Plastics in new and end-of-life electrical and electronic equipment

• Autorzy: Machnicka-Hławiczka M. , Walczak K. , Rejman-Burzyńska A.

Warianty tytułu

PL

Tworzywa sztuczne w nowych i odpadowym sprzęcie elektrycznym i elektronicznym

• Konferencja: V Środkowoeuropejska Konferencja. Recykling i odzysk materiałów polimerowych. Wrocław, 18-20 października 2006
• Języki publikacji: EN

Abstrakty

EN

Nowadays electrical and electronic (E&E) sector is highly innovative one and this is in part due to the fact that it is based on use of plastics. Thanks to their multipurpose characteristics which are perfectly suited to today's techniques, plastics are an ideal resource to produce highly functioning electronic products and are available to satisfy the wide range of quality requirements of the different applications. Plastics in E&E equipment can help save resources because they facilitate the ongoing reduction of energy consumption during the use phase. Important is also the fact that the price performance ratio of electrical and electronic equipment is getting better every day. As a result, a large quantity of plastics is used in E&E equipment manufacture and today it is about 8% of entire (total) plastics production.

PL

Omówiono rodzaje i właściwości tworzyw sztucznych stosowanych w urządzeniach elektrycznych i elektronicznych, zwrócono uwagę na dodatki opóźniające palenie i inne dodatki. zwłaszcza zawierające metale ciężkie. Przedyskutowano operacje związane z zagospodarowaniem odpadów WEEE. ze szczególnym uwzględnieniem demontażu oraz mielenia.

Słowa kluczowe

EN

ABS; high impact polystyrene; polypropylene; flame retardant

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Inżynierii Ochrony Środowiska Politechniki Wrocławskiej. Konferencje
• Rocznik: 2006
• Tom: Vol. 81, nr 12
• Strony: 149--154
• Opis fizyczny: Bibliogr. 12 poz.

Twórcy

autor

Machnicka-Hławiczka M.

autor

Walczak K.

autor

Rejman-Burzyńska A.

• Główny Instytut Górnictwa , Katowice

Bibliografia

• [1] Plastics Insight Into Consumption and Recovery in Western Europe 2000,.The Association of Plastics Manufactures of Europe (APME), Summer 2001.
• [2] Management of Plastics in EOL Electronics, Environment and Plastics Industry Council, April 2003.
• [3] Plastics from Electronics Update, American Plastics Council, Summer 2003.
• [4] Plastics from Residential Electronics Recycling, American Plastics Council, 2000.
• [5] FRANK E. Mark, The characteristics of plastics-rich waste streams from end-of-life electrical and electronic equipment, Dow Chemical Europe. January 2006, www.plasticseurope.org
• [6] DROCHMAN D., TANGE L., End-of-Life Management of Plastics from Electrical and Electronic Equipment Containing Brominated Flame Retardants, Paper given at conference: Recycling and Electronic Equipment 5". London.3 December 2002.
• [7] Flame Retardants in E&E equipment and Building Products, Taylor Sofres and the Association of Plastics Manufactures of Europe, Summer 2001.
• [8] Recovery of Plastics from Municipally Collected Electrical and Electronics Goods, MBA Polymers. Inc. 1999.
• [9] DILLON P.S., Recycling Plastics from Electronics: Challenges & Opportunities, papers presented at the IAER Roadmap Development Workshop, May 2000.
• [10] Management of Plastics in EOL Electronics, Environment and Plastics Industry Council. April 2003.
• [11] lmproving the Recycling of Plastics from Electronics, Resource Recycling. January. 2002.
• [12] Plastics Recycling of Mass Consumer Products in Europe, Project EV5V-CT92-0241.