Characteristics of GTA fusion zones and heat affected zones in superalloy 713C

• Autorzy: Lachowicz M. B. , Dudziński W.
• Języki publikacji: EN

Abstrakty

EN

In this paper, metallographic examinations, characterising microstructural changes in the 713C superalloy subjected to remelting by GTA method, are presented. In the fusion zone, precipitation of M23C6 or M6C carbides based on chromium and molybdenum was observed. Eutectic mixtures of (?-gg?)-M x C y type with highly developed morphology were also perceived. It was found that, in the matrix areas with non-homogeneous chemical composition, the eutectic reaction ?-?? can occur at the temperature close to that of the precipitation of the M x C y carbides. The presence of silicon in the carbide phases can be conducive to lowering their solidification point by creating low-melting compound NbSi. Both in the fusion zone (FZ) and in the heat-affected zone (HAZ), the secondary precipitates of the Ni3(AlTi)-?? phase, varying in size from 50 to 100 nm, were found. The lattice mismatch factor of the ? and ?? particles was +0.48 % to +0.71 %, which is characteristic of the coherent precipitates of the Ni3Al phase enriched with titanium. No dislocations or stacking faults were observed in the microstructure of the FZ. In the HAZ, some primary undissolved precipitates, with a part of aluminium probably replaced with niobium were observed, which raised their melting point.

Słowa kluczowe

EN

713C alloy; heat-affected zone; Ni3Al; hot crack; lattice mismatch factor

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2012
• Tom: Vol. 30, No. 3
• Strony: 159--169
• Opis fizyczny: Bibliogr. 39 poz.

Twórcy

autor

Lachowicz M. B.

autor

Dudziński W.

• Wroclaw University of Technology, Institute of Materials Science and Applied Mechanics, Wroclaw, Poland

Bibliografia

• [1] HENDERSON M.B., ARRELL D., HEOBEL M., LARSSON R., MARCHANT G., Nickel-Based Superalloy Welding Practices for Industrial Gas Turbine Applications, www.msm.cam.ac.uk/phase-trans/2002/ papers/APNickelWeldv2.
• [2] RAMIREZ A.J., LIPPOLD J.C., Mat. Sci. Eng. A, 380 (2004), 245.
• [3] RAMIREZ A.J., LIPPOLD J.C., Mat. Sci. Eng. A, 380 (2004), 259.
• [4] QIAN M., LIPPOLD J.C., Acta Mater., 51 (2003), 3351.
• [5] HARO S., RAMIREZ C., MENDOZA E., RODRIGUEZ R., COLAS R., Mater. Charact., 51 (2003), 22.
• [6] PODREZ-RADZISZEWSKA M., Jożwik P., ´ Arch. Civil Mech. Eng., 4 (2011), vol. 11, 1011.
• [7] EZUGWU E.O., WANG Z.M., MACHADO A.R., Mater.Process Tech., 86 (1999), 1.
• [8] YANG F.M., SUN X.F., ZHANG W., KANG Y.P., GUANH.R., HU Z.Q., Mater. Letters, 49 (2001), 160.
• [9] ASM Handbooks On-line http.//products.asminternational.org/hbk/index.jsp.
• [10] YIN F.S., SUN X.F., LI J.G., GUAN H.R., HU Z.Q.,Scripta Mater., 48 (2003), 425.
• [11] BERTHOLD P., ARAND L., VEBERT C., MICHON S.,Computer Coupling of Phase Diagrams and Thermochemistry, 28 (2004), 159.
• [12] PHADESHIA H.K.D.H., Nickel Based Superalloy, www.msm.cam.ac.uk/phase-trans/2003/superalloys/superalloys.html.
• [13] SUN W.R., LEE J.H., SEO S.M., CHEO S.J., HU Z.Q.,Mat. Sci. Eng. A, 271 (1999), 143.
• [14] CHEN J., LEE J.H., JO C.Y., CHEO S.J., LEE Y.T., Mat.Sci. Eng. A, 247 (1998), 113.
• [15] JIANG W.H., YAO X.D., GUAN H.R., HU Z.Q., Metall.Mater. Trans., 30A (1999), 513.
• [16] LACHOWICZ M., DUDZINSKI ´ W., Archiv. Metall. Mater.,1 vol. 55 (2010), 305–315.
• [17] CHEN W., CHATURVEDI M.C., RICHARDS N.L, MCMAHONG., Metall. Mater. Trans., 29A (1998), 1947.
• [18] QIAN M., LIPPOLD J.C., Weld J., 6 (2003), 145.
• [19] CHEN W., CHATURVEDI M.C., RICHARDS N.L.,Metall. Mater. Trans., 32A (2001), 931.
• [20] HUAXIN L., JONES R.H., Mat. Sci. Eng. A, 192/193(1995), 563.
• [21] HUAXIN L., CHAKI T.K., Mat. Sci. Eng. A, 192/193(1995), 570.
• [22] OJO O.A., RICHARDS N.L., CHATURVEDI M.C.,Scripta Mater., 51 (2004), 683.
• [23] OJO O.A., CHATURVEDI M.C., Mat. Sci. Eng. A, 403(2005), 77.
• [24] OJO O.A., RICHARDS N.L., CHATURVEDI M.C.,Scripta Mater., 50 (2004), 641.
• [25] OJO O.A., RICHARDS N.L., CHATURVEDI M.C.,Scripta Mater., 51 (2004), 683.
• [26] LACHOWICZ M., DUDZINSKI ´ W., HAIMANN K.,PODREZ-RADZISZEWSKA M., Mat. Sci. Eng. A, 479(2008), 269.
• [27] LACHOWICZ M., DUDZINSKI ´ W., PODREZ-RADZISZEWSKA M., Mater. Charact., 59 (2008), 560.
• [28] LACHOWICZ M., ZEMAN M., Przeglad Spawalnictwa,8 (2007), 22.
• [29] DEEVI S.C., SIKKA V.K., Intermetallics, 4 (1996), 357.
• [30] DEEVI S.C., SIKKA V.K., LIU C.T., Prog. Mater. Sci.,42 (1997), 177.
• [31] LIU C.T., STRINGER J., MUNDY J.N., HORTON L.L.,ANGELINI P., Intermetallics, 5 (1997), 579.
• [32] PEARSON W.B., A handbook of lattice spacings andstructures of metals and alloys, vol. 2, Pergamon Press,(1967), 79.
• [33] MUKHERJI D., GILLES R., BARBIER B., GENOVESE D.DEL, HASSE B., STRUNZ P., WROBLEWSKI ´ T., FUESSH., ROSLER ¨ J., Scripta Mater., 48 (2003), 333.
• [34] MAEBASHI T., DOI M., Mat. Sci. Eng. A, 373 (2004),372.
• [35] HANSEN M., Constitution of binary alloys, McGraw-Hill Book Company INC; (1958), 118.Characteristics of GTA fusion zones and heat affected zones in superalloy 713C 169
• [36] CZYRSKA-FILEMONOWICZ A., The influence of helium on the structure of nickel-base alloys. Papers of commission of metallurgy and foundry, Polish Academy of Sciences (1989), 32.
• [37] LOOMIS W.T, FREEMAN J.W, SPONSELLER D.L., Met.Trans., 3 (1972), 989.
• [38] LACHOWICZ M., Archiv. Found Eng., 3, vol. 10, (2010),11.
• [39] SOMOZA A., SANTOS G., GES A., VERSACI R.,PLAZAOLA F., Phys. Stat. Sol., 174 (1999), 189.