Influence of Embroidery Threads on the Accuracy of Embroidery Pattern Dimensions

• Autorzy: Juciene M. , Radaviciene S.

Warianty tytułu

PL

Wpływ nitek stosowanych do haftowania na wymiary haftowanego wzoru

• Języki publikacji: EN

Abstrakty

EN

In the production of garments, embroidery carries out decorative, informative, data transfer and other functions. The features of textiles, stitch density, filling type, area and other factors have a direct influence on embroidery quality. The objective of the paper was to investigate the influence of embroidery threads on the accuracy of embroidery pattern dimensions. For the investigations, embroidery threads with a different linear density, fibre composition, structure, and purpose were selected. Test samples were embroidered by two different filling types, with an embroidery width of 7, 6, 4, 3 and 2 mm, in warp and weft directions and in the bias direction. In all the cases analysed, the width and area of the embroidery pattern was established to decrease the width and area of the digital design. The greatest elongation values were observed during the embroidery process in the bias direction of the fabric.

PL

Haftowanie odgrywa rolę dekoracyjną, informacyjną oraz przenoszenia danych. Parametry takie jak gęstość ściegu i typ wypełnienia odgrywają znaczącą rolę dla realizowanego haftu. Badano wpływ nitek do haftowania na dokładność wymiarów haftowanego wzoru. Do badań wybrano nitki o różnej masie liniowej, surowcu i strukturze. Próbki haftowano dwoma różnymi sposobami wypełnienia, z szerokością haftowania 7, 6, 4, 3 i 2 mm w kierunki osnowy, wątku oraz skośnym. Za każdym razem określano szerokość i powierzchnię haftowanego wzoru w celu porównania występujących zniekształceń. Największe wartości wydłużeń podczas haftowania zostały zaobserwowane w kierunku skośnym do przebiegu nitek.

Słowa kluczowe

EN

embroidery threads; embroidery process; embroidery pattern; textile

PL

nici do haftowania; proces haftowania; wzór haftu; włókiennictwo

• Wydawca: Sieć Badawcza Łukasiewicz - Łódzki Instytut Technologiczny
• Czasopismo: Fibres & Textiles in Eastern Europe
• Rocznik: 2012
• Tom: Vol. 20, no. 3 (92)
• Strony: 92--97
• Opis fizyczny: Bibliogr. 26 poz., rys., tab., wykr.

Twórcy

autor

Juciene M.

• Kaunas University of Technology, Faculty of Design and Technologies, Department of Clothing and Polymeric Products Technology, Studentų g. 56, LT – 51424, Kaunas, Lithuania

autor

Radaviciene S.

Bibliografia

• 1. Bačkauskaitė D, Daukantienė V. Tensional Behaviour of Seamed Lining Fabrics.Book of Proceeding of the 4th International Textile. In: Clothing & Design Conference, October 05th to 08th 2008, Dubrovnik, Croatija, pp. 519 – 523.
• 2. Malčiauskienė E, Milašius A, Laureckienė G, Milašius R. Influence of Weave into Slippage of Yarns in Woven Fabric. Materials Science (Medžiagotyra 2011; 17, 1: 47 – 51.
• 3. Bačkauskaitė D, Daukantienė V. Investigation of Wear Behaviour of Sewn Assemblies of Viscose Linings with Different Treatment. Materials Science (Medžiagotyra). 2011; 17, 2: 155 – 159.
• 4. Malčiauskienė E, Milašius A, Milašius R. Weave Factor for Seam Slippage Prediction of Unbalance Fabrics. Fibers & Textiles in Eastern Europe 2011; 19, 4(87): 101 – 104.
• 5. Frontczak-Wasiak I, Snycerski M, Cybulska M. Influence of Woven Fabric’s Weave on Thread Slippage. Fibers & Textiles in Eastern Europe. 2002; 10, 3(38): 43 – 46.
• 6. Bekampienė P, Domskienė J. Influence of Stitching Pattern on Deformation Behaviour of Woven Fabric during Forming. Material Science (Medžiagotyra) 2010; 6, 3: 226 – 230.
• 7. Warrior NA, Rudd CD, Gardner SP. Experimental Studies of Embroidery for the Local Reinforcement of Composites Structures: 1. Stress Concentrations. Composites: Science and Technology 1999; 59, 14: 2125 – 2137.
• 8. Dobilaitė V, Jucienė M. The Influence of Mechanical properties of Sewing Threads on Seam pucker. International Journal of Clothing Science and Technology 2006; 18, 5: 335 – 345.
• 9. Dobilaitė V, Petrauskas A. The Method of Seam Pucker Evaluation. Material Science (Medžiagotyra) 2002; 9, 1: 209 – 212.
• 10. Rudolf A, Geršak J, Ujhelyiova A, Sfiligoj Smole M. Study of PES Sewing Thread Properties. Fibers and Polymers 2007; 8, 2: 212 – 217.
• 11. Midha VK, Kothari VK, Chatopadhyay R, Mukhopadhyay A. Effect of high-speed sewing on the tensile properties of sewing threads at different stages of sewing. International Journal of Clothing Science and Technology 2009; 21, 4: 217 – 238.
• 12. Geršak J. Rheological Properties of Threads – Their Influence on Dinamic Loads in the Sewing Process. International Journal of Clothing Science and Technology 1995; 7: 71 – 80.
• 13. Sundresan G, Salhotra KR, Hari PK. Strength Reduction in Sewing Threads During High Speed Sewing in Industrial Lockstitch Machine – Part I. Effect of Thread and Fabric Properties. International Journal of Clothing Science and Technology 1998; 10: 64 – 79.
• 14. Ajiki I, Postle R. Viscoelastic properties of Threads Before and After Sewing. In-ternational Journal of Clothing Science and Technology 2003; 15: 16 – 27.
• 15. Rudolf A, Geršak J. Influence of Sewing Speed on the Changes of Mechanical Properties of Differently Twisted and Lubricated Threads During The Process of Sewing. Tekstil 2007; 56, 5: 271 – 277.
• 16. Pogorelova M, Kamilatova O. The Influence of Deformation Pecularities of Sewing Threads on Seam Properties. Tekhnologiya Tekstil’noy Promyshlennosti (Technology of Textile Industry), State Technological University of Kostroma, 2007; 304, 6: 19 – 22 (In Russian).
• 17. Midha VK, Kothari VK, Chatopadhyay R, Mukhopadhyay A. Studies on the Changes in Tensile Properties of Sewing Thread at Different Sewing Stages. Textile Research Journal 2009; 79 (13): 1155 – 1167.
• 18. Jucienė M, Vobolis J. Correlation between the Seam Stitch Length of the Sewing Garment and Friction Forces. Material Science ( Medžiagotyra) 2007; 13, 14: 74 – 78.
• 19. Jucienė M, Vobolis J. Investigation of the influence of defects of sewing machine V-belt drive on the stitch length. Tekstil 2004; 53, 5: 219 – 225.
• 20. Jucienė M, Vobolis J. Dependence of Stitch Length along the Seam on External Friction Force Theoretical Anglysis. Materials Science (Medžiagotyra) 2009; 15, 3: 273 – 276.
• 21. Vobolis J, Jucienė M, Punys J, Vaitkevičius V. Influence of Selected Machine and Material Parameters on the Stitch Length and Its Irregularity. Fibers & Textiles in Eastern Europe 2003; 11, 3 (42): 50 – 55.
• 22. Dobilaitė V, Jucienė M. Influence of Sewing Machine Parameters on Seam Pucker. Tekstil 2007; 56, 5: 286 – 292.
• 23. Dobilaitė V, Jucienė M. Seam pucker Indicators and Their Dependence upon the Parameters of sewing machine. International Journal of Clothing Science and Technology 2008; 20, 4: 231 – 239.
• 24. Chernenko DA. Systematization of design parameters for automated embroidery and modeling of deformation system of „fabric-embroidery”. Doctoral Disertation, State Technological University of Orel, Orel, 2006, p. 132.
• 25. Radavičienė S, Jucienė M. Investigation of Mechanical Properties of Embroidery threads. In: 5th International Textile, Clothing & Design Conference, Dubrovnik, Croatija, 3 - 6 October 2010, pp. 494 – 499.
• 26. El Gholmy S, Bondok N, El Geiheini A. Optimization of embroidery design on denim fabrics. In: 5th International Textile, Clothing & Design Conference, Dubrovnik, Croatija, 3 - 6 October 2010, pp. 821 – 826.