Mikolaj, Trajčevski Neven, Mite Tomov, Cichosz Piotr: Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process. GÓRNICTWO ODKRYWKOWE, ISSN 0043-2075, Rocznik LI, Nr 3, pages 148-153, (10th International Scientific Conference “Computer Aided Engineering”, Szklarska Poręba, 23-26 june 2010), Wroclaw, Poland, 2010.
• [29] Kuzinovski, M., Pavlovski, V., Zebrovski, H., Cichosz, P: Development of methods and laboratory equipment for performing analytic-experimental researches in the field of machining process. Faculty of Mechanical Engineering-Skopje, Scientific-Research Project financed by Ministry of Education and Science on Republic of Macedonia, 1995-1997.
• [30] Kuzinovski Mikolaj, Trajčevski Neven, Cichosz Piotr: Automation of experimental researches of physical phenomena in cutting process by machining with turning. XXXII Conference on Production Engineering with foreign participants, Novi Sad, Serbia, ISBN: 978-86-7892-1315, pp. 69-72, 18-20.09.2008.
• [31] The American Society of Mechanical Engineers: Surface Texture (Surface Roughness, Waviness, and Lay), ASME B46.1-2002.
• [32] BS 1134-1: Assessment of surface texture. Methods and instrumentation, 1988.
• [33] BS 1134-2: Assessment of surface texture. Guidance and general information,1990.
• [34] DIN 4760: Gestaltabweichungen. Begriffe. Ordungss-ustem, Juni 1982.
• [35] ISO 4287:1997: Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters.
• [36] JIS B0601 Standard: Explanation of Surface Characteristic, Japan.
• [37] D. J. Whitehouse: Handbook of Surface Metrology. Inst. of Physics, Bristol, 1994.
• [38] J. Raja, B. Muralikrishnan, Shengyu Fu: Recent advances in separation of roughness, waviness and form. Elsevier, Precision Engineering, Journal of the International Societies for Precision Engineering and Nanotechnology, pp 222–235, 26 (2002).
• [39] B. Muralikrishnan, J. Raja: Computational Surface and Roughness Metrology. ISBN 978-1-84800- 296-8, Springer, London, 2009.
• [40] Tomov Mite, Kuzinovski Mikolaj, Cichosz Piotr: Effect of sampling spacing on surface roughness parameter values. XXXII Conference on Production Engineering with foreign participants, Novi Sad, Serbia, ISBN: 978-86-7892-1315, pp. 481-484, 18-20.09.2008.
• [41] Kuzinovski Mikolaj, Tomov Mite, Cichosz Piotr: Effect of sampling spacing upon change of hybrid parameters values of the roughness profile (Invited Paper). 10th International Scientific Conference, MMA2009, Novi Sad, Srebia, ISBN: 978-86-7892-223-7, pp. 28-32, October 9-10, 2009.
• [42] Tomov Mite, Kuzinovski Mikolaj, Cichosz Piotr: General effect of total data points number on material ratio change of the roughness profile. 10th International Scientific Conference, MMA2009, Novi Sad, Srebia, ISBN: 978-86-7892-223-7, pp.80-85, October 9-10, 2009.
• [43] Tomov Mite, Kuzinovski Mikolaj, Cichosz Piotr: Effect of evaluation length on results of surface roughness measurements. XXXII Conference on Production Engineering with foreign participants, Novi Sad, Serbia, ISBN: 978-86-7892-1315, pp.487-488, 18-20.09.2008.
• [44] Mite Tomov, Piotr Cichosz, Mikolaj Kuzinovski, Neven Trajčevski: Investigation of the function and influence of Gaussian and 2RC filters to determine the roughness profile in real periodic surfaces. IV Konferencja Naukowa, Szkola Obrobki Skrawaniem nt. Wspolczesne problemy. Lodz, Polska, ISSBN 83-920269-3-4, pp. 245-252, 06-08.09.2010 r.
• [45] Mite Tomov, Piotr Cichosz, Mikolaj Kuzinovski, Neven Trajčevski: Analysis of the possible influence in determining of the roughness profile in real non-periodicals surfaces with the application of Gaussian and 2RC filters. XXXIII Naukowa Szkola Obrobki Sciernej. Lodz, Polska, ISSBN 83-920269-4-2, pp. 359-368, 8-10.2010 r.
• [46] Mite Tomov, Mikolaj Kuzinovski, Neven Trajčevski: Function on Gaussian and 2RC filters to determine the roughness profile in real non-periodic and periodic surfaces. 14th International Research/ Expert Conference ”Trends in the Development of Machinery and Associated Technology” TMT 2010, Mediterranean Cruise, ISSN 1840-4944, pp.9-12, 11-18 September 2010.
• [47] Kuzinovski M., Pavlovski V., Zebrowski H., Cichosz P.: Residual stress in the surface layer of the machining surface by turninig with ceramic cutting inserts. Third International Conference on Advanced Manufacturing Systems and Tehnology, AMST’ 93, Udine, Italy, 1993.
• [48] Pavlovski V., Kuzinovski M., Zebrowski H., Cichosz P.: Experimental research of the physical phenomena in turning with ceramic cutting inserts. Third International Conference on Advanced Manufacturing Systems and Tehnology. AMST’ 93, Udine, Italy, 1993.