PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Zatosowanie fibrylizowanych włókien polipropylenowych do zbrojenia betonu

Identyfikatory
Warianty tytułu
EN
Utilization of fibrillated polypropylene fibres in the concrete reinforcement
Języki publikacji
PL
Abstrakty
EN
Fibrillated polypropylene fibres for concrete reinforcement were produced. The fibres were formed in industrial conditions at different formation parameters. Selected fibres with the best mechanical parameters were used for concrete reinforcement. Compressive strength of concrete and freeze resistance was investigated. In addition, a microscopic examinations ofthe fracture of concrete samples were performed. It was stated that fibres have satisfactory mechanical propenies. The network structure of fibres enables formation of stronger bonds and better adhesion of fibres to concrete components. Addition of fibres inhibits the propagation ofcracks in concrete and increases the resistance of concrete to the destructive effects of cyclic freezing.
Słowa kluczowe
Rocznik
Tom
Strony
31--34
Opis fizyczny
Bibliogr. 14 poz., tab., rys.
Twórcy
autor
  • Instytut Inżynierii Tekstyliów i Materiałów Polimerowych Akademii Techniczno-Humanistycznej w Bielku-Białej
Bibliografia
  • 1. Zheng Z., Feldman D., 1995, Synthetic fibre - reinforced concrete. Prog. Polym. Sci., 20, s. 185-210.
  • 2. Song P. S., Hwang S.. Sheu B. C, 2005, Strenght properties of nylon and polypropylene fiber reinforced concretes, Cement & Concrete Res.,35. s. 1546-1550.
  • 3. Sun Z., Xu O., 2009, Microscopic, physical and mechantcal analysis, of polypropylene fiber reinforced concrete, Materials Science & Engineering. A 527, s. 198 - 204.
  • 4. Alhozaimy A. M., Soroushian R., Mirza F., 1996, Mechanical Properties, of Polypropylene Fiber Reinforced Conerete and the Effects of pozzolanic materials, Cement & Conerete Res., 18, s. 85 - 92.
  • 5. Banthia N., Gupta R., 2006, Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete, Cement & Concrete Res.. 36, s. 1263-1267.
  • 6. Stawarski E., Petri M., 2005. Techniczna celowość stosowania mikrozbrojenia zapraw cementowych z włóknami polipropylenowymi w budownictwie górniczym. Górnictwo i Geoinżynieria, 29, 3/1, s. 399-407.
  • 7. Zollo R. F., 1997. Fiber-reinforced Conerete: an Overview after 30 Years of Development, Cement & Concrete Composites, 19, s. 107 - 122.
  • 8. Mirabedini S. M., Rahimi H., Hamedifar S., Mohseni S.M., 2004, Microwave irradiation of polypropylene surface: a study on wettability and adhesion, Intern. J. Adhesion & Adhesives, 24, s. 163 - 170.
  • 9. Tu L., Kruger D., Wagener J. B., Cartens P. A. B., 1997, Wettability of Surface Oxyfluorinated Polypropylene fibers and Its Effect on Interfacial Bonding with Cementitious Matrix, Journal of Adhesion, 62, s. 187 - 211.
  • 10. Felekoglu B., Tosun K., Baradan B., 2009, A comparative study on the flexural performance of plasma treated polypropylene fiber reinforced cementitious composites, J. Mat. Proc. Techn., 209, s. 5133-5144.
  • 11. Krassig H. A., Lenz J., Mark H. F, 1984, Fiber Technology: From Film to Fiber, Marcel Decker Inc.
  • 12. Polovikhina L. A, Zverev M. P, Shimko I. G., 1973, Production and utilization of new fibre types, Fibre Chemistry, 4, s. 418 -422.
  • 13. Zverev M. P., Pankov S. P., 1984. Theory of the preparation of fibrillated polypropylene film materials. Fibre Chemistry, 16. No. 2, s. 86-89.
  • 14. Przybyło S., Broda J., 2011, Fibrylizowane włókna polipropylenowe do rozproszonego zbrojenia betonu, Nauka, Przyroda, Technologie, Tom 5, Zeszyt 4, 72.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS4-0001-0020
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.