Molten salt synthesis of potassium hexatitanate

• Autorzy: Zaremba T.
• Języki publikacji: EN

Abstrakty

EN

Potassium hexatitanate fibrous crystals have been synthesized by a conventional solid-state reaction and via molten salt process. The molten salt process has been shown to be effective in preparing fine and non-agglomerated K2Ti6O13 whiskers. The type of molten salt (KCl, NaCl-KCl) has a significant effect on the chemical composition of the whiskers. By using a eutectic mixture of NaCl and KCl, the replacement of potassium ions in solid potassium hexatitanate by smaller sodium ions from the chloride fiux can be achieved. The characterization of the samples was carried out by means of XRD, SEM, EDX and WDX.

Słowa kluczowe

EN

potassium hexatitanate; synthesis; conventional calcinations; molten salt process; whiskers

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2012
• Tom: Vol. 30, No. 3
• Strony: 180--188
• Opis fizyczny: Bibliogr. 32 poz.

Twórcy

autor

Zaremba T.

• Department of Chemistry, Inorganic Technology and Fuels, Faculty of Chemistry of Silesian University of Technology, B. Krzywoustego St. 6, 44-100 Gliwice, Poland

Bibliografia

• [1] LIU C., LU X., YU G., FENG X., ZHANG Q., XU Z.,Mater. Chem. Phys., 94 (2005), 401.
• [2] KANG S.O., JANG H.S., KIM Y.I., KIM K.B., JUNGM.J., Mater. Lett., 61 (2007), 473.
• [3] WANG B., SHI Y., XUE D., J. Solid State Chem., 180(2007), 1028.
• [4] LIU Y., QI T., ZHANG Y., Mater. Res. Bull., 42 (2007),40.
• [5] SANCHEZ ´ -MONJARAS´ T., GOROKHOVSKY A.,SCALANTE-GARC´IA J.I., J. Amer. Ceram. Soc., 91(2008), 3058.
• [6] LIU C., YIN H., LIU Y., REN M., WANG A., GE C.,YAO H., FENG H., CHEN J., JIANG T., Mat. Res. Bull.,44 (2009), 1173.
• [7] ZHANG X., TANG S., ZHAI L., YU J., SHI Y., DU Y.,Mater. Lett., 63 (2009), 887.
• [8] YAHYA R.B., HAYASHI H., NAGASE T., EBINA T.,ONODERA Y., SAITOH N., Chem. Mater., 13 (2001),842.
• [9] XIE J., LU X., ZHU Y., LIU C., BAO N., FENG X.,J. Mater. Sci., 38 (2003), 3641.
• [10] BAO N., FENG X., LU X., YANG Z., J. Mater. Sci., 37(2002), 3035.
• [11] ZAREMBA T., WITKOWSKA D., Mater. Sci. – Poland,28 (2010), 25.
• [12] LEE J.K., LEE K.H., KIM H., J. Mater. Sci., 31 (1996),5493.
• [13] WANG B.L., CHEN Q., WANG R.H., PENG L.M.,Chem. Phys. Lett., 376 (2003), 726.188 T. ZAREMBA
• [14] HAKUTA Y., HAYASHI H., ARAI K., J. Mater. Sci., 39(2004), 4977.
• [15] WANG B.L., CHEN Q., HU J., LI H., HU Y.F., PENGL.M., Chem. Phys. Lett., 406 (2005), 95.
• [16] MENG X., WANG D., LIU J., LIN B., FU Z., Solid StateCommun., 137 (2006), 146.
• [17] WANG J., LI C., LIANG B., WANG X., Rare Metals, 28(2009), 24.
• [18] HE M., FENG X., LU X., JI X., LIU C., BAO N., XIE J.,J. Mater. Sci., 39 (2004), 3745.
• [19] CHOY J.H., HAN Y.S., Mater. Lett., 34 (1998), 111.
• [20] LI G.L., WANG G.H., HONG J.M., J. Mater. Sci. Lett.,18 (1999), 1865.
• [21] LI G.L., WANG G.H., HONG J.M., Mater. Res. Bull.,34 (1999), 2341.
• [22] AFANASIEV P., J. Mater. Sci., 41 (2006), 1187.
• [23] GOROKHOVSKY A.V., ESCALANTE-GARC´IA J.I.,SANCHEZ ´ -MONJARAS´ T., GUTIERREZ ´ -CHAVARR´IAC.A., J. Eur. Ceram. Soc., 24 (2004), 3541.
• [24] KIMURA T., YAMAGUCHI T., Morphology Control of Electronic Ceramic Powders by Molten Salt Synthesis,in: K.S. Mazdiyashi, J.W. Mc Cauley and R.A. Haber (Eds.), Advances in Ceramics – Ceramic Powder Science,The American Ceramic Society, Inc., Westerville, 1987,p. 169.
• [25] YOON K.H., CHO Y.S., KANG D.H., J. Mater. Sci., 33 (1998), 2977.
• [26] ZHABREV V.A., EFIMENKO L.P., BARYSHNIKOV V.G.,POLYAKOVA I.G., GUMENNIKOV A.V., Glass Phys.Chem., 34 (2008), 91.
• [27] SETASUWON P., KIJAMNAJSUK S., SONGKLANAKARIN J., Sci. Technol., 30(2008), 787.
• [28] CAI Z., XING X., LI L., XU Y., J. Alloys. Compd., 454(2008), 466.
• [29] BORTOLANI F., DOREY R.A., J. Eur. Ceram. Soc., 30(2010), 2073.
• [30] VOORHEES P.W., Annu. Rev. Mater. Sci., 22 (1992), 197.
• [31] KONSZTOWICZ K., Fibre Reinforced Composite Materials, AGH Publ., Krakow, 1986 (in Polish). ´
• [32] ZENG J.T., KWOK K.W., CHAN H.L.W., Mater. Letters, 61 (2007), 409.