PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Consolidation and sintering of nanometric ceramic powders

Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Two powders containing 97 mol % ZrO2 and 3 mol %Y2O3 with different crystallite sizes have been prepared by the hydrothermal method and calcination of co-precipitated gel. The hydrothermal powder was filter pressed under 5 MPa and dry pressed under 20 to 200 MPa. Filter pressed samples showed a more uniform particle arrangement than dry pressed samples which resulted in a better densification of the samples during sintering. Milling in water, and subsequent sedimentation of the calcinated powder allowed selecting fine particles for the filter pressing process.
Wydawca
Rocznik
Strony
395--402
Opis fizyczny
Bibliogr. 10 poz.
Twórcy
autor
  • AGH University of Science and Technology, Faculty of Materials Science and Ceramics, al. Mickiewicza 30, 30-059 Cracow, Poland
Bibliografia
  • [1] KINGERY W.D., FRANCOIS B., The Sintering of Crystalline Oxides. I. Interactions between Grain Boundaries and Pores, [in:] Sintering and Related Phenomena, G.C. Kuczynski, N.A. Hooton, C.F. Gibbon (Eds.), Gordon and Breach, New York, 1967, p. 471.
  • [2] MAYO M.J., CHEN D-J., HAGUE D.C., Consolidation of Nanocrystalline Materials by Compaction and Sintering, [in:] Nanomaterials. Synthesis, Properties and Applications, A.S. Edelstein, R.C. Cammerata (Eds.), Institute of Physics Publ., Philadelphia, 1997, p. 165.
  • [3] GAO L., LI W., WANG H.Z., ZHOU J.X., CHAO Z.J. AND ZAI Q.Z., J. Eur. Ceram. Soc., 21 (2001), 135.
  • [4] DURÁN P., VILLEGAS M., CAPEL F., RECIO P., MOURE C., J. Eur. Ceram. Soc., 16 (1996), 945.
  • [5] RHODES W.H., J. Am. Ceram. Soc., 64 (1981), 19.
  • [6] UCHIKOSHI T., SAKKA Y., OZAWA K., HIRAGA K., J. Eur. Ceram. Soc., 18 (1998), 669.
  • [7] LANGE F.F., J. Am. Ceram. Soc., 72 (1989), 3.
  • [8] BUĆKO M.M., HABERKO K., FARYNA M., J. Am. Ceram. Soc., 78 (1995), 3397.
  • [9] ZYCH L., HABERKO K., Solid State Phenom., 94 (2003), 157.
  • [10] ZYCH L., HABERKO K., Key Eng. Mater., 264–268 (2004), 2323.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW7-0007-0208
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.