Dielectric properties of Y-doped Ba1-xSrxTiO3 ceramics

• Autorzy: Xu J. , Liu H. X. , He B. , Hao H. , Li Y. Q. , Cao M. H. , Yu Z. Y.
• Języki publikacji: EN

Abstrakty

EN

Y-doped Ba1-xSrxTiO3 (Y-BST) ceramics (x = 0.1, 0.2, 0.4, 0.7) were prepared by solid-state reaction and sintered at 1250, 1300, 1350, and 1400 °C for 1 h. The effect of strontium solution and sintering temperature on the structure, microstructure and dielectric properties of Y-BST was investigated. SEM investigations revealed a grain size decreasing with the Sr content increase. The temperature dependence of permittivity showed decrease in phase transition temperature with higher Sr content. Enhancing sintering temperature is effective to increase the grain size and improve the microstructure porosity. The XRD patterns of all Y-doped Ba0.3Sr0.7TiO3ceramics indicated that the crystal cell parameters increase when temperature increased. However, the (002) and (200) peaks of Y-doped Ba0.3Sr0.7TiO3 split when sintering temperature was increased to 1400 °C, which makes the structure of the specimen transit to tetragonal (a = 3.9857 A and c = 4.018 A) from cubic. It may be attributed to the fact that Y3+ ion can occupy both A site and B site of Ba0.3Sr0.7TiO3 sintered at 1400 °C, which leads to the large different internal stress in individual grains, and then induces the structure change. The temperature coefficient of capacitance (TCC) value of the Y-doped Ba0.3Sr0.7TiO3 sintered at 1400 °C changed little within š6% over a temperature range from 10 to130 °C.

Słowa kluczowe

EN

Y-doped; Ba1-xSrxTiO3 ceramics; dielectric properties

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Optica Applicata
• Rocznik: 2010
• Tom: Vol. 40, nr 1
• Strony: 255--264
• Opis fizyczny: Bibliogr. 23 poz.

Twórcy

autor

Xu J.

autor

Liu H. X.

autor

He B.

autor

Hao H.

autor

Li Y. Q.

autor

Cao M. H.

autor

Yu Z. Y.

• State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, 122 Luo Shi Road, Wuhan 430070, China

Bibliografia

• [1] ANDRICH E., Properties and applications of PTC thermistors, Electron. Appl. 26, 1965, pp. 123–144.
• [2] KUMAGAI S., WAKINO K., ANDO A., KITAZAWA T., Novel evaluation method for complex high permittivity of BaTiO3 families at microwave frequency, Journal of the European Ceramic Society 26(10–11), 2006, pp. 1817–1820.
• [3] HARI SINGH NALWA, Handbook of Low and High Dielectric Constant Materials and Their Applications, Academic Press, New York, Vol. 2, 1999, pp. 533–539.
• [4] GERVAIS F., CALES B., ODIER P., Characterization of strontium titanate ceramics by infrared reflectivity spectroscopy and electron paramagnetic resonance, Materials Research Bulletin 22(12), 1987, pp. 1629–1633.
• [5] ROEDER R.K., SLAMOVICH E.B., Stoichiometry control and phase selection in hydrothermally derived BaxSr1–xTiO3 powders, Journal of the American Ceramic Society 82(7), 1999, pp. 1665–1675.
• [6] KISHI H., MIZUNO Y., CHAZONO H., Base-metal electrode-multilayer ceramic capacitors: Past, present and future perspectives, Japanese Journal of Applied Physics 42(1), 2003, pp. 1–15.
• [7] YIH-CHIEN CHEN, PING-CHOU CHEN, SHUN-CHUNG WANG, SHOU-ZHUANG LIN, Curve fitting of dielectric constant and loss factor of ZrO2-doped barium strontium titanate for application in phased array antennas, Japanese Journal of Applied Physics 46(9A), 2007, pp. 5889–5893.
• [8] ALEXANDRU H.V., BERBECARU C., STANCULESCU F., IOACHIM A., BANCIU M.G., TOACSEN M.I., NEDELCU L., GHETU D., STOICA G., Ferroelectric solid solutions (Ba,Sr)TiO3 for microwave applications, Materials Science and Engineering B 118(1–3), 2005, pp. 92–96.
• [9] SHI-MEI SU, LIANG-YING ZHANG, HONG-TAO SUN, XI YAO, Preparation of porous BaTiO3 PTC thermistors by adding graphite porosifiers, Journal of the American Ceramic Society 77(8), 1994, pp. 2154–2156.
• [10] JAFFE B., COOK W.R., JAFFE H., Piezoelectric Ceramics, Academic Press Ltd. Reported by R.A.N. Publishers, Marietta, Ohio, 1971.
• [11] LEMANOV V.V., SMIRNOVA E.P., SYRNIKOV P.P., TARAKANOV E.A., Phase transitions and glasslike behavior in Sr1–xBaxTiO3, Physical Review B 54(5), 1996, pp. 3151–3157.
• [12] LIQIN ZHOU, VILARINHO P.M., BAPTISTA J.L., Dependence of the structural and dielectric properties of Ba1–xSrxTiO3 ceramic solid solutions on raw material processing, Journal of the European Ceramic Society 19(11), 1999, pp. 2015–2020.
• [13] BUSCAGLIA V., BUSCAGLIA M.T., VIVIANI M., MITOSERIU L., NANNI P., TREFILETTI V., PIAGGIO P., GREGORA I., OSTAPCHUK T., POKORNÝ J., PETZELT J., Grain size and grain boundary-related effects on the properties of nanocrystalline barium titanate ceramics, Journal of the European Ceramic Society 26(14), 2006, pp. 2889–2898.
• [14] YUANLIANG LI, YUANFANG QU, Substitution preference and dielectric properties of Y3+-doped Ba0.62Sr0.38TiO3 ceramics, Materials Chemistry and Physics 110(1), 2008, pp. 155–159.
• [15] SHIGEKI SATO, YUKIE NAKANO, AKIRA SATO, TAKESHI NOMURA, Effect of Y-doping on resistance degradation of multilayer ceramic capacitors with Ni electrodes under the highly accelerated life test, Japanese Journal of Applied Physics 36(9B), 1997, pp. 6016–6020.
• [16] CHATTOPADHYAY S., AYYUB P., PALKAR V.R., MULTANI M., Size-induced diffuse phase transition in the nanocrystalline ferroelectric PbTiO3, Physical Review B 52(18), 1995, pp. 13177–13183.
• [17] CROSS L.E., Relaxorferroelectrics: An overview, Ferroelectrics 151(1), 1994, pp. 305–320.
• [18] TSUR Y., DUNBAR T.D., RANDALL C.A., Crystal and defect chemistry of rare earth cations in BaTiO3, Journal of Electroceramics 7(1), 2001, pp. 25–34.
• [19] SHANNON R.D., Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides, Acta Crystallographica Section A 32(5), 1976, pp. 751–767.
• [20] MAKOVEC D., SAMARDZIJA Z., DROFENIK M., Solid solubility of holmium, yttrium, and dysprosium in BaTiO3, Journal of the American Ceramic Society 87(7), 2004, pp. 1324–1329.
• [21] SHIGEKI SATO, YUKIE NAKANO, AKIRA SATO, TAKESHI NOMURA, Mechanism of improvement of resistance degradation in Y-doped BaTiO3 based MLCCs with Ni electrodes under highly accelerated life testing, Journal of the European Ceramic Society 19(6–7), 1999, pp. 1061–1065.
• [22] ARMSTRONG T.R., BUCHANAN R.C., Influence of core-shell grains on the internal stress state and permittivity response of zirconia-modified barium titanate, Journal of the American Ceramic Society 73(5), 1990, pp. 1268–1273.
• [23] HENNINGS D., SCHNELL A., SIMON G., Diffuse ferroelectric phase transitions in Ba(Ti1–yZry)O3 ceramics, Journal of the American Ceramic Society 65(11), 1982, pp. 539–544.