PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Improvement of spatial resolution of Brillouin optical time domain reflectometer using spectral decomposition

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Brillouin optical time domain reflectometer (BOTDR) has been used for strain and temperature measurement and health monitoring in infrastructural systems. However, the spatial measurement resolution of BOTDR cannot yet meet the measuring needs of some specific local strains, such as the strain caused by a narrow crack or fissure in structures. In this paper, a spectral decomposition method is proposed and used for improving the spatial resolution. Based on the proportion of the strain length within the spatial resolution, taking the spectrum of the strain section from the measured spectrum, and fitting the decomposed Brillouin gain spectrum with the Lorentzian curve, the actual strain within a spatial resolution along optical fibers can be obtained. The experimental results demonstrate that this method is applicable to the modification of the measured strain whether its strained length is less or greater than the spatial resolution without considering the installation method of the optical fiber
Czasopismo
Rocznik
Strony
291--301
Opis fizyczny
Bibliogr. 13 poz., rys.
Twórcy
autor
  • ACEI, Department of Earth Sciences, Nanjing University, 210093, China
autor
  • ACEI, Department of Earth Sciences, Nanjing University, 210093, China
autor
  • ACEI, Department of Earth Sciences, Nanjing University, 210093, China
autor
  • ACEI, Department of Earth Sciences, Nanjing University, 210093, China
Bibliografia
  • [1] HORIGUCHI T., KURASHIMA T., TATEDA M., IEEE Photon. Technol. Lett. 1 (1989), 107.
  • [2] KURASHIMA T., HORIGUCHI T., IZUMITA H., FURUKUWA S., KOYAMADA Y., IEICE Trans. Commun. E76-B (1993), 382.
  • [3] KURASHIMA T., TATEDA M., HORIGUCHI T., KOYAMADA Y., IEEE Photon. Technol. Lett. 9 (1997), 360.
  • [4] HOTATE K., TANAKA M., IEICE Trans. Electron. E84-C (2001), 1823.
  • [5] BAO X., DEMERCHANT M., BROWN A., BREMNER T., J. Lightwave Technol. 19 (2001), 1698.
  • [6] OHNO H., NARUSE H., KIHARA M., SHIMADA A., Optical Fiber Technology 7 (2001), 45.
  • [7] YASUE N., NARUSE H., MASUDA J.I., KINO H., NAKAMURA T., YAMAURA T., IEICE Trans. Electron. E83-C (2000), 468.
  • [8] OHNO H., NARUSE H., KURASHIMA T., NOBIKI A., UCHIYAMA Y., KUSAKABE Y., IEICE Trans. Electron. E85-C (2002) 945.
  • [9] ZENG X., BAO X., CHHOA C., BREMNER T., BROWN A., DEMERCHANT M., FERRIER G., KALAMKAROVA., GEORGIADES A., Appl. Opt. 41 (2002), 5105.
  • [10] BROWN A., DEMERCHANT M., BAO X., BREMNER T., J. Lightwave Technol. 17 (1999), 1179.
  • [11] OHSAKI M., TATEDA M., OMATSU T., OHNO H., IEICE Trans. Commun. E85-B (2002), 1636.
  • [12] NITTA N., TATEDA M., OMATSU T., Opt. Rev. 9 (2002) 49.
  • [13] UCHIYAMA H., SAKAIRI Y., NOZAKI T., ANDO Technical Bulletin 10 (2002), 52.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPW1-0015-0025
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.