PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Determination of kinetic and stoichiometric parameters of activated sludge models

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
An overview of methods aiming at the determination of selected parameters of activated sludge models has been presented. The attention was paid to the model parameters being the most sensitive and dependent on the composition of biomass and/or substrate. These parameters should be determined experimentally. Methods based on the measurements of oxygen uptake rate are widespread use in this area. For the parameters associated with ordinary heterotrophic organisms the method is well-known and regarded as standard. At the same time for many parameters associated with polyphosphate accumulating organisms the procedures have not been elaborated so far.
Rocznik
Strony
73--83
Opis fizyczny
Bibliogr. 25 poz., tab., wykr.
Twórcy
Bibliografia
  • [1]. Henze, M., Harremoẽs, P., Jansen, J., Arvin, E., (2002) Wastewater Treatment. Biological and Chemical Processes, , Springer, Berlin;
  • [2]. Barker, P.S., Dold, P.E., (1997) Water Environ. Res, 69 (5), p. 969;
  • [3]. Gernaey, K.V., Van Loosdrecht, M.C.M., Henze, M., Lind, M., Jorgensen, S.B., (2004) Environ. Modell. Soft, 19 (9), p. 763;
  • [4]. Weijers, S.R., Vanrolleghem, P.A., (1997) Water Sci. Technol, 36 (5), p. 69;
  • [5]. Brun, R., Kuhni, M., Siegrist, H., Gujer, W., Reichert, P., (2002) Water Res, 36 (16), p. 4113;
  • [6]. Makinia, J., Rosenwinkel, K.-H., Spering, V., (2006) J. Environ. Eng. ASCE, 132 (4), p. 476;
  • [7]. Liwarska-Bizukojc, E., Biernacki, R., (2010) Bioresour. Technol, 101 (19), p. 7278;
  • [8]. Damayanti, A., Ujang, Z., Salim, M.R., Olsson, G., Sulaiman, A.Z., (2010) B Ioresour. Technol., 101, p. 144;
  • [9]. Petersen, B., Gernaey, K., Henze, M., Vanrolleghem, P.A., Calibration of activated sludge models: A critical review of experimental designs (2003) Biotechnology for the Environment: Wastewater Treatment and Modelling, p. 80., Waste Gas Handling, S.N. Agathos, W. Reineke (Eds.), Kluwer, Dordrecht;
  • [10]. Urban, R., Szetela, R., (2007) Environ. Prot. Eng., 33 (1), p. 51;
  • [11]. Rieger, L., Koch, G., Kühni, M., Gujer, W., Siegrist, H., (2001) Water Res, 35 (16), p. 3887;
  • [12]. Henze, M., Gujer, W., Mino, T., Matsuo, T., Wentzel, M.C., Marais, G.V.R., Van Loosdrecht, M.C.M., (1999) Water Sci. Technol, 39 (1), p. 165;
  • [13]. Sollfrank, U., Gujer, W., (1991) Water Sci. Technol, 23, p. 1057;
  • [14]. Brands, E., Liebeskind, M., Dohmann, M., (1994) Water Sci. Technol, 30 (4), p. 211;
  • [15]. Rappeler, J., Gujer, W., (1992) Water Sci. Technol, 25 (6), p. 125;
  • [16]. Doran, P.M., (1995) Bioprocess Engineering Principles, , Academic Press, London;
  • [17]. Liwarska-Bizukojc, E., Scheumann, R., Drews, A., Bracklow, U., Kraume, M., (2008) Water Res, 42 (4-5), p. 923;
  • [18]. Pala, A., Bölükbas, O., (2005) Process Biochem, 40 (2), p. 629;
  • [19]. Cech, J.S., Chudoba, J., Grau, P., (1984) Water Sci. Technol, 17, p. 259;
  • [20]. Ekama, G.A., Dold, P.L., Marais, G.V.R., (1986) Water Sci. Technol, 18 (6), p. 91;
  • [21]. Novák, L., Larrea, L., Wanner, J., (1994) Water Sci. Technol, 30 (11), p. 171;
  • [22]. Spaniers, H., Vanrolleghem, P.A., (1995) Water Sci. Technol, 31 (2), p. 105;
  • [23]. Vaiopoulou, A.E., Aivasidis, B.A., A semi-batch on-line method for biokinetics determination in an enhanced biological phosphorus removal system (2007) Proc. European Congress Chemical Engineering (ECCE-6), , 16-20 September 2007, Copenhagen, Denmark;
  • [24]. Siegrist, H., Brunner, I., Koch, G., Phan, L.C., Le, V.C., (1999) Water Sci. Technol, 39 (1), p. 129;
  • [25]. Henze, M., Grady Jr., C.P.L., Gujer, W., Marais, G.V.R., Matsuo, T., (1987) Activated Sludge Model No. 1, , IAWQ Scientific and Technical Report No. 1, IAWQ, London
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW8-0019-0034
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.