Environmental friendly laser micro technologies in electrotechnics

• Autorzy: Pawlak R. , Tomczyk M. , Walczak M.
• Konferencja: Environmental friendly materials and technologies in electrotechnics, September, 10-11,2003, Jamrozowa Polana
• Języki publikacji: EN

Abstrakty

EN

Increasing consuming of energy and pollution of the environment inspire scientists to search new technologies in electrical and electronic engineering industry. From this point of view application of lasers is very promising and becoming more popular. The cleanness of the process and economically using of the produced energy are the main advantage of this technology. Laser welding of the small parts with very high precision and materials, unweldable by means of another methods as well as small heated region during this process enable us to use this technology in microelectronics. The most environmental friendly feature of the laser micro-technologies is reducing the consumption of lead in such joints. This is especially useful in the industry with the requirements of high degree of cleanness e.g. electronic manufacturing. The paper presents some examples of the technologies using laser in electronic and electrical engineering industry especially ones that have been elaborated in the Division of Materials Science and Electrotechnology at the Technical University of Lodz.

Słowa kluczowe

EN

laser treatment; microwelding; microarea; soldering; properties of laser beam; saving energy

PL

obróbka laserowa; mikrospawanie; lutowanie; właściwości wiązki laserowej; oszczędzanie energii

• Wydawca: Oficyna Wydawnicza Politechniki Wrocławskiej
• Czasopismo: Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej. Konferencje
• Rocznik: 2003
• Tom: Vol. 39, nr 14
• Strony: 56--64
• Opis fizyczny: bibliogr. 12 poz.

Twórcy

autor

Pawlak R.

• Technical University of Lodz, Materials Science and Electrotechnology Division

autor

Tomczyk M.

• Technical University of Lodz, Materials Science and Electrotechnology Division

autor

Walczak M.

Bibliografia

• [1] PAWLAK R., Laserowa modyfikacja właściwości materiałów przewodzących, Scientific Number of Publications of the Technical University of Lodz No 898, Łódź 2002, qualifying for assistant-professorship thesis.
• [2] KACZMAREK F., Wstęp do fizyki laserów PWN Warszawa 1986, ed. B changed.
• BUGAJSKI M., Modelowanie numeryczne laserów krawędziowych SCH SQW z AIGaAs/CaA, Referaty VI
• [3] Sympozjum Techniki Laserowej, Szczecin- Świnoujście 27 IX-1 X 1999, ed. Technical University of Szczecin 2001, pp. 28-40.
• [4] JANKIEWICZ Z., KOPCZYŃSKI K., Stan i perspektywy laserów dala stałego pobudzanych diodami półprzewodnikowymi, Referaty VI Sympozjum Techniki Laserowej, Szczecin- Świnoujście 27 IX-1 X 1999, ed. Technical University of Szczecin 2001, pp. 41-61.
• [5] STRITE T., ROSSINI V., ZUCKER E. and PETERS M., Reliable laser-diode technology impacts the industrial—laser marketplace —Laser Focus World, April 2003, pp. 55-59.
• [6] SIUZDAK J., Wstęp do współczesnej komunikacji światłowodowej, WKiŁ Warszawa, 1999.
• [7] MAJOR B., Ablacja i osadzanie laserem impulsowym, ed. by Wydawnictwo Naukowe Akapit, Kraków 2002.
• [8] MAZUMDER J., Overview of melt dynamics in laser processing, Optical Engineering, Vol. 30 (1991), No 8, pp. 1208-1219.
• [9] KAR A., MAZUMDER J., Model for noneguilibrium partitioning during rapid solidification of binary concentrated solutions, Acta metali. Mater. Vol. 40 (1992), No 8, pp. 1873-1881.
• [10] KAR A., ROCKSTROH T., MAZUMDER J., Two-dimensional model for laser-induced materials damage: Effects of assist gas and multiple reflections inside the cavity.
• [11] KOSTRUBIEC F., PAWLAK R. TOMCZYK M., Laser wire bonding in power devices- modelling of heat properties, 100' International Conference MIXDES 2003, Łódź, POLAND 26-28 June 2003, pp. 500-503.
• [12] KOSTRUBIEC F., PAWLAK R., WALCZAK M., Laser modification of properties of the surface layer of conducting materials, Proc. SPIE, Vol. 5229, Oct 2003, Laser Technology VII, Application of lasers, pp. 197-205.