PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Comparative analysis of power control schemes in dfig for wind energy generation

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Analiza porównawcza metod stosowanych do regulacji mocy czynnej i biernej w dwustronnie zasilanym generatorze indukcyjnym
Języki publikacji
EN
Abstrakty
EN
This paper describes two algorithms applied for active and reactive power control in wind turbine driven doubly fed induction generator (DFIG). The first proposed method applies the PI controllers for regulation of DFIG power and the rotor current while the second one utilizes a difference approximation of a given flux derivative. Both algorithms are based on the model description with reference to the stator flux linkage frame. General description of the analyzed methods is delivered and some results of simulations are included.
PL
W artykule przedstawiona jest analiza dwóch algorytmów stosowanych do regulacji mocy czynnej i biernej w elektrowniach wiatrowych z dwustronnie zasilanymi generatorami indukcyjnymi. W pierwszej rozważanej metodzie stosowane są regulatory PI do kontroli mocy i prądu wirnika, podczas gdy w drugiej - całkowanie ciągłe jest aproksymowane za pomocą zależności przyrostowych. W obu algorytmach model maszyny jest zapisany względem układu współrzędnych związanych ze strumieniem stojana. Zamieszczony jest opis rozważanych modeli oraz wyniki przeprowadzonych symulacyjnych testów.
Rocznik
Tom
Strony
75--88
Opis fizyczny
Bibliogr. 9 poz., rys. 10
Twórcy
autor
  • Instytut Elektrioenergetyki Politechniki Wrocławskiej, Wyb. Wyspiańskiego 27, 50-370 Wrocław
Bibliografia
  • [1] DOMMEL H., Electro-Magnetic Transients Program, BPA, Portland, Oregon, 1986.
  • [2] MALINOWSKI M., JASIŃSKI M., KAŹMIERKOWSKI M.P., Simple direct power control of three-phase PWM rectifier using space-vector modulation (DPC-SVM), IEEE Trans. Ind. Electron., Vol. 51, No. 4, Apr. 2004, pp. 447-454.
  • [3] MATHWORKS, Simulink 7.2. Available in: http://www.mathworks.com/products/simulink/
  • [4] PENA R., CLARE J.C., ASHER G.M., Double fed induction generator using back-to-back PWM converter and its application to variable-speed wind-energy generation, IEE Proc.-Electr. Power Appl.,Vol. 143, No. 3, 1996, pp. 231-241.
  • [5] TAPIA A., TAPIA G., OSTOLAZA J.X., SAENZ J.R., Modeling and Control of a Wind Turbine Driven Doubly Fed Induction Generator, IEEE Trans. Energy Convers., Vol. 18, No. 2, June 2003, pp. 194-204.
  • [6] TAPIA G., SANTAMARIA G., TELLERIA ML, SUSPERREGUI A., Methodology for Smooth Connection of Doubly Fed Induction Generators to the Grid, IEEE Trans. Energy Convers., Vol. 24, No. 4, December 2009, pp. 959-971.
  • [7] VAS P., Sensorless Vector and Direct Torque Control, Oxford University Press, Oxford, U.K., 1998.
  • [8] XU L., CARTWRIGHT P., Direct active and reactive power control of DFIG for wind energy generation, IEEE Trans. Energy Convers., Vol. 21, No. 3, September 2006, pp. 750-758.
  • [9] ZHI D., XU L., Direct power control of DFIG with constant switching frequency and improved transient performance, IEEE Trans. Energy Convers., Vol. 22, No. 1, March 2007, pp. 110 118.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW7-0025-0002
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.