Development of approach to modelling and optimization of non-stationary catalytic processes in oil refining and petrochemistry

• Autorzy: Dolganova I.O. , Dolganov I.M. , Ivashkina E.N. , Ivanchina E.D. , Romanovskiy R.V.
• Języki publikacji: EN

Abstrakty

EN

An approach to modelling of non-stationary catalytic processes of oil refi ning and petrochemistry is proposed. The computer modelling systems under development take into account the physical and chemical reaction laws, raw materials composition, and catalyst nature. This allows using the software for the optimization of process conditions and equipment design. The models created can be applied for solving complex problems of chemical reactors design; calculation of different variants of industrial plants reconstruction; refi ning and petrochemicals catalysts selection and testing; catalyst service life prolongation; determination of optimum water supply into the alkanes dehydrogenation reactor; optimization of products separation in the benzene alkylation process.

Słowa kluczowe

EN

oil refining; mathematical model; non-stationary; technological mode; forecasting

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2012
• Tom: Vol. 14, nr 4
• Strony: 22--29
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Dolganova I.O.

autor

Dolganov I.M.

autor

Ivashkina E.N.

autor

Ivanchina E.D.

autor

Romanovskiy R.V.

• Tomsk Polytechnic University, 30, Lenin Avenue, Tomsk, 634050, Russia,

Bibliografia

• 1. Noskov, A.S. (2005). Two centuries of mathematical modeling. Report at the problem seminar on 90-th anniversary of Slinko M.G.
• 2. Kravtsov, A.V., Ivanchina, E.D. (1996). Intelligent systemsin chemical engineering and engineering education. Novosibirsk, Nauka.
• 3. Crane, J. (1961). Proceedings of the 4-th Int. PetroleumCongress, (3), 34.
• 4. Hutter, T. (1982). Development of kinetic model for catalytic reforming reactions: PhD Dis.
• 5. Andrevskiy, V. (1982). Modeling and optimal control of catalytic reforming reactor units: PhD. Dis.
• 6. Buzko, V.Y., Suhno, I.V., Panyushkin, V.T. & Ramazanova, D.N. (2005). Theoretical study of 1,4-dioxane complexes in the chair conformation with water by MNDO/PM3 semi-empirical method/ Journal of Structural Chemistry, (46), 618-624. DOI: 10.1007/s10947-006-0176-0.
• 7. Ivashkina, E.N. (2007). Improving of higher hydrocarbons C9-C14 dehydrogenation process efficiency: Ph.D. Dis.
• 8. Chenier P. (2002). Survey of Industrial Chemistry. Kluwer Academic/ Plenum Publishers.
• 9. Main constructive types of organic synthesis equipment. Retrieved October 15, 2011, from http://rudocs.exdat.com/docs/index-29959.html.
• 10. Anslyn, E.V., Dougherty, D.A. (2006). Modern physicalorganic chemistry, California: University Science Books.
• 11. Reutov, O. A., Kurtz, A.L., Butin, K.P. (2009). Organicchemistry. Part 2. Moscow, MSU.