Novel Modeling of the Phenomenon of Air-Cooled Solid

• Autorzy: Pluta Z. , Hryniewicz T.
• Języki publikacji: EN

Abstrakty

EN

The paper turns the attention to the thermal problems of the solid cooling in air. The physical aspect of mathematic approach has been underlined. The analysis and critical evaluation of Newton's Law concerning the solid air-cooling have been performed. The cognitive path leading to the solution is presented with the result being the body temperature dependence on time of cooling down in the air. Then the course of solution concerning the result of the adequate dependence of temperature of the cooled body on time has been presented. In the study, the stress is put on constant magnitudes chich characterize the susceptibility of solid to the cooling in the air. In the end, the synthetic formulation of all functional characteristics of the thermal phenomenon discussed in the paper, have been presented.

Słowa kluczowe

EN

phenomenon of body cooling; thermal space-time; potential field; time constant; cooling rate; temperature; time

• Wydawca: Przedsiębiorstwo Wydawnictw Naukowych "DARWIN"
• Czasopismo: International Letters of Chemistry, Physics and Astronomy
• Rocznik: 2013
• Tom: Vol. 1
• Strony: 1--16
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Pluta Z.

autor

Hryniewicz T.

• Koszalin University of Technology, Raclawicka 15-17, PL 75-620 Koszalin, Poland

Bibliografia

• [1] Z. Osinski, Przeglad Mechaniczny, 51(16) (1996) 11-15 (in Polish).
• [2] W. Bogusz, J. Giergiel, S. Kasprzyk, M. Zabawa, A. Muszynska, J. Muszynski, B. Radziszewski, J. Szadkowski, Problems of stability in discrete systems. Non-linear vibrations, PWN, Warszawa 1971, 9-52 (in Polish).
• [3] Z. Dabrowski, Przeglad Mechaniczny 62(11) (2007) 15-18 (in Polish).
• [4] A. Momber, R. Kovacevic, Principles of Abrasive Water Jet Machining, Springer- Verlag Berlin Heilderberg New York, 1988.
• [5] A. Momber A., Kovacevic R., Manufacturing Science and Engineering 68(1) (1994) 361-366.
• [6] E. Wantuch, R. Kot, Problem of projection accuracy of curvilinear path under treatment using high-pressure water-abrasive jet system (in Polish). Proc. of 26th Sci. School on Abrasive Treatment, Łódz, September 2003, 329-337.
• [7] E. Wantuch, P. Dudek, T. Jarosz, R. Kot, Mechanik 79(4) (2006) 266-271 (in Polish).
• [8] P. Słowik, W. Zowczak, Mechanik 81(11) (2008) 948-950 (in Polish).
• [9] W. Zowczak, Przeglad Elektrotechniczny 7 (2008) 129-131 (in Polish).
• [10] W. Wrona, Mathematics, Part 2 (in Polish), PWN, Warszawa 1967.
• [11] Zdzisław Pluta, Fundamentals of surface smoothing by elastic abrasive wheels (in Polish). Wydawnictwo Politechniki Koszalinskiej, Koszalin 2007.
• [12] Zdzisław Pluta, Tadeusz Hryniewicz, Int. J. Adv. Manuf. Technol. 51 (2010) 217-223 DOI:10.1007/s 00170-010-2595-5.
• [13] Zdzisław Pluta, Tadeusz Hryniewicz, Int. J. Adv. Manuf. Technol. 62(5) (2012) 529-542, DOI:10.1007/s 00170-011-3813-5.