PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Development of single-filter Doppler signal discrimination method for incoherent Doppler lidar system

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper, we present a single-filter Doppler signal discrimination method for an incoherent Doppler lidar system that has been developed by the Korea Atomic Energy Research Institute. For the incoherent Doppler system, we use an injection-seeded pulsed Nd:YAG laser as a transmitter and an iodine filter as a Doppler frequency discriminator. To reduce the temperature-dependence error, a single iodine filter is used to lock the laser frequency and to detect the Doppler frequency shift. The mean squared error of the frequency locking process is 3.87 MHz, which corresponds to a wind velocity detection limit of approximately 1.04 m/s. The range and velocity measurements are performed using a tunable rotating disc. The results are consistent with those of previous studies in terms of the correlation between the signal ratio (signal/reference) and the actual speed of the rotating disc.
Czasopismo
Rocznik
Strony
545--553
Opis fizyczny
Bibliogr. 12 poz., rys., tab.
Twórcy
autor
autor
autor
autor
autor
autor
  • Laboratory for Quantum Optics, Korea Atomic Energy Research Institute (KAERI), Daedeok-Daero 989-111, Yuseong-Gu, Daejeon 305-353, Korea
Bibliografia
  • [1] MENZIES R.T., Doppler lidar atmospheric wind sensor: A comparative performance evaluation for global measurement application from earth orbit, Applied Optics 25(15), 1986, pp. 2546–2553.
  • [2] REES D., MCDERMID I.S., Doppler lidar atmospheric wind sensor: Reevaluation of a 355-nm incoherent Doppler lidar, Applied Optics 29(28), 1990, pp. 4133–4144.
  • [3] MCGILL M.J., SKINNER W.R., IRGANG T.D., Validation of wind profiles measured with incoherent Doppler lidar, Applied Optics 36(9), 1997, pp. 1928–1932.
  • [4] FRIEDMAN J.S., TEPLEY C.A., CASTLEBERG P.A., ROE H., Middle-atmospheric Doppler lidar using an iodine-vapor edge filter, Optics Letters 22(21), 1997, pp. 1648–1650.
  • [5] MCKAY J.A., Assessment of a multibeam Fizeau wedge interferometer for Doppler wind lidar, Applied Optics 41(9), 2002, pp. 1760–1767.
  • [6] CHIAO-YAO SHE, JIA YUE, ZHAO-AI YAN, HAIR J.W., JIN-JIA GUO, SONG-HUA WU, ZHI-SHEN LIU, Direct--detection Doppler wind measurements with a Cabannes–Mie lidar: A. Comparison between iodine vapor filter and Fabry–Perot interferometer methods, Applied Optics 46(20), 2007, pp. 4434–4443.
  • [7] CHIAO-YAO SHE, JIA YUE, ZHAO-AI YAN, HAIR J.W., JIN-JIA GUO, SONG-HUA WU, ZHI-SHEN LIU, Direct-detection Doppler wind measurements with a Cabannes–Mie lidar: B. Impact of aerosol variation on iodine vapor filter methods, Applied Optics 46(20), 2007, pp. 4444–4454.
  • [8] LIU Z.S., CHEN W.B., ZHANG T.L., HAIR J.W., SHE C.Y., An incoherent Doppler lidar for ground--based atmospheric wind profiling, Applied Physics B 64(5), 1997, pp. 561–566.
  • [9] DUKHYEON KIM, SEONGOK KWON, HYUNGKI CHA, YOUNGGI KIM, JEONGHAEI SUNWOO, A newly designed single etalon double edge Doppler wind lidar receiving optical system, Review of Scientific Instruments 79(12), 2008, article 123111.
  • [10] SHIBATA Y., NAGASAWA C., ABO M., NAGAI T., Low-altitude wind measurement using incoherent Doppler lidar by utilizing both absorption slopes of the iodine absorption spectrum, Japanese Journal of Applied Physics 48, 2009, article 126501.
  • [11] SHIBATA Y., NAGASAWA C., ABO M., NAGAI T., System evaluation of an incoherent wind Doppler LIDAR using an iodine filter, Japanese Journal of Applied Physics 48, 2009, article 032401.
  • [12] ZHI-SHEN LIU, BING-YI LIU, SONG-HUA WU, ZHI-GANG LI, ZHANG-JUN WANG, High spatial and temporal resolution mobile incoherent Doppler lidar for sea surface wind measurements, Optics Letters 33(13), 2008, pp. 1485–1487.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW7-0027-0010
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.