Hybrid piezoelectric motor based on electroactive lubrication principle

• Autorzy: Rouchon J. F. , Harribey D. , Tran D. H. , Ryndzionek R. , Sienkiewicz Ł. , Ronkowski M.
• Języki publikacji: EN

Abstrakty

EN

A novel conception of hybrid piezoelectric motor is presented in this paper. Proposed conception required synchronized work of quasi-static and resonant piezoelectric actuators that results in a rotary movement. The motor's working principle is explained and the main characteristics are described. Studied topology is compared to the existing piezoelectric motors with regards to its field of applications. The assembling process of the motor is briefly explained with emphasis put on the frequency and impedance tuning of the piezoelectric actuators. Next, the power supply system is described. Finally, conclusions are presented concerning the features of the hybrid piezoelectric motor and possible solutions of the faced problems.

Słowa kluczowe

EN

piezoelectricity; piezoelectric hybrid motor; actuators; quasi-static; resonant; electroactive lubrication

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Politechniki Wrocławskiej. Studia i Materiały
• Rocznik: 2012
• Tom: Vol. 66, nr 32, t. 1
• Strony: 326--332
• Opis fizyczny: Bibliogr. 12 poz., rys.

Twórcy

autor

Rouchon J. F.

autor

Harribey D.

autor

Tran D. H.

autor

Ryndzionek R.

autor

Sienkiewicz Ł.

autor

Ronkowski M.

• Université de Toulouse - Laboratoire Plasma et Conversion d'Energie LAPLACE, UMR CNRS 52132 rue Camichel, 31071 Toulouse, France,

Bibliografia

• [1] BISHOP R. H., The Mechatronics Handbook, The University of Texas, Austin 2002.
• [2] ROUCHON J.-F., CÉNAC-MORTHÉ C., GARBUIO L., Control of friction forces with stationary wave piezoelectric actuator, Journal of Vibroengineering, Vol. 10, Iss. 2, June, 2008, 131–135.
• [3] NOGAREDE B., HARRIBEY D., De la piezoelectricite aux actionneurs electromecaniques du futur, INP-ENSEEIHT-LAPLACE, Le groupe de Recherché en Electrodynamique, 2005.
• [4] NOGAREDE B., HENAUX C., ROUCHON J.-F., Actionneurs électromécaniques pour la robotique et le positionnement, Techniques de l’Ingenieur (D5341), 2009, 1–20.
• [5] NOGAREDE B., Moteurs piezoelectriques, Techniques de l’Ingenieur (D3765), 1996, 1–20.
• [6] J-F ROUCHON, P. JACOB, Structure de moteur pas à pas de type chenille. Déposant: AREVATA- INPT, n° de brevet FR2948244.
• [7] SALANSON J., Motorisations piézoélectriques à fonctionnement quasiréonnant ou quasistatique: analyse des contraintes d’alimentation et expérimentation de structures innovantes, Thèse de doctorat, INP-ENSEEIHT-LEEI, Toulouse 2000.
• [8] SASHIDA T., KENJO T., An introduction to ultrasonic motors, Oxford, Clarendon Press, 1993.
• [9] SHUYU L., Load characteristics of high power sandwich piezoelectric ultrasonic transducer, Ultrasonics, Vol. 43, Iss. 5, 2005, 365–373.
• [10] SZŁABOWICZ W., Contribution au dimensionnement et a la réealisation d’actionneur piézoeléctrique a rotation de mode fort coupe pour applications aéronautiques, Thèse de doctorat, INP-ENSEEIHT-LEEI, Toulouse 2006.
• [11] TRAN D.H., ROUCHON J.-F, NOGAREDE B., Design of a Power Inverter and Transformer for Piezoelectric Actuator, 10th The IEEE International Workshop on Electronics, Control, Measurement and Signals (ECMS), June 1–3, 2011, Liberec, Czech Republic, 1–6.
• [12] SHINSEI CORPORATION: http://www.shinsei motor.com/English/techno/ultrasonic_motor.html