The infrared transmittance model for in-situ monitoring of diamond on quartz deposition process

• Autorzy: Kulesza S.
• Języki publikacji: EN

Abstrakty

EN

A model of the optical transmittance of a diamond/quartz/vacuum system in the infrared range is presented in the paper. The model relies on the attenuation of unpolarized light emitted by the substrate, the intensity of which is subsequently measured by the pyrometer at two close wavelengths. Changes in the film thickness give rise to the phase shift between the waves, which in turn influences the apparent temperature measured by the pyrometer. Periodic variation of the apparent temperature is therefore modeled in order to extract the changes in the film thickness and surface roughness. Another question discussed within the frame of the model is the true temperature estimation in the case of samples with the roughest surfaces.

Słowa kluczowe

EN

infrared transmittance; pyrometry; surface properties

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Optica Applicata
• Rocznik: 2012
• Tom: Vol. 42, nr 3
• Strony: 533--543
• Opis fizyczny: Bibliogr. 35 poz., rys.

Twórcy

autor

Kulesza S.

• Wydział Matematyki i Informatyki, Uniwersytet Warmińsko-Mazurski, Żołnierska 14, 10-561 Olsztyn, Poland,

Bibliografia

• [1] MORTET V., KROMKA A., KRAVETS R., ROSA J., VORLICEK V., ZEMEK J., VANECEK M., Investigation of diamond growth at high pressure by microwave plasma chemical vapour deposition, Diamond and Related Materials 13(4–8), 2004, pp. 604–609.
• [2] SPRINGTHORPE A.J., HUMPHREYS T.P., MAJEED A., MOORE W.T., In situ growth rate measurements during molecular beam epitaxy using an optical pyrometer, Applied Physics Letters 55(20), 1989, pp. 2138–2140.
• [3] CATLEDGE S.A., COMER W., VOHRA Y.K., In situ diagnostics of film thickness and surface roughness of diamond films on a Ti–6Al–4V alloy by optical pyrometry, Applied Physics Letters 73(2), 1998, pp. 181–183.
• [4] AKKERMAN Z.L., SONG Y., YIN Z., SMITH F.W., GAT R., In situ determination of the surface roughness of diamond films using optical pyrometry, Applied Physics Letters 72(8), 1998, pp. 903–905.
• [5] SNAIL K.A., MARKS CH.M., In situ diamond growth rate measurement using emission interferometry, Applied Physics Letters 60(25), 1992, pp. 3135–3137.
• [6] BENEDIC F., BRUNO P., PIGEAT PH., Real-time optical monitoring of thin film growth by in situ pyrometry through multiple layers and effective media approximation modeling, Applied Physics Letters 90(13), 2007, article 134104.
• [7] CLEMENT R.E., LWIR spectral properties of CVD diamond at cryogenic temperatures, Diamond and Related Materials 6(1), 1997, pp. 169–171.
• [8] BORN M., WOLF E., Principles of Optics, 6th Edition, Pergamon Press, Oxford, 1980, pp. 38–53.
• [9] BECKMANN P., SPIZZICHINO A., The Scattering of Electromagnetic Waves from Rough Surfaces, Pergamon, New York, 1963, pp. 17–33
• [10] VORLICEK Y., ROSA J., VANECEK M., NESLADEK M., STALS L.M., Quantitative study of Raman scattering and defect optical absorption in CVD diamond films, Diamond and Related Materials 6(5–7), 1997, pp. 704–707.
• [11] YANG W.B., LÜ F.X., CAO Z.X., Growth of nanocrystalline diamond protective coatings on quartz glass, Journal of Applied Physics 91(12), 2002, pp. 10068–10073.
• [12] NODA M., MARUI A., SUZUKI T., UMENO M., Deposition of diamond film on silicon and quartz substrates located near DC plasma, Diamond and Related Materials 14(11–12), 2005, pp. 1757–1760.