Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The present study deals with investigations relating to dry sliding wear behaviour of Al 2219 alloy, reinforced with SiC particles of 0-15 weight percent in steps of 5. The unlubricated pin-on disc tests were conducted to examine the wear behavior of the aluminium alloy and its composites. The tests were conducted at varying load from 0 to 60 N and sliding speed of 1.53m/s, 3m/s 4.6m/s and 6.1m/s for a constant sliding distance of 5000 meters. The result showed that wear rates of the composites are lower than that of the matrix alloy and further decreased with the increase in SiCp content. As the load increases further cracking of SiCp particle occurs and a combination of abrasion, delamination and adhesive wear were observed. The samples were examined using scanning electronic microscope after wear testing and analyzed.
Wydawca
Czasopismo
Rocznik
Tom
Strony
357--366
Opis fizyczny
Bibliogr. 26 poz.
Twórcy
autor
autor
autor
autor
- Department of Mechanical Engineering, PSG College of Technology, Coimbatore 641 004, India, basavarajappas@yahoo.com
Bibliografia
- [1] IBRAHIM I.A., MOHAMED F.A., LAVERNIA E.J., J. Mater. Sci., 26 (1991), 1137.
- [2] SINCLAIR I., GREGSON P.J., Mater. Sci. Technol., 3 (1997), 709.
- [3] Ma T., YAMAURA T.H., KOSS D.A., VOIGT R.C., Mater. Sci. Eng. A., 360 (2003), 116.
- [4] PARK B.G., CROSKY A.G., HELLIER A.K., J. Mater. Sci., 36 (2001), 2417.
- [5] SRIVATSAN T.S., J. Mater. Sci., 31 (1996), 1375.
- [6] SEAH K.H.W., SHARMA S.C., GIRISH B.M., Composites A., 29 (1997), 251.
- [7] JHA A.K., DAN T.K., PRASAD S.V., ROHATGI P.K., J. Mater. Sci , 21 (1986), 3681.
- [8] SANNINO A.P., RACK H.J., Wear, 189 (1995), 1.
- [9] DEUIS R.L., SUBRAMANIAN C., YELLUP J.M., Wear, 201 (1996), 132.
- [10] NARAYAN M., SURAPPA M.K., PRAMILA BAI B.N., Wear, 181–183 (1995), 563.
- [11] SHIPWAY P.H., KENNEDY A.R., WILKES A.J., Wear, 216 (1998), 160.
- [12] KORKUT M.H., Mater. Sci. Technol., 20 (2004), 73.
- [13] VENKATARAMAN B., SUNDARARAJAN G., Wear, 245 (2000), 22.
- [14] LIM S.C., GUPTA M., REN L.J., KWOK K.M., J. Mater. Proc. Technol., 89–90 (1999), 591.
- [15] HASHIM J., LOONEY L., HASHMI M.S.J., Mater. Proc. Technol., 123 (2002), 251.
- [16] ZHOU W., XU Z.M., J. Mater. Proc. Technol., 63 (1997), 358.
- [17] SEAH K.H.W., SHARMA S.C., GIRESH B.M., LIM S.C., Mater. Design, 17 (1996), 63.
- [18] KIOURTSIDIS G.E., SKOLIANOS S.M., Wear, 253 (2002), 946.
- [19] DAS S., PRASAD S.V., RAMACHANDRAN T.R., Wear, 133 (1998), 173.
- [20] MURATOGLU M., AKSOY M., Mater. Sci. Eng. A, 282 (2000), 91.
- [21] PRASAD B.K., Wear, 252 (2002), 250.
- [22] BASAVARAJAPPA S., CHANDRAMOHAN G., International conference on recent advances in composite materials, Bhanaras Hindu University, Bhanaras, India, 2004, 625.
- [23] MOHAN S., PATHAK J.P., GUPTA R.C., SRIVASTAVA S., Metallkunde, 93 (2002), 1245.
- [24] GUO M.L.T., TSAO C.-Y.A., Mater. Sci. Eng. A, 333 (2002), 134.
- [25] FERHAT G., MEHMET A., Comp. Sci. Technol., 64 (2004) 959.
- [26] RIAHI A.R., ALPAS A.T., Wear, 251 (2001), 1396.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW1-0021-0059