PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Textile Composite Materials with Bioactive Melt-Blown Nonwovens for Protective Footwear

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Bioaktywne włókniny melt-blown w kompozytach stosowanych w obuwiu ochronnym
Języki publikacji
PL
Abstrakty
PL
W artykule zaprezentowano wyniki badań modelowania kompozytów tekstylnych przeznaczonych do stosowania jako wkłady w szczelnym obuwiu ochronnym. Ze względu na specyficzne warunki stosowania wkładów założono, że powinny one mieć podwyższone właściwości higieniczne oraz bioaktywne w odniesieniu do bakterii i grzybów, a jednocześnie być odporne na działanie czynników mechanicznych. Do konstrukcji kompozytów opracowano warianty bioaktywnych włóknin melt-blown na bazie polipropylenu (PP), poliwęglanu (PC) i poliamidu (PA). Opracowano także technikę łączenia warstw kompozytu z wykorzystaniem ultradźwięków. Przeprowadzona seria badań laboratoryjnych wykazała, że optymalne właściwości z punktu widzenia zastosowania wkładów w całogumowym obuwiu ochronnym, wykazały bioaktywne kompozyty na bazie włókniny melt-blown z PC. Charakteryzowały się one bardzo dobrymi właściwościami mechanicznymi, higienicznymi oraz mikrobiologicznymi (testy wobec bakteriom i grzybom).
EN
This paper presents the results of a study into textile composite materials designed to be used for the manufacture of insoles for permeation-resistant protective footwear (all-rubber). Due to the special conditions in which the insoles are to be used, it was assumed that they should have heightened hygienic and bioactive properties with respect to bacteria and fungi, and they should also be resistant to mechanical stress. Several variants of melt-blown nonwovens were engineered on the basis of polypropylene (PP), polycarbonate (PC), and polyamide (PA) to be used in composite materials. Also a method was developed for ultrasound bonding of composite layers. A series of laboratory experiments showed bioactive composite materials based on PC melt-blown nonwovens to have optimum properties from the point of view of the application of insoles in rubber footwear. The composites are characterised by very good mechanical properties (resistance to abrasion, tearing and bond strength), hygienic properties (pH of aqueous extracts, water vapour permeability, water vapour coefficient, water absorption and desorption, thermal resistance), and microbiological properties (tests for the following bacteria: Escherichia coli and Streptococcus aureus and fungi: Candida albicans, Aspergillus fumigatus, and Trichophyton mentagrophytes).
Rocznik
Strony
119--125
Opis fizyczny
Bibliogr. 31 poz.
Twórcy
autor
  • Poland, Łódź, Central Institute for Labour Protection - National Research Institute
Bibliografia
  • 1. Information on Achilles and Hermes programs are available at http://zdrowie.med.pl/grzybica/grzybica4.html.
  • 2. Bell-Syer SEM, Hart R, Crawford F. et al.Oral treatments for fungal infections of the skin of the foot (Cochrane Review).The Cochrane Library, Issue 2, John Wiley & Sons, Ltd., 2002.
  • 3. Majchrzycka K, Pościk A. Selection of means of individual protection. Wydawnictwo CIOP-PIB, 2007.
  • 4. Kuklane K., Protection of Feet in Cold Exposure, Industrial Health, 2009; 47:214-225.
  • 5. Kuklane K. The Use of Footwear Insulation Values Measured on a Thermal Foot Model, JOSE 2004; 10, 1.
  • 6. Koradecka D. (ed.), Labor science –safety, hygiene, ergonomics: Physiological factors 4 (in Polish), Wydawnictwo CIOP, Warsaw, 2000.
  • 7. Irzmańska E., Microclimate in protective footwear (in Polish), Przegląd Włókienniczy WOS, 2011; 2: 35-38.
  • 8. Gajewski R., Foot requirements from the perspective of physiology (in Polish), 6thNational Scientific Symposium, CLPO,Cracow 1997.
  • 9. Havenith G. et al., Final technical report.THERMPROTECT, Assessment of Thermal Properties of Protective Clothing and Their Use. EU-project, 2006,contract G6RD-CT-2002-00846.
  • 10. Irzmańska E, Research Grant No NN404 068240 (contract number 0682/B/P01/2011/40) financed by the National Science Centre in the years 2011–2013.
  • 11. Falkiewicz-Dulik M, Sadowski T, Hygienic properties of shoe inserts for special footwear (in Polish) in: Footwear– research and innovative manufacture technologies (in Polish), Tadeusz Sadowski(ed.), ISBN 978-83-932150-0-3,Cracow 2010.
  • 12. Janusz I, Szubert U, Sysa-Jędrzejewska A, Zalewska A. Localization of fungal infections in the Outpatient Dermatological Department in Łódź, Mikologia Lekarska 2005; 12 (3): 183-188.
  • 13. Szepietowski J, Reich A, Woźniak M, Baran E. Evaluation of quality of life in patients with onychomycosis using the Polish version of Dermatology Life Quality Index, Mikologia Lekarska 2006; 13(3): 193-198.
  • 14. Szepietowski J, Reich A, Gartłowska E,Kulig M, Baran E. Factors influencing coexistence of toenail onychomycosis with tinea pedis and other dermatomycoses, Mikologia Lekarska, 2006, Suplement 1/06, [S1] 31
  • 15. Kamińska-Winciorek G, Brzezińska-Wcisło L, The role hyperhidrosis and using powder dusts in tinea pedis etiopathogenesis,Mikologia Lekarska.2007; 14(2), 105-109.
  • 16. Falkiewicz-Dulik M, Drobnoustroje zasiedlające obuwie oraz ochrona materiałów obuwniczych w aspekcie zdrowotności i biodeterioracji [Microorganisms colonizing footwear and the protection of footwear materials in respect of health and biodeterioration],3rd Scientific Conference “Microbiological Decomposition and Corrosion of Technological Materials,” Łódź, 2003,296-305.
  • 17. Falkiewicz-Dulik M., Właściwości mikrobiologiczne materiałów obuwniczych, a trwałość i higiena obuwia [Influence of microbiological properties of footwear materials on footwear durability and hygiene],7th International Scientific Conference: Innovative and Ecological Materials and Technologies for the Footwear Industry and Other Sectors of the Light Industry, CLPO, Cracow, 2004, 86-96.
  • 18. Falkiewicz-Dulik M, Macura AB. Footwear hygiene in foot mycosis prophylaxis (in Polish), Mikologia Lekarska,2006;13(4): 265-271, ISSN 1232-986X.
  • 19. Falkiewicz-Dulik M, Przyjemska L, Comfortable insoles (in Polish), Przegląd Skórzany 1997; 12: 487-489.
  • 20. Falkiewicz-Dulik M. Hygienic textile composites for footwear uppers (in Polish), Przegląd WOS, 2009; 5: 44-48.
  • 21. Gulbiniene A., Jankauskaite V., Kondratas A.; Investigation of the Water Vapour Transfer Properties of Textile Laminates for Footwear Linings, Fibres & Textiles in Eastern Europe 2011; 19, No. 3 (86):78-81.
  • 22. Connor DJ. Insoles liners and footwear incorporating loofah material, Patent 5930916, 1999.
  • 23. Dean N. Shoe insoles with flexible inserts,Patent 20110162234, 2011.
  • 24. Basford JR, Smith MA. Shoe insoles in the workplace, Department of Physical Medicine and Rehabilitation, Mayo Clinic and Foundation, Rochester, Minnesota, 2010.
  • 25. Barton JG, Lees A. Comparison of shoe insole materials by neural network analysis, Medical and Biological Engineering and Computing, 1996, 34(6), 453-9.
  • 26. Irzmańska E., Kujawa J., Kowalski J.,Pawlicki L., Irzmański R.; Heat and humidity transmission as a determinant of comfort and ergonomics in evaluating bed sheets for long-term immobilised patients, Ergonomia: An International Journal of Ergonomics and Human Factors,2009; 31 (1-2): 39-54.
  • 27. Irzmańska E, Lipp-Symonowicz B, Kujawa J, Irzmański R. Textiles preventing skin damages, Fibres & Textiles In Eastern Europe, 2010; 18, 2 (79) 84–90.
  • 28. Brochocka A, Majchrzycka K. Technology for the Production of Bioactive Meltblown Filtration Materials Applied to Respiratory Protective Devices; Fibres & Textiles in Eastern Europe 2009; 17,5(76): 92-98.
  • 29. Patent claim, Manufacture technology for electret melt-blown nonwovens and a device for the manufacture of electret melt-blown nonwovens; 193362 –27.06.2006.
  • 30. Patent claim, Electret melt-blown nonwovens, 388072 – 19.05.2009.
  • 31. Urbańczyk GW. Science of fibre, Publishing and Scientific - Technical, Warsaw 1985.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW7-0024-0026
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.