PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Synthesis and hardening of fluoralinite cement

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In this paper the synthesis of fluoralinite cement and its hydration properties are presented. It was determined, that fluoralinite has been obtained after 4 hrs at 1100 °C temperature without difficulty, by using in the initial composition of 0.89 % Al2O3, 1.78 % MgO and 0.89 % Fe2O3 additions. Specimens, formed from fluoralinite clinker and grinded sand (fluoralinite clinker and sand mass ratio 1:3) and hydrothermal cured at 175 °C for 4 hrs, had the biggest strength (4.68 MPa). Thus, fluoralinite cement is usable for hydrothermal curing articles. X-Ray analysis has shown, that, while hardening of the mix of fluoralinite and quartz sand for 28 days in normal conditions, quartz, tobermorite gel, portlandite Ca(OH)2 and CaF2 prevail in the samples. Whereas this mix hardens in hydrothermal conditions, calcium hydrosilicate C - S - H (I) and Ca(OH)2 form.
Słowa kluczowe
Wydawca
Rocznik
Strony
385--393
Opis fizyczny
Bibliogr. 7 poz.
Twórcy
autor
  • Faculty of Chemical Technology, Kaunas University of Technology, Radvilenu str. 19, 50254 Kaunas, Lithuania, aras.kantautas@ktu.lt
Bibliografia
  • [1] LUDWIG U., URBONAS L., Zement-Kalk-Gips, 46 (1993), 568.
  • [2] MOIR G.K., Phil. Trans. Roy. Soc. Lond., 310 (1983), 127.
  • [3] OLDEL J., ABDUL-MAULA S., J. Amer. Ceram. Soc., 70 (1987), 39.
  • [4] GILLIOLI C., MASSAZZA F., PEZZUOLI M., Cem. Concr. Res., 9 (1979), 295.
  • [5] GORSHKOV V.S., TIMASHEV V.V., SAVELJEV V.G., Physical and Chemical Analysis Methods of Binding Materials (in Russian), Vysshaya Shkola, Moscow, 1981.
  • [6] GUTT W., OSBORNE J.P., Trans. Brit. Ceram. Soc., 67 (1968), 125.
  • [7] KIM Y.M., HONG S.H., KIM H., J. Amer. Ceram. Soc., 85 (2002), 1941.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW1-0021-0062
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.