Effect of thermal ageing on the evolution of microstructure and degradation of hardness of 2.25Cr-1Mo steel

• Autorzy: Jha B. B. , Mishra B. K. , Satpati B. , Ojha S. N.
• Języki publikacji: EN

Abstrakty

EN

Thermal ageing of various durations and at various temperatures was performed in order to understand microstructural changes associated with precipitation and coarsening of carbides in 2.25Cr-1Mo steel. The severity of thermal ageing is expressed in terms of the Larson-Miller parameter (LMP). The microstructural examinations were carried out by optical and scanning electron microscopy techniques. A transmission electron microscope (TEM) and an electron probe micro analyzer (EPMA) were used to identify the carbide particles, and to analyse the shape, size and distribution of the precipitate phases. Influence of these precipitates on hardness degradation of the steel has been examined. The reasons for the variation in the microstructure and for the hardness degradation of steel arising from thermal ageing are discussed.

Słowa kluczowe

EN

thermal ageing; microstructure; hardness degradation; 2.25Cr-1Mo steel2.25Cr-1Mo steel

• Wydawca: De Gruyter
• Czasopismo: Materials Science Poland
• Rocznik: 2010
• Tom: Vol. 28, No. 1
• Strony: 335--346
• Opis fizyczny: Bibliogr. 14 poz.

Twórcy

autor

Jha B. B.

autor

Mishra B. K.

autor

Satpati B.

autor

Ojha S. N.

• Advanced Materials Technology Division, IMMT Bhubaneswar-751013 India

Bibliografia

• [1] SANDERSON J., [In:] Ferritic steels for high temperature applications, Proc. Conf. ASM,A. Khare (Ed.), (1983), p. 178.
• [2] PATTERSON S.R., KUNTZ T.A., MOSER R.S., VAILLANCOURT H., [In:] Boiler tube failure metallurgical guide, Vol. 1, Techn. Rep.(TR-102433), Electric Power Research Institute, Palo Alto, CA, (1993), p. 26.
• [3] VISWANATHAN R., Damage mechanisms and life assessment of high temperature components, ASM Int., Metal Park, Ohio, (1989), p. 205.
• [4] PATRIARCA D., [In:] Topical conference on ferritic steels for use in nuclear technologies, Metall. Soc. AMIE, J.W. Davies, D.J. Michel (Eds.), (1984), p. 107.
• [5] THOMSON R.C., Bhadeshia H.K.D.H., Mater. Sci. Tech., 10 (1994), 193.
• [6] GOPE N., MUKHERJEE T., SARMA D.S., Mater. Trans. JIM, 33 (1992), 110.
• [7] SAROJA S., PARAMESWARAN P., VIJAYALAXMI M., RAGHUNATHAN V.S., Acta Metall. Mater., 43 (1995), 2985.
• [8] VISWANATHAN R., PATTERSON S.R., GRUNLOH H., GEHL S., J. Press. Vessel Techn., 116 (1994), 1.
• [9] CANE B.J., APLINE P.F., BREAR J.M., J. Press. Vessel Techn., 107 (1985), 295.
• [10] JAYAN V., MANDAL P.K., HIRANI M., SANYAL S.K., Mater. Sci. Techn., 15 (1999), 1308.
• [11] GANESAN V., RODRIGUEZ P., [In:] Materials aging and life management, B. Raj [Ed.], Proc. Int.Symp. Materials Ageing and Life Management, Kalpakkam, India, Allied Publishers Ltd., Chennai,(2000), p. 293.
• [12] JAYAN V., KHAN M.Y., HUSAIN M., Mater. Lett., 58 (2004), 2569.
• [13] FUJIAMA K., KIMURA K., MURAMATSU M., YAMADA M., ISIJ Int., 30 (1990), 869.
• [14] GOPE N., CHATTERJEE A., MUKHERJEE T., SARMA D.S., Metall. Trans. A, 24 (1993), 315.