PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Efekt elektretowy w dielektrykach polimerowych w aspekcie wykorzystania w medycynie i ochronie zdrowia

Autorzy
Identyfikatory
Warianty tytułu
EN
Electret effect in polymer dielectrics and its applicability to medicine and health protection
Języki publikacji
PL
Abstrakty
PL
Przedstawiono praktyczne zastosowania elektretów z ładunkiem implantowanym z zewnętrznego źródła, w medycynie i ochronie zdrowia. Omówiono podstawowe parametry uformowanych elektretów, a szczególnie średnie położenie ładunku elektrycznego i rozkład ładunku przestrzennego. Podano izotermiczne i nieizotermiczne metody szacowania czasu życia ładunku elektretu. Przeanalizowano wpływ parametrów procesu technologicznego, warunków elektryzacji i czynników środowiskowych na stabilność ładunku włóknin filtracyjnych i jakość filtracji. Badania te zilustrowano mikrofotografiami powierzchni włóknin filtracyjnych. Zaprezentowano konstrukcję elektretowego przetwornika drgań, charakteryzującego się dużą powierzchnią i wysoką czułością. Wprowadzono w złożoną problematykę roli ładunku elektrycznego w procesach zachodzących na granicy materiał protetyczny-tkanka płynna (krew). Do scharakteryzowania właściwości elektrycznych powierzchni materiału i interpretacji zjawisk zachodzących w roztworze wykorzystano potencjał elektrokinetyczny. Dokonano doboru praktycznych metod laboratoryjnych, pozwalających na ocenę in vitro materiałów. Ustalono, że poza znakiem i jednorodnością powierzchniowej gęstości ładunku elektrycznego, wyraźny wpływ na adhezję elementów morfotycznych krwi ma rozkład ładunku w objętości materiału. Uzyskane wyniki badań, uzupełnione o badania mikroskopowe, wskazały na nowe, istotne czynniki warunkujące proces zakrzepowy krwi.
EN
The monograph presents practical applications of electrets with the charge implanted from an external source, in medicine and health protection. Basic characteristics of the formed electrets, especially an average location of electric charge and space charge distribution are discussed. The isothermal and non-isothermal methods of assessment of the charge lifetime of the electrets are presented. The effect of the manufacturing process parameters, electrization state and environmental conditions on the charge stability of filtration fibers and filtration quality is analyzed. The investigation is illustrated with the microphoto-graphs of the surfaces of the filtration fibers. The structure of on electret condenser transducer characterized by a large area and high sensitivity is presented. A brief explanation is given of a complex role of the electric charge in the processes occurring at the interface of prosthetic material--liquid tissue (blood). The electrokinetic potential was used for characterization of the electrical properties of material surface and interpretation of physical phenomena taking place in the solution. The practical laboratory methods enabling in vitro assessment of the materials investigated have been selected. Besides the sign and homogeneity of the surface electric charge also the charge distribution in the bulk was found to play an important part in adhesion of morphotic blood elements. Results obtained, together with the results of additional microscopic examination, showed the new important factors determining the process of blood clotting.
Twórcy
autor
  • Instytut Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej, Wybrzeże Wyspiańskiego 27, 50-370 Wrocław, bozena.lowkis@pwr.wroc.pl
Bibliografia
  • [1] ABOU-DAKKA M., BAMJI S. S., BULINSKI A. T„ Space charge distribution in XLPE by TSM, using the inverse matrix technique, IEEE Trans. Electr.Insul., 1997, Vol. 4, No. 3, 314—320.
  • [2] ACKLEY M. W., Degradation of electrostatic filters at elevated temperature and humidity, Filtration and Separation, 1992, Vol. 22, No. 4, 239-242.
  • [3] AIPING Z., T. C, Blood compatibility of surface-engineered poly(ethylene terephthalate) via o-carboxymethylchitosan, Colloids and Surfaces B: Biointerfaces, 2006, Vol. 50, 120-125.
  • [4] ANAL A. K., TOBIASSEN A., FLANAGAN J., SINGH H., Preparation and characterization of nanoparticles formed by chitosan-caseinate interactions, Colloids and Surfaces B: Biointerfaces, 2008, Vol. 64, 104-110.
  • [5] APER T„ SCHMIDT A., DUCHROW M., BRUCH H. P., Autologous blood vessels engineered from peripheral blood sample, Eur. J. Vase. Endovasc. Surg., 2007, Vol. 33, 33-39.
  • [6] BADIAN L., KUŚ H, KĘDRA H., KNASIAK D., ŁOWKIS B., RUTOWSKI R., STANISZEWSKA J., Fizyczne i biologiczne badania elektretowej folii poliestrowej, Polimery w Med., 1978, t. 8, nr 2, 43-56.
  • [7] BAIER R. E., The organization of blood components near interfaces, Ann. N.Y. Acad. Sci., 1977, No. 283, 17-36.
  • [8] BAIRD R. N., ABBOTT W. M., Vein grafts: An historical perspective, Am. J. Surg., 1977, Vol. 134, 293-296.
  • [9] BARBUCCI R., BENVENUTI M., DAL MASO G, FERRUTI P., RUSSO R., TEMPESTI R, DUNCAN R., BRIDGES J. F., Mc CORMICK L. A., A new material for biomedical application, [w:] Polymers in Medicine III, pod red. C. Migliaresi et al., Elsevier Science Publishers B.V., Amsterdam 1988.
  • [10] BARRETT L.W., ROUSSEAU A. D., Aerosol loading performance of electret filter media, American Industrial Hygiene Association Journal, 1998, Vol. 59, 532-539.
  • [11] BAUMGARTNER H, LOFFLER F., UMHAUER H, Deep-bed electret filters: the determination of single fiber charge and collection efficiency, IEEE Trans. Electr. Insul., 1986, Vol. EI-21, No. 3, June, 477-486.
  • [12] BECKLEY L. M., LEWIS T. I., TAYLOR D. M., Electron - beam - induced conduction in poly ethyleneterephthalate films, J. Phys. D: Appl. Phys., 1976, Vol. 9, 1355-1365.
  • [13] BERGLUND J. D., GALIS Z. S., Designer blood vessels and therapeutic evascularization, Brit. J. Pharm., 2003, Vol. 140, 627-636.
  • [14] BLACKFORD D. B., BROWN R. C, An air filter made from an electret and a conductor, IEEE Trans. Electr. Insul., 1986, Vol. EI-21, No. 3 June, 471-476.
  • [15] BŁAŻEWICZ S., STOCH L., Problemy biocybernetyki i inżynierii biomedycznej 2000. Praca zbiorowa pod red. Macieja Nałęcza. T. 4. Biomateriały, Akademicka Oficyna Wydawnicza Exit, 2003.
  • [16] BOMSKI H., Podstawowe laboratoryjne badania hematologiczne, PZWL, Warszawa 1983.
  • [17] BROCHOCKA A., RUSZKOWSKI K., Niektóre aspekty wytwarzania elektretowej włókniny filtracyjnej otrzymywanej metodą klasyczną w oparciu o wykorzystanie efektu tryboelektrycznego, [w:] VI Sympozjum Naukowo-Techniczne, Białystok, 1999, 42-49.
  • [18] BROWN R. C, LIU B., Effect of industrial aerosols on the performance of an electrically charged filter material, Annals of Occupational Hygiene, 1988, Vol. 32, 271-294.
  • [19] BRYNDA E., HAUSKA M., KALAŁ J., CEPALOWA N. A., Adsorption of human fibrinogen and human serum albumin into polyethylene, Ann. Biomed. Eng., 1980, Vol. 8, 245-252.
  • [20] BUTTAFOCO L., ENGBERS-BUIJTENHUIJS P., POOT A. A., Physical characterization of vascular grafts cultured in a bioreactor, Biomaterials, 2006, Vol. 27, 2380-2389.
  • [21] CALS M. P., MARQUE J. P., ALQUTE C, Direct observation of space charge evolution in e-irradiated Kapton films, IEEE Trans. Electr. Insul., 1992, Vol. 27, 763-767.
  • [22] CAMPBELL D., GOLDFARB D., ROE R., A small arterial substitute: Expanded microporous polytetrafluoroethylene patency versus porosity, Ann. Surg., 1985, No. 182, 138-141.
  • [23] CHEN Q., Investigation of corona charge stability mechanisms in polytetrafluoroethylene (PTFE) teflon films after plasma treatment. Journal of Electrostatics, 2003, No. 59, 3-13.
  • [24] CHERIFI A., ABOU-DAKKA M., TOUREILLE A., The validation of the thermal step method, IEEE Trans. Electr. Insul., 1992, Vol. 27, No. 6, 1152-1158.
  • [25] CHUDLEIGH P. W., Charging of polymer foils using liquid contacts, Appl. Phys. Lett., 1972, Vol. 21, No. 11,547-548.
  • [26] CHUDLEIGH P. W., Mechanism of charge transfer to a polymer surface by a conducting liquid contact, J. Appl. Phys., 1976, Vol. 47, 4475-4483.
  • [27] CHULDEIGH P. W., COLLINS R. E., HANCOCK G. D., Stability of liquid charged electrets, Appl. Phys. Lett., 1973, Vol. 23, No. 5, 211-212.
  • [28] CIACH T., GRADOŃ L., Optimization of the Electret Fibrous Structures, J. Aerosol Science, 1997, Vol. 28, 393-394.
  • [29] CIACH T., GRADOŃ L., Otrzymywanie elektretowych włóknin filtracyjnych, [w:] Sympozjum Naukowo-Techniczne, Białystok, 1999, 34-41.
  • [30] CIACH T., L. G., Highly Efficient Filtering materials, J. Aerosol Science, 1996, Vol. 27, No. 1, S613-S614.
  • [31] COLLINS R. E., Analysis of spatial distributions of charges and dipoles in electrets by a transient heating technique, J. Appl. Phys., 1976, Vol. 47, 4804-4808.
  • [32] COLLINS R. E., Distribution of charge in electrets, Appl. Phys. Lett., 1975, Vol. 26, 675-680.
  • [33] COLLINS R. E, Measurement of charge distribution in electrets, Rev. Sci. Instr., 1977, Vol. 48, 83-91.
  • [34] COLLINS R. E., The thermal pulsing technique applied to polimer electrets, Ferroelectrics, 1981, Vol. 33, 65-74.
  • [35] CROITOROU M. Z., Mesure de I'etat d'electrisation des familles isolantes, Rev. Gen. Electr., 1959, Vol. 68, 489-495.
  • [36] DARBY C. R., ROY D., DEARDON D., CORNALL A., Depopulated bovine ureteric xenograft for complex haemodialysis vascular access, Eur. J. Vase. Endovasc. Surg., 2006, Vol. 31, 181-186.
  • [37] DING H., Charge decay and transportation in teflon AF films, [w:] 8th Intern. Symp. on Electrets, Paris, 1994, 89-94.
  • [38] EDWARDS W. S., Arterial grafts, Arch. Surg., 113, 1978, No. 113, 1225-1233.
  • [39] EGUCHI M., On dielectric polarization, Proc. Phys.-Math. Soc. Japan, 1919, No. 1, 326-330.
  • [40] EGUCHI M., Variation of electrical conductivity of oils and waxes, Proc. Phys.-Math. Soc. Japan, 1919, No. 1, 320-325.
  • [41] EISENMENGER W., HAARDT M., Observation of charge compensated polarization zones in polyvinylidenefluoride (PVDF) films by piezoelectric acoustic step-wave response, Solid State Commun., 1982, Vol. 41, No. 12, 917-920.
  • [42] EMI H, Fundamentals of particle separation and air filters, J. Aerosol Science, 1991, Vol. 22,727- 730.
  • [43] ENGBERS-BUIJTENHUIJS P., BUTTAFOCO L., POOT A. A., Biological characterisation of vascular grafts cultured in a bioreactor, Biomaterials, 2006, Vol. 27, 2390-2397.
  • [44] FEAST W. J., MUNRO H. S., RICHARDS R. W., Polymer surfaces and interfaces II, John Wiley & Sons, Chichester-New York-Brisbane-Toronto-Singapore 1993.
  • [45] FELTHAM F. J., The Hansen Filter, Filtration Separation, 1979, Vol. 16, No. July/August, 370-372.
  • [46] FJELD R. A., OWENS T. M., The Effect of Particle Charge on Penetration in an Electret Filter, IEEE Transactions on Industry Applications, 1988, Vol. 24, No. 4, July/August, 725-731.
  • [47] FLEMING R. J., MARKIEWICZ A., Activation energy distributions for electron traps in polystyrene, IEEE Trans. Electr. Insul., 1987, Vol. EI-22, No. 1, 29-33.
  • [48] FLORIAN A., LAWRENCE H. C, DAMMIN C. J., COLLINS J. J. J., Small vessel replacement with Gore-Tex (Expandenpolytetrafluoroethylene), Arch. Surg., 1976, No. 111, 267-270.
  • [49] FORBES C. D., PRANTICA C. R. M., Thrombus formation and artificial surfaces, Br. Med. Bull., 1978, Vol. 34, 201-207.
  • [50] FUJIWARA Y., COHN L. H., ADAMS D., COLLINS JR. J. J., Use of Gore-Tex grafts for replacement of the superior and inferior venae cavae, J. Thorac. Cardiovasc. Surg., 1974, Vol. 67, 774-779.
  • [51] GAUNT L. F., JERRIM K. L., HUGHES J. F., Electrostatic control of domestic dust and allergen particles for improved air quality, Powder Technology, 2003, Vol. 135-136, 354-360.
  • [52] GERHARD-MULTHAUPT R., Analysis of pressure-wave methods for the nondestructive determination of spatial charge or field distributions in dielectrics, Phys. Rev. B., 1983, Vol. 27, No. 4,2494-2503.
  • [53] GERHARD-MULTHAUPT R., Poly(vinylidene fluoride): a piezo-, pyro-, and ferroelectric polymer and its poling behaviour, Ferroelectrics, 1987, Vol. 75, 385-396.
  • [54] GERHARD-MULTHAUPT R., HAARDT M., EISENMENGER W., SESSLER G. M., Electric-field profiles in electron-beam-charged polymer electrets, J. Phys. D:Appl. Phys., 1983, Vol. 16, 2247-2256.
  • [55] GERHARD-MULTHAUPT R., SESSLER G. M., WEST J. E., HOLDIK K., HAARDT M., EISENMENGER W., Investigation of piezoelectricity distributions in poly (invylidene fluoride) by means of quartz - or laser-generated pressure pulses, J. Appl. Phys., 1984, Vol. 55, 2769-2775.
  • [56] GŁOWIŃSKI S., Aktywność hemostatyczna biomateriałów, [w:] Problemy biocybernetyki i inżynierii biomedycznej, Praca zbiorowa pod red. M. Nałęcza, t. 4, Biomateriały 98, pod red. H. Kusia, WKŁ, Warszawa 1990, 133-139.
  • [57] GŁOWIŃSKI S., Właściwości hemostatyczne przeszczepów tylnych i poliestrowych, Pol. Przeg. Chir., 1982, t. 54, 485-493.
  • [58] GŁOWIŃSKI S., FARBISZEWSKI R., The heparin neutralizing activity of venous and polyester aortic grafts, J. Cardiovasc. Surg., 1981, Vol. 22, 54-57.
  • [59] GŁOWIŃSKI S., WOROWSKI K., Badania nad wpływem syntetycznych protez naczyniowych na układ krzepnięcia krwi i fibrynołizy, Polimery w Med., 1972, nr 2, 323-330.
  • [60] GŁOWIŃSKI S., WOROWSKI K., Blood platelet interaction with synthetic vascular prostheses, Polimery w Med., 1973, nr 3, s. 23-29.
  • [61] GŁOWIŃSKI S., WOROWSKI K., Local activation of blood coagulation by polyester prostheses implanted into defects of the abdominal aorta of dogs, Polimery w Med., 1977, nr 7, 241-243.
  • [62] GOTT V. L., FURUSE A., Antithrombogenic surfaces, classification and in vivo evaluation, Fed. Proc, 1971, No. 30, 1679-1685.
  • [63] GRASEL T. G., PIERCE J. A., COOPER S. L., Effects of alkyl grafting on surface properties and blood compatibility of polyurethane block copolymers, J. Biomed. Mat. Res., 1987, Vol. 21, 815-842.
  • [64] GROSS B„ GIACOMETTI J. A., LEAL FERREIRA G. F., Charge storage and transport in electron - irradiated dielectrics, IEEE Trans. Nuc. Sci., 1981, Vol. NS 28, 4513-4522.
  • [65] GROSS B., HESSEL R., Electron emission from electron - irradiated dielectrics, IEEE Trans. Electr. Insul., 1991, Vol. 26, No. 1, 18-25.
  • [66] GROSS B., SEGGERN VON H., WEST J. E., Positive charging of fluorinated ethylene propylene copolymer (Teflon) by irradiation with low energy electrons, J. Appl. Phys., 1984, Vol. 56,2333-2336.
  • [67] GROSS B., SESSLER G. M., WEST J. E., Charge dynamics for electron -irradiated polymer - foil electrets, J. Appl. Phys., 1974, Vol. 45, No. 7, 2841-2851.
  • [68] GROSS B., SESSLER G. M., WEST J. E., Location of charge centroid in electron-beam charged polymer films, J. Appl. Phys., 1977, Vol. 48, No. 10, 4303-4306.
  • [69] GUNTER D., EBERLE G., BIHLER E., EISENMENGER W., Space charge and polarization in PETP at different temperatures, [w:] 7th Intern. Symp. on Electrets, Berlin, 1991, 343-348.
  • [70] GUNTHER P., Determination of charge density and charge centroid location in electrets with semiconducting substrates, IEEE Trans. Electr. Insul., 1997, Vol. 27, 698-702.
  • [71] HAAN DE P. H, TOURNHOUT VAN J., WAPENAAR K. E. D., Fibrous and granular filters with electrically enhanced dust capturing efficiency, IEEE Trans. Electr. Insul., 1986, Vol. EI-21,465-472.
  • [72] HANSEN N. L., Method of the manufacture of smoke filters or collective filters, British Patent BP384052, 1931.
  • [73] HENNIN C., LEWINER J., A new principle for the design of condenser electret transducers, J. Acoust. Soc. Am., 1978, Vol. 63, No. 4, 1229-1231.
  • [74] HESS F., History of (micro) vascular surgery and the development of smallcaliber, Microsurgery, 1985, No. 6, 59-69.
  • [75] HILCZER B., MAŁECKI J., Elektrety i piezopolimery, PWN, Warszawa 1992.
  • [76] HOFFMANN A. S., Ionizing radiation and gas plasma (or glow) discharge treatments for preparation of novel polymeric biomaterials, Adv. Polym. Sci., 1984, Vol. 57, 141-157.
  • [77] HORENSTEIN M. N., Surface charging limit for a woven fabric on a ground plane, Journal of Electrostatics, 1995, Vol. 35, 31-40.
  • [78] HUANG P. Y., HELLUMS J. D., Aggregation and disaggregation kinetics of human blood platelets: Part I. Development and validation of a population balance method, Biophysical Journal, July 1993, Vol. 65, 334-343.
  • [79] HUANG P. Y., HELLUMS J. D., Aggregation and disaggregation kinetics of human blood platelets: Part II. Shear-induced platelet aggregation, Biophysical Journal, July 1993, Vol. 65, 344-353.
  • [80] HUANG P. Y., HELLUMS J. D., Aggregation and disaggregation kinetics of human blood platelets: Part III. The disaggregation under shear stress of platelet aggregates, Biophysical Journal, July 1993, Vol. 65, 354-361.
  • [81] HUANG Z. M., ZHANG Y. Z., KOTAKI M., RAMAKRISHNA S., A review on polymer nanofibers by electrospinning and their applications in nanocomposites, Composites Science and Technology, 2003, Vol. 63, 2223-2253.
  • [82] IKEZAKI K., YAGISHITA A., YAMANOUCHI H, Charge trapping in spherolitic polypropylene, [w:] 8th Intern. Symp. on Electrets, Paris, 1994, 428-433.
  • [83] INCULET I. I., CASTLE G. S. P., SLANINA M., DUCA M., Pseudoelectret filter for micrometer-sized particles in exhaust gases at 210 °C, IEEE Trans, on Industry Applications, 2002, Vol. 38, No. 1, 64-68.
  • [84] JAROSZ-CICHULSKA H., Polimery syntetyczne, [w:] Problemy biocybernetyki i inżynierii biomedycznej. Praca zbiorowa pod redakcją M. Nałęcza, t. 4, Biomateriały pod red. H. Kusia, WKŁ, Warszawa 1990, 56-66.
  • [85] JAWOREK A., KRUPA A., CZECH T., Modern electrostatic devices and methods for exhaust gas cleaning: A brief review, Journal of Electrostatics, 2007, Vol. 65, 133-155.
  • [86] JAWORSKI Z., Badania laboratoryjne i biologiczne różnych rodzajów protez naczyniowych, Polimery w Med., 1977, t. VII, nr 1, 57-67.
  • [87] JEONG S. I., KIM S. H, KIM H. A., Manufacture of elastic biodegradable PLCL scaffoldsfor mechano-active vascular tissue engineering, J. Biomater. Sci. Polymer Edn., 2004, Vol. 15, 645-660.
  • [88] JI J. H., BAE G. N., KANG S. H., HWANG I, Effect of particle loading on the collection performance of an electret cabin air filter for submicron aerosols, Aerosol Science, 2003, Vol. 34, 1493-1504.
  • [89] JODCZYK K. J., DĄBROWSKI A., Proces wgajania się protez naczyniowych dwustronnie welurowych typu Dallon w tętnicy brzusznej psów, Polimery w Med., 1987, t. XVTI, nr 1-2,29-42.
  • [90] JÓZEFOWICZ M., JÓZEFOWICZ J., Antithrombogenie polymers, Pure and Appl. Chem., 1985, Vol. 56, No. 10,1335-1344.
  • [91] JÓZEFOWICZ M., JÓZEFOWICZ J., Heparin containing and heparin-like materials, [w:] Polymers in Medicine, Vol.2, Plenum Press, New York 1986.
  • [92] KACPRZYK R., ŁOWKIS B., Elektretowy przetwornik drgań, Int.Cl.7 H04R 17/00. 181596, Aug. 31,2001.
  • [93] KACPRZYK R., ŁOWKIS B., High gradient fabrics, [w:] 11th International Symposium on Electrets. ISE 11. Proceedings, Melbourne, 2002, 302-305.
  • [94] KACPRZYK R., ŁOWKIS B., MOTYL E., Elektretowe właściwości włóknin filtracyjnych, [w:] Pola elektrostatyczne i elektromagnetyczne - nowe materiały i technologie, TV Międzynarodowe Sympozjum EL-TEX 2000, Łódź, 2000, 204-211.
  • [95] KACPRZYK R., ŁOWKIS B., BUGAJSKI M., Ocena czasu życia elektretów foliowych, [w:] Postępy w elektrotechnołogii. III Konferencja naukowa, Szklarska Poręba, 1998, 281-283.
  • [96] KACPRZYK R., MIŚTA W., Back corona in fabrics, Fibres and Textiles In Eastern Europe, 2006, Vol. 14, No. 5 (59), 35-38.
  • [97] KACPRZYK R., MIŚTA W., The surface potential of perforated dielectric layers, IEEE Trans. Diel. Electr. Insul., October 2006, Vol. 13, No. 5, 986-991.
  • [98] KALIŃSKA D., Metody otrzymywania atrombogennych powierzchni, [w:] Problemy biocybernetyki i inżynierii biomedycznej. Praca zbiorowa pod redakcją M. Nałęcza, t. 4, Biomateriały, pod red. H. Kusia, WKŁ, Warszawa 1990, 151-155.
  • [99] KANEHIRA K, BANZAI T., OGINO C, SHTMIZU N, KUBOTA Y., SONEZAKI S., Properties of Ti02 - polyacrylic acid dispersions with potential for molecular recognition, Colloids and Surfaces B: Biointerfaces, 2008, Vol. 64, 10-15.
  • [100] KASJANIENKO W. W., i in., New textile polymer prosthesis of polymer compositions, Polymers in Medicine, 1987, Vol. 17, No. 1-2, 43-55.
  • [101] KELLER J. M., VYAS K. D., DUBEY R. K„ DATT S. C, Charge storage and transport behavior of pure and anthracene doped poly methyl methacrylate (PMMA) foils, [w:] 8th Intern. Symp.on Electrets, Paris, 1994, 494-499.
  • [102] KĘDZIA J., Zagrożenia izolacji transformatorów energetycznych wywołane elektryzacją statyczną, Oficyna Wydawnicza Politechniki Opolskiej, Opole, 1999.
  • [103] KINLEY C. E., MARBLE A. E., Compliance: A continuing problem with vascular grafts., J. Cardiovasc. Surg., 1980 , No. 21, 163-170.
  • [104] KIRBY B. J., HASSELBRINK E. F. J., Zeta Potential of Microfluidic Substrates: 1. Theory, experimental techniques, and Effects on Separations, Electrophoresis, 2004, Vol. 25, 187-202.
  • [105] KISIEL A., ŁOWKIS B., Rola parametrów technologicznych w procesie otrzymywania, elektretowych włóknin filtracyjnych, Przegląd Elektrotechniczny, 2004, t. 2, nr 1, 114-116.
  • [106] KISIEL A., ŁOWKIS B., The influence of manufacturing process on electret fabrics structure. Wpływ procesu technologicznego na strukturę włóknin elektretowych, [w:] II International Conference on Advances in Processing, Testing and Applications of Dielectric Materials.APTADM'2004, Wrocław, 2004, 276-281.
  • [107] KISIEL A., ŁOWKIS B., Wpływ warunków elektryzacji na czas życia elektretowych włóknin polipropylenowych, Przegląd Elektrotechniczny, 2004, t. 2, nr 1, 117-119.
  • [108] KISIEL A., ŁOWKIS B., PARADOWSKA A., Wpływ procesu elektryzacji na właściwości filtracyjne włóknin polimerowych, Przegląd Elektrotechniczny, 2002, t. 78, nr 10, 159-162.
  • [109] KISIEL A., ŁOWKIS B., PARADOWSKA A., Wybrane właściwości elektrostatyczne włóknin polipropyłenowych, [w:] Postępy w elektrotechnologii, V Konferencja naukowa, Jamrozowa Polana, 2003, 117-120.
  • [110] KISIEL A., ŁOWKIS B., SOZAŃSKI T., Wpływ parametrów procesu technologicznego na elektrostatyczne właściwości włóknin filtracyjnych, [w:] Postępy w elektrotechnologii. V Konferencja naukowa, Jamrozowa Polana, 2003, 121-127.
  • [111] KOCHERVINSKIJ V. V., KUZMINA N. N., SOKOLOVA I. M., Stability of PTFE electrets in dependence on material structure, [w:] 7th Intern. Symp. on Electrets, Berlin, 1991, 117-122.
  • [112] KOCHWA S., LITWAK R. S., ROSENFIELD R. E., LEONARD E. F., Blood elements at foreing surfaces: A biochemical approach to the study of the adsorption of plasma proteins, Ann N. Y. Acad. Sci., 1977, No. 283, 37-49.
  • [113] KRESSMANN R., SESSLER G. M., GUNTHER P., Space-charge electrets, IEEE Trans, on Dielectrics and Electrical Insulation, 1996, Vol. 3, No. 5, 607-623.
  • [114] KRUCIŃSKA I., The influence of technological parameters on the filtration efficiency of electret needled non-woven fabrics, Journal of Electrostatics, 2002, Vol. 56, 143-153.
  • [115] KUŚ H, In vitro testing of biocompatibility of biomedical polymers - 28 years experience, Polymers in Medicine, 1988, Vol. 18, No. 3, 110-112.
  • [116] KUŚ H., GÓRA G., Materiały i wyroby biomedyczne, Polimery w Med., 1979, r. 11, nr 1, 19-30.
  • [117] KWETKUS B. A., Particle precharging and fabric filtration -experimental results of a corona precharger, Journal of Electrostatics, 1997, Vol. 40-41, 657-662.
  • [118] LANG S. B., Laser intentisity modulation method /LIMM/: Experimental techniques, theory and solution of the integral equation, Ferroelectrics, 1991, Vol. 118, 343-361.
  • [119] LANG S. B., DAS-GUPTA D. K., A new technique for determination of the spatial distribution of polarization in polymer electrets, Ferroelectrics, 1984, Vol. 60, 23-36.
  • [120] LANG S. B., DAS-GUPTA D. K., A technique for determining the polarization distribution in thin polymer electrets using periodic heating, Ferroelectrics, 1981, Vol. 39, 1249-1252.
  • [121] LANG S. B., DAS-GUPTA D. K., Complex polarization distributions in PVDF samples, Ferroelectrics, 1984, Vol. 55, 151-154.
  • [122] LANG S. B., DAS-GUPTA D. K., Laser intensity modulation method (LIMM): A technique for determination of spatial distributions of polarization and space charge in polymer electrets, J. Phys. D: Appl. Phys., 1986, Vol. 59, 2151-2160.
  • [123] LANG S. B., DAS-GUPTA D. K., Polarization and space charge distribution in thermally poled polyethylene and a comparison with polyvinylidene fluoride, IEEE Trans. Elect. Insul., 1986, Vol.EI-21, No. 3, 399-403.
  • [124] LANG S. B., QUING-RUI Y., Spatial distributions of polarization and space charge in thin-substituted lead zirconate titanate ceramics using laser intensity modulation method (LIMM), Ferroelectrics, 1987, Vol. 74, 357-368.
  • [125] LATOUR M., DONNET G., Detection of internal field strength in polyethylene by means of ionic dopants, Journal of Electrostatics, 1979, Vol. 8, 81-87.
  • [126] LELAH M. D., COOPER S. L., Basic concepts in blood materials interaction. In: Polyurethanes in medicine, Boca Raton, CRS Press, 1985.
  • [127] LELAH M. D., COOPER S. L., Ex vivo interaction and surface properties relationships of polyurethanes, J. Biomed. Mat. Res., 1986, Vol. 20, No. 4, 433-468.
  • [128] LELAH M. D., JORDAN C. A., DARISO M. E., LAMBRECHT L. K, COOPER S. L, ALBRECHT R. M., Morphological changes occurring during thrombo- genesis and embolization on biomaterials in a canine ex-vivo series shunt, Scanning Electron Microscopy, 1983, Vol. IV, 1983-1984.
  • [129] LEPIDI S., GREGO F., VINDIGNI V., Hyaluronan biodegradable scaffold for small-caliber artery grafting: preliminary results in an animal model, Eur. J. Vase. Endovasc. Surg., 2006, Vol. 32, 411—417.
  • [130] LEWANDOWSKI R., RUTOWSKI R, STANISZEWSKA - KUŚ J., PIELKA S., ZBOROMIRSKA-WNUKIEWICZ B., Odczyn tkankowy po implantacji biomateriałów ceramicznych z wprowadzonym na powierzchnią potencjałem elektrokinetycznym zeta, Polimery w Med., 2004, t. 34, nr 1,13-25.
  • [131] LU T. J., SESSLER G. M., An experimental study of charge distributions in electron-beam irradiated polypropylene films, IEEE Trans. Electr. Insul., 1991, Vol. 26, 228-235.
  • [132] LYMAN D. J., Structural order and blood compatibility of polymeric prostheses, [w:] Structural order in polymers, Oxford Pergamon Press, 1981.
  • [133] LYMAN D. J., ET.AL. , The effect of chemical structure and surface properties of synthetic polymers on the coagulation of blood. PA. The relationship between polymer morphology and protein absorption, Trans. Amer. Soc. Artif. Int. Organs., 1975, Vol. 21, 48-53.
  • [134] ŁOWKIS B., Badanie rozkładu ładunku przestrzennego w foliach polimerowych metodą wirtualnej elektrody, [w:] Ładunek przestrzenny w dielektrykach i jego wpływ na ich własności elektryczne. Sympozjum Ogólnokrajowe'84. Materiały, WSI, Zielona Góra, 1984,125-131.
  • [135] ŁOWKIS B., Elektrety jako materiały atrombogenne, [w:] Problemy biocybernetyki i inżynierii biomedycznej, Praca zbiorowa pod red. Macieja Nałęcza, t. 4. Biomateriały, pod red. Henryka Kusia, WKŁ, Warszawa 1990, 159-164.
  • [136] ŁOWKIS B., Ocena właściwości elektretowych folii polipropylenowej, [w:] Postępy w elektrotechnologii. Materiały konferencyjne, Szklarska Poręba, 1994,137-142.
  • [137] ŁOWKIS B., Rola ładunku elektrycznego w procesie adhezji elementów morfotycznych krwi, [w:] Inżynieria wysokich napiąć IW-94. II Ogólnopolskie sympozjum, Poznań-Kiekrz, 1994, 145-148.
  • [138] ŁOWKIS B., Średnie położenie ładunku elektrycznego w elektretach foliowych, [w:] Postępy w elektrotechnologii. Materiały konferencyjne, Szklarska Poręba, 1994, 131-135.
  • [139] ŁOWKIS B., Techniki pomiarowe przy badaniach elektrostatycznych właściwości folii polimerowych, Polimery w Med., 1980, t. 10, nr 1, 31-39.
  • [140] ŁOWKIS B., Wpływ biologicznych płynów modelowych na elektrostatyczne właściwości ełektretów z dzianych poliestrowych protez powięzi mięśni „Dallop", Polimery w Med., 1980, t. 10, nr 3, 135-156.
  • [141] ŁOWKIS B., Wpływ efektu ełektretowego na atrombogenność folii polietylenowej, [w:] ELSTAT '85. Trzecia Konferencja Elektrostatyki. Materiały konferencyjne. Wrocław: PWr, Kraków, 1985, 27-31.
  • [142] ŁOWKIS B., Wpływ ładunku elektrycznego na adhezję krwinek płytkowych, [w:] I Sympozjum nauk.-techn. nt. Nowoczesne przemysłowe technologie elektrostatyczne, Białystok, 1986, 126-130.
  • [143] ŁOWKIS B., Wpływ ładunku przestrzennego na atrombogenność folii polietylenowej, [w:] Ładunek przestrzenny w dielektrykach i jego wpływ na ich własności elektryczne. Sympozjum Ogólnokrajowe'84. Materiały, WSI Zielona Góra, 1984, 117-124.
  • [144] ŁOWKIS B., Wpływ płynów modelowych na elektrostatyczne właściwości ełektretów z folii poliestrowej, Polimery w Med., 1980, Vol. 10, No. 1, 41-52.
  • [145] ŁOWKIS B., MOTYL E., Electret properties of polypropylene fabrics, Journal of Electrostatics, 2001, Vol. 51/52, 232-238.
  • [146] ŁOWKIS B., MOTYL E., Elektryczne własności elektretowych wkładek mikrofonowych elektryzowanych wiązką elektronów, [w:] Technologia elektronowa. I Konferencja naukowa. ELTE-80. 24—27 września 1980, Prace Naukowe Instytutu Technologii Elektronowej Politechniki Wrocławskiej nr 24, Konferencje nr 4, Wrocław-Karpacz, 1980, 134—136.
  • [147] ŁOWKIS B., MOTYL E., Investigation of the organic electrets lifetime, Materials Science, 1981, Vol. 7, No. 2/3,251-255.
  • [148] ŁOWKIS B., MOTYL E., Microphonic membranes forming with the liquid method, Materials Science, 1990, Vol. 16, No. 1-3, 261-265.
  • [149] ŁOWKIS B., MOTYL E., Ocena wpływu czynników środowiskowych na elektrostatyczne właściwości włóknin polipropylenowych, Przegląd Elektrotechniczny, 2006, t. 4, nr 1, 148-151.
  • [150] ŁOWKIS B., RAUBUĆ Z., Cieczowa metoda formowania elektretów, Polimery w Med., 1983, t. 13, nr 3/4, 161-172.
  • [151] ŁOWKIS B., ROSIAK D., Wykorzystanie efektu elektretowego w procesie przygotowania atrombogennych protez naczyniowych, [w:] Inżynieria wysokich napiąć IW-96. III Ogólnopolskie sympozjum, Poznań-Kiekrz, 1996, 99-104.
  • [152] ŁOWKIS B., SZYMONOWICZ M., An assessment of athrombogenic properties of electret polyethylene film, Polimery w Med., 1998, t. 1/2, 3-15.
  • [153] ŁOWKIS B., SZYMONOWICZ M., Does the liquid method of electret forming influence the adhesion of blood platelets?, Polimery w Med., 1995, Vol. 25, No. 1/2, 3-13.
  • [154] ŁOWKIS B„ SZYMONOWICZ M., Effect of electric charge on the adhesion of human blood platelets, Polimery w Med., 1993, Vol. 23, No. 3/4, 21-30.
  • [155] ŁOWKIS B., SZYMONOWICZ M., Effect of the electret-blood contact time on the adhesion of human blood platelets, Polimery w Med., 1993, Vol. 23, No. 3/4, 21-30.
  • [156] ŁOWKIS B., SZYMONOWICZ M., Influence of distribution of density of surface charge on adhesion of human blood platelets, Polimery w Med., 1994, Vol. 24, No. 1/2, 21-29.
  • [157] ŁOWKIS B., SZYMONOWICZ M., Wpływ ładunku elektrycznego na atrombogenność folii z polichlorku winylu, Polimery w Med., 1983, t. 13, nr 3/4, 151-160.
  • [158] ŁOWKIS B., SZYMONOWICZ M., Wpływ ładunku elektrycznego na wyniki badań tromboelastograficznych krwi ludzkiej, Polimery w Med., 1981, t. 11, nr 3/4, 191-202.
  • [159] ŁOWKIS B., SZYMONOWICZ M., RUTKOWSKI J., An investigation into vascular prosthesis modified with an electron beam. Badanie poliestrowych protez naczyniowych modyfikowanych wiązką elektronów, Polimery w Med., 1997, t. 27, nr 3/4, 19-26.
  • [160] ŁOWKIS B., ZBOROMIRSKA-WNUKIEWICZ B., GRYZŁO K., Wpływ ładunku elektrycznego na potencjał elektryczny na granicy faz: proteza naczyń krwionośnych-krew, Przegląd Elektrotechniczny, 2008, t. 84, nr 10, 108-111.
  • [161] ŁUKASIEWICZ A., DREWA T., MOLSKI S., Postępy w inżynierii naczyń krwionośnych, Pol. Merk. Lek., 2007, t. XXIII, nr 138, 439-442.
  • [162] MAENO T., FUTAMI T., KUSHIBE H., TAKADA T., Measurement and simulation of the spatial charge distribution in electron-beam irradiated polymers, J. Appl. Phys., 1989, Vol. 65, 1147-1151.
  • [163] MAENO T., FUTAMI T., KUSHIBE H, TAKADA T., COOKE M. C, Measurement of spatial charge distribution in thick dielectrics using the pulsed electroacoustic method, IEEE Trans. Diel. Electr. Insul., 1988, Vol. 23, No. 3, 433-439.
  • [164] MAHAJAN S. M., SUDARSHAN T. S., Measurement of space charge field in transformer oil using its Kerr effect, IEEE Trans. Diel. Electr. Insul., 1994, Vol. 1, 63-70.
  • [165] MARCINIAK J., Biomateriały, Politechnika Śląska, Gliwice 2002.
  • [166] MATSUMOTO H, HASEGAWA T., FUSE K., YAMANOTO M., SAIGUSA M., A new vascular prosthesis for small caliber artery, Surg., 1973, Vol. 74, 519-523.
  • [167] MATSUURA S., TAKAMATSU T., Electret state in blendmers of polypropylene, PP grafted with malelc anhidride and policarbonate, [w:] IX International Symposium of Electrets, Shanghai, 1996, 487-492.
  • [168] MEJBAUM-KATZENGLENBOGEN W., MOCHNACKA L, Kurs praktyczny z biochemii, PWN, Warszawa 1969.
  • [169] MEKISHEV G. A., YOVCHEVA T. A., GENTCHEVA E. A., NEDEV S. R., Study of electrets stored at pressures lower than atmospheric, Journal of Electrostatics, 2005, No. 63, 1009-1015.
  • [170] MILLINGTON H. L., DAVIS J., EDMARK K. W., The search for correlation between electrokinetic phenomena and blood thrombus formation on implant materials, J. Biomed.Mater. Res., 1968, Vol. 2, 51-79.
  • [171] MOPSIK F. I., DE REGGI A. S., Numerical evaluation of the dielectric polarization distribution from thermal pulse data, J. Appl. Phys., 1982, Vol. 53, 4333-4339.
  • [172] MORENO R. A., GROSS B., Measurement of charge buildup and decay, surface charge density, and charging currents of corona - charged polymer foil electrets, J. Appl. Phys., 1976, Vol. 47, 3397-3402.
  • [173] MOSHKIN A. A., MOSHKINA S. A., Electrical filters made of polymer materials, Journal of Electrostatics, 1997, Vol. 40&41, 681-685.
  • [174] MOTYL E., Ładunek przestrzenny w dielektrykach stałych. Analiza metod pomiarowych. Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii PWr. Seria: Monografie, Oficyna Wyd. Politechniki Wrocławskiej, Wrocław 2000.
  • [175] MOTYL E., Pressure methods of space charge measurement in dielectrics, Journal of Electrostatics, 1997, Vol. 40-41, 469-476.
  • [176] MOTYL E., ŁOWKIS B., Comparison of the electret properties of different microphonic membranes, Materials Science, 1990, Vol. 16, No. 1-3, 255-259.
  • [177] MOTYL E., ŁOWKIS B., Effect of air humidity on charge decay and lifetime of PP electret nonwovens, Fibres Text. East. Eur., 2006, Vol. 14 , No. 5, 39-42.
  • [178] MOTYL E., ŁOWKIS B., RUCKI E., Badania zaniku ładunku we włókninach elektretowych metodą termicznie stymulowanego napięcia zastępczego, [w:] Pola elektrostatyczne i elektromagnetyczne - nowe materiały i technologie. EL-TEX 2004. VI Międzynarodowe sympozjum, Łódź, 2004, 39-46.
  • [179] MOTYL E., ŁOWKIS B., RUCKI E., Właściwości dielektryczne domieszkowanej ceramiki kondensatorowej, Przegląd Elektrotechniczny, 2008, 1984, nr 10, 181-184.
  • [180] MOYER E. S., STEVENS G. A., "Worst Case" aerosol testing parameters: II. Efficiency dependence of commercial respirator filters on humidity pretreatment, American Industrial Hygiene Association Journal, 1989, Vol. 50, 265-270.
  • [181] MURPHY P., LACROIX A., MERCKANT S., BERMHARD W., Persistant polarization in polymers and blood compatibility, J. Macromol. Sci.-Chem., 1970, Vol. A4/3/, 564-580.
  • [182] NAITO Y., YASUHARU I., SHIN'OKA T., Successful clinical application of tissueengineered graft for extracardiac Fontan operation, J. Thorac. Cardiovasc. Surg., 2003, Vol. 125, 419-420.
  • [183] NAŁĘCZ M., Problemy biocybernetyki i inżynierii biomedycznej, t. 4, Biomateriały, pod red. H.Kusia, WKŁ, Warszawa 1990.
  • [184] NIFUKU M., KISIEL A., HAJOS G., KOGURE N., KANAOKA C, SATO S„ ASADA S.,A study to develop environmentally acceptable electret filter, [w:] X International Symposium on Electrets, Delphi, 1999, 739-742.
  • [185] OKANO T., AOYAGIT., KATAOKA K, ABE K, SAKURAI Y., SHIMADA M., SHINOHARA L,Hydrophilic-hydrophobic microdomain surfaces having and ability to suppress platelet aggregationand their in vitro antithrombogenicity , J.Biomed. Mat. Res., 1986, Vol. 20, 919-927.
  • [186] OKANO T, URUNO M., SUGIYAMA N., SHIMADA M., SHINOHARA I., KATAOKA K., SAKURAI Y., Suppression of platelet activity on microdomain surfaces of 2-hydroxyethyl methacrylate -polyether block copolymers, J. Biomed. Mater. Res., 1986, Vol. 20, No. 7,1035-1054.
  • [187] ONO R., NAKAZAVA M., ODA T., Charge storage in corona-charged polypropylene films analyzed by LIPP and TSC metods, IEEE Trans. Ind. Appl., 2004, Vol. 40, 1482-1487.
  • [188] PARK J., Biomaterials science and engineering, Plenum Press, New York 1984.
  • [189] Polska Norma, PN/EN 143 - Sprzęt ochrony układu oddechowego FILTRY.
  • [190] Polska Norma, PN/EN 149-Sprzęt ochrony układu oddechowego PÓŁMASKI FILTRUJĄCE.
  • [191] Polska Norma, PN/EN 87/Z-0201015 - Metoda wyznaczania wskaźnika filtracji przy użyciu cząstek chlorku sodu.
  • [192] REEDYK C. W., PERLMAN M. M., The measurement of surface charge, J. Electrochem. Soc, 1968, Vol. 115, 45-49.
  • [193] REICHLE F. A., STEWART G. J., ESSA N., A transmission and scanning electron microscopic study of luminal surfaces in Dacron and autogenous vein by-passes in man and dog, Surgery, 1973, Vol. 74, 945-960.
  • [194] ROMAY F. J., LIU B. Y. H., CHAE S.J., Experimental study of electrostatic capture mechanisms in commercial electret filters, Aerosol Science and Technology, 1998, Vol. 28, No. 3, 224-234.
  • [195] SAE-LIM W., TANTHAPANICHAKOON W., KANAOKA C., Correlation for the efficiency enhancement factor of a single electret fiber, Aerosol Science, 2006, Vol. 37, 228-240.
  • [196] SALZMAN E. W., Nonthrombogenic surfaces.-Critical review, Blood, 1971, No. 38, 509-523.
  • [197] SALZMAN E. W., LINDON J., BRIER D., MERRIL E. W., Surface-induced platelet adhesion, aggregation, and release, Ann. N.Y. Acad. Sci., 1977, No. 283, 114—127.
  • [198] SARKAR S., SALACINSKI H. J., HAMILTON G., SEIFALIAN A. M., The mechanical properties of infrainguinal vascular bypass grafts: their role in influencing patency, Eur. J. Vase. Endovasc. Surg., 2006, Vol. 31, 627-636.
  • [199] SAUVAGE L. R, BERGER K. E., MANSFTELD P. B., WOOD S. J., SMITH J. C., OVERTON J. B., Future directions in the development of arterial prostheses for small and medium caliber arteries, Surg. Clin. North Am., 1974, Vol. 54, 213-228.
  • [200] SAWYER P. N., STANCZEWSKI B., KIRSCHENBAUM D., Experiments with nonthrombogenic and thrombogenic collagen in laboratory and clinical use, Polimery w Med., 1981, Vol. 11, No. 1, 17-24.
  • [201] SEGGERN VON H., Charging dynamics of dielectrics irradiated by low energy electrons, IEEE Trans. Nuc. Sci., 1985, Vol. NS 4, 1503-1511.
  • [202] SEGGERN VON H., Identification of TSC peaks and surface voltage stability in Teflon-FEP, J. Appl. Phys., 1979, Vol. 50, No. 4, 2817-2821.
  • [203] SEGGERN VON H., New developments in charging and discharging of polymers, IEEE Trans. Electr. Insul., 1986, Vol. EI-21, No. 3, 281-288.
  • [204] SEGGERN VON H., WEST J. E., KUBLI R. A., Determination of charge centroids in two-side metallized electrets, Rev. Sci. Instrum., 1984, Vol. 55, 964- 967.
  • [205] SESSLER G. M., Charge dynamics in irradiated polymers, IEEE Trans. Electr. Insul., 1992, Vol. 27, 961-973.
  • [206] SESSLER G. M., Electrets, Springer-Verlag, Berlin-Heidelberg - New York 1980.
  • [207] SESSLER G. M., Electrets, Vol. 1, 3rd ed., Laplacian Press, Morgan Hill, CA, 1999.
  • [208] SESSLER G. M., Electrets: recent developments, Journal of Electrostatics, 2001, No. 51-52, 137-145.
  • [209] SESSLER G. M., Spatial depth and density of charge in electrets, J. Appl. Phys., 1972, Vol. 43, No. 2, 408-411.
  • [210] SESSLER G. M., ALQUIE C, J. L., Charge distribution in teflon FEP/fluoroethylene propylene/negatively corona-charged to high potentials, J. Appl. Phys., 1992, Vol. 71, 2280-2284.
  • [211] SESSLER G. M., WEST J. E., Charging of polymer foils with monoenergetic low-energy electron beams, Appl. Phys. Lett., 1970, No. 17, 507-509.
  • [212] SESSLER G. M., WEST J. E., Electrets formed by low-energy electron injections, Journal of Electrostatics, 1975, No. 1, 111-123.
  • [213] SESSLER G. M., WEST J. E., Production of high quasipermanent charge densities on polymer foils by application of breakdown fields, J. Appl. Phys., 1972, Vol. 43, No. 3, 922-926.
  • [214] SESSLER G. M., WEST J. E., BERKLEY D. A., MORGENSTERN G., Determinaltion of spatial distribution of charges in thin dielectrics, Phys. Rev. Lett., 1977, Vol. 38, No. 7, 368-371.
  • [215] SESSLER G. M., WEST J. E., GERHARD G., High-resolution laser-pulse method for measuring charge distributions in dielectrics, Physical Rev. Lett., 1982, Vol. 48, No. 8, 563-566.
  • [216] SESSLER G. M., WEST J. E., SEGGERN VON H, Electron beam method for detecting charge distribution in thin polyethyleneterephthalate films, J. Appl. Phys., 1982, Vol. 53, No. 6,4320-4327.
  • [217] SESSLER G. M., YANG G. M., Charge dynamics in electron-irradiated polymers, Braz. J. Phys., 1999, No. 29, 233-240.
  • [218] SHARP L. P., Experiences with negatively charged polurethane - backed velours, J. Biomed. Mat. Res. Symp., 1971, Vol. 1,75-81.
  • [219] SHENG S. J., HANSON D. M., Spectroscopic measurement of the space - charge distribution in insulators, semiconductors, andphotoconductors, J. Appl. Phys., 1974, Vol. 45, No. 11,4954-4956.
  • [220] SHIN'OKA T., MATSUMURA G. H. N, Midterm clinical result of tissue-engineered vascular autografts seeded with autologous bone marrow cells, J. Thorac. Cardiovasc. Surg., 2005, Vol. 129,1330-1338.
  • [221] SHU-TUNG W., A collagen-Dacron composite vascular graft for arterial reconstruction, [w:] Advance in biomedical polymers , Plenum Press, 1987.
  • [222] SMITH D. E., HAMMON J., ANANE-SEFAH J., RICHARDSON R. S., TRIMBLE C, Segmental venous replacement: a comparison of biological and synthetic substitutes, J. Thorac. Cardiovasc. Surg., 1975, No. 69,589-598.
  • [223] SOLSKI L., Badania doświadczalne protez Gore-Tex. Przegląd literatury, Polimery w Med., 1985, t. 15, nr 3-4, 67-77.
  • [224] SONNTAG H, Koloidy , PWN, Warszawa 1982.
  • [225] SOYER T., LEMPINEN M., COOPER P., NORTON L., EISEMAN B., A new venous prosthesis, Surgery, 1972, Vol. 72, 864-872.
  • [226] SQUIRES T. M., BAZANT M. Z., Induced-charge electro-osmosis, J. of Fluid Mechanics, 2004, Vol. 209, 217-252.
  • [227] SRINIVASAN S., SAWYER P. H., Correlation of the surface charge characteristics of polymers with their antithrombogenie characteristics, J. Macromol. Sci-Chem., 1970, Vol. A4/3/, 545-560.
  • [228] STENHOUSE J. I. T., TROTTTER R., The loading of fibrous filters with submicron particles, J. Aerosol Sci., 1991, Vol. 22, 774-780.
  • [229] STUPP S. J., KAUFMAN J. W., CARR S. H, Interaction between segmented polyurethane surfaces and the plasma protein fibrinogen, J.Biomed. Mat. Res., 1977, Vol. 11, 237-250.
  • [230] SWARTZ D. D., RUSSELL J. A., ANDREADIS S. T., Engineering of fibrin-based functional and implantable small-diameter vessels, Am. J. Physiol. Heart. Circ. Physiol., 2005, Vol. 3, 1451-1460.
  • [231] SZUMAKOW W. I., CZEPUROW A. K., KOZŁÓW W. K., KOZAKOWA T. J., Adhezija trombocitov napolimernych materiałach s elektretnymi swojstvami, Polimery w Med., 1975, t. 5, nr 3,247-252.
  • [232] SZYMONOWICZ M., ŁOWKIS B., In vitro testing method of polymers candidate destined for contact with blood, Polimery w Med., 1990, t. 20, nr 1-4, 43-55.
  • [233] SZYMONOWICZ M., ŁOWKIS B., Wpływ efektu elektretowego na atrombogenność folii polimerowych, [w:] Problemy biocybernetyki i inżynierii biomedycznej. Praca zbiorowa pod red. Macieja Nałęcza, t. 4, Biomateriały, pod red. H. Kusia, WKŁ, Warszawa 1990, 164-168.
  • [234] TAKADA T., MAENO T., KUSHIBE H., An electric stress-pulse technique for the measurement of charges in a plastic plate irradiated by an electron beam, IEEE Trans. Electr. Insul., 1987, Vol. 22, No. 4,497-501.
  • [235] TANAKA A., MAEDA M., TAKADA T., Observation of charge behaviour in organic photoconductor using pressure-wave propagation method, IEEE Trans. Electr. Insul., 1992, Vol. 27, No. 3,440-444.
  • [236] TOUREILLE A., REBOUL J. P., The thermal step technique applied to the study of charge decay in polyethylene thermoelectrets, 6th Int. Symp. on Electrets, 1988, 23-27.
  • [237] TRANQUILLO R. T., GIRTON T. S., BROMBEREK B. A., Magnetically orientated tissue-equivalent tubes: application to a circumferentially orientated media-equivalent, Biomaterials, 1996, Vol. 17, 349-357.
  • [238] TSAI PETER P., SCHREUDER-GIBSON H., GIBSON P., Different electrostatic methods for making electret filters, Journal of Electrostatics, 2002, Vol. 54, No. 4, 333-341.
  • [239] TURNHOUT VAN J., ALBERS J. H. M„ HOENEVELD W. J., ADAMSE J. W. C, ROSSEN VAN L. M., Non-woven electret fibre: a new filtering medium of high efficiency, [w:] Inst. Phys. Conf., Ser., No. 48, 1979, 337-349.
  • [240] TURNHOUT VAN J., BACHOVE VAN C., VELDHUIZEN VAN G. J„ Electret fibres for high-efficiency filtration of polluted gases, Sonderdruck aus Staub- Reinhaltung der Luft, 1976, No. 1, 36-39.
  • [241] TURNHOUT VAN J., HOENEVELD W. J., ADAMS J. W. C., ROSSEN VAN M., Electret filters for high-efficiency and high-flow air cleaning, IEEE Trans. Ind. Appl., 1981, Vol. IA-17, 240-248.
  • [242] TURNHOUT VAN J., ONG P. H, The investigation of solid dielectrics and methods of their testing, [w:] Proc. Int. Conf., Wroclaw, 1977, 133-140.
  • [243] VOORHEES JR. A. B., JARETZKI A., BLAKEMORE A. H, The use of tubes constructed from Vinyl „N" cloth in bridging arterial defects. A preliminary report, Ann. Surg., 1952, No. 135, 332-336.
  • [244] WALKER D. K., JEFIMIENKO O., A technique for measuring real volume charges in wax electrets, [w:] Electrets, Charge and Transport in Dielectrics, pod red. M. M. Perlman, Princeton, 1973,455-461.
  • [245] WALSH D. C, KANAOKA C, Modeling the loading behavior of fibrous filter materials: Part 2 - Electrically active materials, DRAFT 19/8/98.
  • [246] WALSH D. C, STENHOUSE J. I. T., Parameters affecting the loading behavior and degradation of electrically active filter materials, Aerosol. Sei. Technol., 1998, Vol. 28, 419-432.
  • [247] WALSH D. C, STENHOUSE J. I. T., The effects o particle size, charge and composition on the loading characteristics of an electrically active fibrous filter material, J. Aerosol Science, 1997, Vol. 20, No. 2, 307-321.
  • [248] WANG C. S., Electrostatic forces in fibrous filters~-a review, Powder Technology, 2001, Vol. 118, 166-170.
  • [249] WANNER H. U., Effects of Atmospheric Pollution on Human Health, J. Aerosol Science, 1990, Vol. 21, 389-396.
  • [250] WATSON P. K., The Transport and Trapping of Electrons in Polymers, IEEE Transaction on Dielectrics and Electrical Insulation, 1995, Vol. 5, No. 5, 915-924.
  • [251] WEST J. E., SESSLER G. M., Charge distribution in electron-beam irradiated polymers, [w:] 7th Intern. Symp. on Electrets, Berlin, 1991, 371-376.
  • [252] WÜBBENHORST M., HORNSBY J., STACHEN M., DAS-GUPTA D. K., BULINSKI A., BARNJI S., Dielectric Properties and Spatial Distribution of Polarization in Polyethylene Aged under ac Voltage in a Humid Atmosphere, IEEE Transaction on Dielectrics and Electrical Insulation, 1998, Vol. 5, No. 1, 9-15.
  • [253] WUKASCH D. C, COOLEY D. A., BENNETT J. G., GONTIJO B., BONGIORNO F. P., Results of a new Meadox-Cooley double velour dacron graft for arterial reconstruction, J. Cardiovasc. Surg., 1979, No. 20, 249-256.
  • [254] YANG S., LEE G. W. M., Filtration characteristics of a fibrous filter pretreated with anionic surfactants for monodisperse solid aerosols, Aerosol Science, 2005, Vol. 36, 419-437.
  • [255] YANG G. M., SESSLER G. M., Charge distribution in electron-beam irradiated Kapton PI and Teflon FEP films, [w:] 8th Intern, Symp. on Electrets, Paris, 1994, 248-253.
  • [256] YANG G. M., SESSLER , M. G., Radiation-induced conductivity in electron-beam, IEEE Trans. Electr. Insul., 1992, Vol. 27, 843-848.
  • [257] YAO L., DANIEL D., SWARTZ D. D., Fibrin-based tissue-engineered blood vessels: differentiabeffects of biomateriał and culture parameters on mechanical strength and vascular reactivity, Tiss. Eng., 2005, Vol. 11, 991-1003.
  • [258] YLATALO S. I., HAUTANEN J., Electrostatic Precipitator Penetration Function for Pulverized Coal Combustion, Aerosoli Science and Technology, 1998, Vol. 29, 17-30.
  • [259] YOSHITO I., Blood compatible polymers, [w:] Advances In polymer science, pod red. K. Dusek, Springer Verlag, Berlin 1984.
  • [260] YOVCHEVA T. A., AVRAMOVA I. A., MEKISHEV G. A., MARINOVA T. S., Corona-charged polypropylene electrets analyzed by XPS, Journal of Electrostatics, 2007, No. 65, 667-671.
  • [261] ZAHN M., HIKITA M., WRIGHT K. A., COOKE C. M., BRENNAN J., Kerr electro-optic field mapping measurements in electron beam irradiated polymethylmethacrylate, IEEE Trans. Electr. Insul., 1987, Vol. EI-22, No. 2, 181-185.
  • [262] ZBOROMIRSKA-WNUKIEWICZ B„ WNUKIEWICZ J., SOKOŁOWSKI A., SMOLA M., Ocena potencjałów elektrokinetycznych na styku kości, implantu i środowiska zapalnego, Implantoprotetyka, 2002, Vol. 3, No. 4(9), 12-14.
  • [263] ZBOROMIRSKA-WNUKIEWICZ B., SOKOŁOWSKI A., WNUKIEWICZ J., Potencjał elektrokinetyczny tworzyw bioceramicznych powierzchniowo modyfikowanych przy użyciu silanów, Ceramics, 2003, Vol. 79, 137-144.
  • [264] ZIMNOCH L., GŁOWIŃSKI S., JODCZYK K. J., KURASZ S„ ANDRZEJEWSKA A., OSTAPOWICZ J., WITKOWSKI S., Ultrastruktura nowej błony wewnętrznej poliestrowej protezy aorty, Polimery w Med., 1982, Vol. 12, 25-38.
  • [265] ZIMNOCH L., GŁOWIŃSKI S., KURASZ S., JODCZYK K. J., ANDRZEJEWSKA A., OSTAPOWICZ J., WITKOWSKI S., Badania ultrastrukturalne i morfologiczne poliestrowych przeszczepów tętnicy głównej, Pat. Pol., 1985, Vol. 36, 84-97.
  • [266] ZMARZŁY D., Modelowanie elektryzacji strumieniowej, Studia i monografie, z. 179, Politechnika Opolska, Opole 2006.
  • [267] ZUWEI M. A, WEI H. E, THOMAS Y. R. S., Grafting of gelatin on lectrospun poly(caprolactone) nanofibers to improve endothelial cell spreading and proliferation and to control cell orientation, Tiss. Eng., 2005, Vol. 7/8, 1149-1158.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW8-0012-0008
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.