PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigation on the air and water vapour permeability of double-layered weft knitted fabrics

Identyfikatory
Warianty tytułu
PL
Badanie przepuszczalności powietrza i pary wodnej dwuwarstwowych dzianin rządkowych
Języki publikacji
EN
Abstrakty
EN
During the investigation, double-layered weft knitted fabrics for leisure sports were designed with physiological and thermal comfort in mind. Physiological comfort is determined by the state of the organism during physical activity, and thermal comfort is determined by the feeling of warmth/coldness and damp/dryness, which depends on the air permeability and capability to absorb and evaporate sweat. The main goal of this study was to investigate the influence of knitting structure, fibre type, and yarn properties on the air and water vapour permeability of double-layered weft knitted fabrics. An investigation was carried out using fabrics knitted in plain plating and with combined structures on a circular knitting machine. One layer (outer) was made from cotton yarns or man-made bamboo yarns and the other one (inner) was from synthetic fibre yarns (polypropylene, polyester and polyamide). The study established that the fibre composition of yarn and knitting structure parameters, such as the loop length, area linear filling rate and pattern have a significant influence on the air permeability of double-layered weft knitted fabrics. The main influence on the water vapour permeability of double-layered knitted fabrics is the kind of raw material i.e. the wetting and wicking properties of fibres.
PL
Badano dzianiny dwuwarstwowe rządkowe przeznaczone dla sportów rekreacyjnych. Celem badań była analiza wpływu struktury dzianin, typu włókna i właściwości przędzy na przepuszczalność powietrza i pary wodnej dzianin dwuwarstwowych rządkowych. Jedna warstwa wykonana była z bawełny lub włókien bambusowych (otrzymanych z celulozy), podczas gdy druga z przędz z włókien syntetycznych (PP, PET i PA). Stwierdzono, że na przepuszczalność powietrza wpływają długość pętli, współczynnik wypełnienia i rodzaj splotu, podczas gdy na przepuszczalność pary wodnej przede wszystkim rodzaj materiału.
Rocznik
Strony
69--73
Opis fizyczny
Bibliogr. 16 poz., tab., wykr.
Twórcy
autor
  • Lithuania, Kaunas, Kaunas University of Technology, Faculty of Design and Technologies, Department of Textile Technology, asta.bivainyte@stud.ktu.lt
Bibliografia
  • 1. Uçar N., Yilmaz T.; Fibres&Textiles in Eastern Europe, Vol. 12, No. 3(47), 2004, pp. 34-38.
  • 2. Wu H. Y., Zhang W., Li J.; Fibres&Textiles in Eastern Europe, Vol. 15, No. 4(75), 2009, pp. 46-51.
  • 3. Umbach K. H.; Knitting Technique, Vol 15, No. 3, 1993, pp. 165-169.
  • 4. Tugrul Ogulata R., Mavruz S.; Fibres&Textiles in Eastern Europe, Vol. 18, No. 5(82), 2008, pp. 71-75.
  • 5. Mikučionienė D., Čiukas R., Mickevičienė A.; Materials Science (Medziagotyra), Vol. 16, No. 3, 2010, pp. 221-225.
  • 6. Čiukas R., Abramavičiūtė J.; Fibres&Textiles in Eastern Europe, Vol. 18, No.1(78), 2010, pp. 84-88.
  • 7. Petrulytė S., Baltakytė R.; Tekstil, Vol. 57(1-2), 2008, pp. 15-19.
  • 8. Baltakytė R., Petrulytė S.; Materials Science (Medziagotyra), Vol. 14, No. 3,2008, pp. 258-262.
  • 9. Skenderi Z., Čubrić I.S., Srdjak M.; Fibres&Textiles in Eastern Europe, Vol. 17, No. 2(73), 2009, pp. 72–75.
  • 10. Wang F., Zhou X., Wang S.; Fibres&Textiles in Eastern Europe, Vol. 17, No. 2(73), 2009, pp. 46-49.
  • 11. Brazaitis M., Kamandulis S., Skurvydas A., Daniuseviciutė L.; Applied Ergonomics, Vol. 44, No. 2, 2010, pp. 619-624.
  • 12. Wilmore J. H., Costill D. L., Physiology of Sport and Exercise. Human Kinetics, 2004, pp. 307-330.
  • 13. Todd G., Butler J. E., Taylor J. L., Gandevia S. C.; J. Physiology, 2005, pp. 563;621-631.
  • 14. Wilbik-Hałgas B., Danych R., Więcek B., Kowalski K.; Fibres&Textiles in Eastern Europe, Vol. 14, No. 3(57), 2006, pp.77-80.
  • 15. Ermulu N., Ozipek O.; Fibres&Textiles in Eastern Europe, Vol. 16, No. 4(69),2008, pp. 43-47.
  • 16. Gavin T. P.; Sports Med., Vol. 33(13),2003, pp. 941-947.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW7-0027-0033
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.