Fatigue strength testing of LTCC and alumina ceramics bonds

• Autorzy: Dąbrowski A. , Matkowski P. , Golonka L.
• Języki publikacji: EN

Abstrakty

EN

In this paper the results of fatigue strength tests of ceramic joints are presented. These tests have been performed on the samples subjected to thermal and vibration fatigue as well as on the reference samples without any additional loads. The main goal of the investigation was to determine the strength of hybrid ceramics joints using tensile testing machine. The experiment enabled evaluation of fatigue effects in the mentioned joints. Geometry of test samples has been designed according to FEM simulations, performed in ANSYS FEM environment. Thermal stress as well as the stress induced by vibrations have been analyzed in the designed model. In the experiments two types of ceramics have been used - LTCC green tape DP951 (DuPont) and alumina ceramic tape. The samples have been prepared by joining two sintered ceramic beams made of different types of material. The bonds have been realized utilizing low temperature glass or a layer of LTCC green tape.

Słowa kluczowe

EN

ceramic bonds; reliability testing; LTCC; alumina

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2012
• Tom: Vol. 30, No. 4
• Strony: 329--334
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Dąbrowski A.

autor

Matkowski P.

autor

Golonka L.

• Wrocław University of Technology, Faculty of Microsystem Electronics and Photonics, Wybrzeze Wyspia ˙ nskiego 27, 50-370 Wrocław, Poland

Bibliografia

• [1] ZARNIK M. S., BELAVICˇ D., MACEK ˇ S., HOLC J., Int. J. Appl. Ceram. Tec., Vol. 6, Iss. 1, (2009), 9.
• [2] RADOSAVLJEVIC´ G., SMETANA W., MARIC´ A.,Zˇ IVANOV LJ., UNGER M., STOJANOVIC´ G., Proc. 27th International Conference on Microelectronics (MIEL 2010), NIS, Serbia, 16–19 May, 2010.
• [3] BIROL, H., MAEDER, T., NADZEYKA, I., BOERS, M.,RYSER, P., Sens. Actuat. A: Phys., 2007, 134, 334–338.
• [4] MALECHA K., PIJANOWSKA D., GOLONKA L., TORBICZ W., Sens. and Actuat. B: Chem., 2009, 141, 301–308.
• [5] BERMEJO, R., SUPANCIC, P., KRALEVA, I., MORRELL, R., DANZER, R., J. Eur. Ceram. Soc., 2011, 31, (5), 745–753.
• [6] JOHANNESSEN R., OLDERVOLL F., STRISLAND F., Microelectron. Reliab., 2008, 48, 1711–1719.
• [7] HARSANYI G., Microelectron. Reliab., 2000, 40, 339–345.
• [8] DuPont 951 Green Tape™ datasheet.
• [9] Kyocera Electronic Fine Ceramic datasheet.
• [10] MIL-STD-883H Test Method Standard.