Machine tool design and safety optimization

• Autorzy: Spur G. , Uhlmann E. , Ising M.

Warianty tytułu

PL

Konstrukcja obrabiarek i bezpieczna optymalizacja

• Konferencja: XI Workshop on Supervising and Diagnostics of Machining Systems, Karpacz , Poland March 12-17, 2000
• Języki publikacji: EN

Abstrakty

EN

The time required for the development of machine tools can be reduced if computer-aided tools for product and process design are applied in the early stages of the product development process. This paper describes a prototype of a product development workplace for machine tools which combines computer tools for calculation, design, and assessment of machine tools with a module to support the structuring of operations in product development. In addition to functional requirements, the design of machine tools has to take into account effective safety measures following the latest European standards regarding the protection of operators. To support the design of machine tools complying with safety principles the product development workplace was extended by a "safety engineering" (SE) module. Central component of the SE system module is an integrated FEM calculation, analysing the material behavior of high-dynamically stressed safeguard components under standardized test conditions.

Słowa kluczowe

EN

machine tools; product development; workplace safety; safety assessment; operator protection; safety engineering

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Technologii Maszyn i Automatyzacji Politechniki Wrocławskiej. Konferencje
• Rocznik: 2000
• Tom: Vol. 76, nr 35
• Strony: 5--12
• Opis fizyczny: Bibliogr. 10 poz.,

Twórcy

autor

Spur G.

autor

Uhlmann E.

autor

Ising M.

• Inst. for Machine Tools & Factory Manage., Tech. Univ. Berlin, Germany