Integrated design for large-scale opto-mechanical structure

• Autorzy: Li A. , Bian Y. , Liang Y. , Zhu Y.
• Języki publikacji: EN

Abstrakty

EN

An integrated design method is discussed which thoroughly considers related parameters of the various subsystems in order to optimize the overall system that mainly consists of opto-mechanical structure CAD, CAE and the integrated information platform PDM. Based on the parameter drive of the virtual main model, the method focuses on the model transformation and data share among different design and analysis steps, and so the concurrent simulation and design optimization are carried out. As an example of application, the integrated design for a large-scale opto-mechanical structure is introduced, including optical design, structure design and analysis, which further validates the advantages of the method. Due to comprehensive consideration of the design and analysis process by CAD and CAE based on PDM, the integrated design well attains the structure optimization with high efficiency.

Słowa kluczowe

EN

integrated design; CAD/CAE; large-scale structure; optical instrument

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Optica Applicata
• Rocznik: 2009
• Tom: Vol. 39, nr 2
• Strony: 383--389
• Opis fizyczny: bibliogr. 10 poz.,

Twórcy

autor

Li A.

autor

Bian Y.

autor

Liang Y.

autor

Zhu Y.

• School of Mechanical Engineering, Tongji University, Shanghai 200092, China

Bibliografia

• [1] FITZSIMMONS J., DUNN J., HERRIOT G., JOLISSAINT L., ROBERTS S.C., COOPER K., MAMOU M., Predicting the aerodynamic performance of the Canadian Very Large Optical Telescope, Proceedings of SPIE 5497, 2004, pp. 321–328.
• [2] ZAGO L., GENEQUAND P.M., KJELBERG I., MORSCHEL J., Application of flexure structures to active and adaptive opto-mechanical mechanisms, Proceedings of SPIE 2871, 1997, pp. 127–135.
• [3] YODER P.R., JR., Opto-Mechanical Systems Design, CRC Press, 2005, 3th Ed., Boca Raton.
• [4] MILLER J.M., Inter-active graphic methods for automating mechanical engineering design and analyses, Annual ACM IEEE Design Automation Conference, Proceedings of the 17th Conference on Design Automation, 1980, pp. 114–128.
• [5] YODER P.R., JR., Optomechanical design, engineering, and assembly: 60 years of evolution, Proceedings of SPIE 6666, 2007, p. 666610.
• [6] EDWARDS M.L., EIKENBERRY S.S., MARIN-FRANCH A., CHARCOS-LLORENS M., RODGERS M., JULIAN J., RAINES N., PACKHAM C., The Canarias Infrared Camera Experiment (CIRCE): optical and opto-mechanical design and manufacture, Proceedings of SPIE 6269, 2006, p. 62694Z.
• [7] BAOZHONG SHAN, BAOPING GUO, SHUYAN WANG, HANBEN NIU, Opto-mechanical integrated analysis for optical system, Proceedings of SPIE 6034, 2006, p. 603404.
• [8] HAUMONTÉ J.-B., VENTURINO J.-C., DENIS X., Simplifying the conception of opto-mechanical systems thanks to direct integration of optical design capabilities in mechanical CAD software, Proceedings of SPIE 6034, 2006, p. 603408.
• [9] ANHU LI, LIREN LIU, JIANFENG SUN, YONGJIAN ZHU, QIANDE SHEN, Finite element analysis on a circular wedge prism with 400 mm diameter, Optik – International Journal for Light and Electron Optics 118(12), 2007, pp. 589–593.
• [10] CHLEBUS E., CHOLEWA M., DUDZIK R., KOZERA M., CAx application for process oriented concurrent design, Journal of Materials Processing Technology 76(1–3), 1998, pp. 176–181.