PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Izolacja z nanokompozytów polimerowych w zastosowaniu do silników elektrycznych niskiego napięcia

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Insulation based on polymer nanocomposites in application to low-voltage electrical motors
Języki publikacji
PL
Abstrakty
PL
Celem pracy było przedstawienie propozycji rozwiązania problemu dotyczącego izolacji silników niskonapięciowych zasilanych z przekształtników przy zastosowaniu nanokompozytów polimerowych. W pracy dokonano przeglądu materiałów stosowanych w układzie izolacyjnym silników niskiego napięcia i opisano problemy związane z izolacją międzyzwojową w silnikach elektrycznych zasilanych przekształtnikami, a także aktualnie stosowane sposoby ich rozwiązania. Przedstawiono również rys historyczny dotyczący rozwoju silników elektrycznych, materiałów elektroizolacyjnych opartych na materiałach organicznych, izolacji w silnikach niskiego napięcia oraz energoelektroniki. Opisano rodzaje nanokompozytów polimerowych, sposoby ich wytwarzania i właściwości, a także obecne i perspektywiczne zastosowania, w szczególności możliwości uzyskania odpowiednich materiałów elektroizolacyjnych. Zaprezentowano wyniki badań własnych odporności konwencjonalnych przewodów emaliowanych na narażenia, jakie stwarza zasilanie przekształtnikami PWM, stosowane sposoby wytwarzania nanokompozytowych lakierów na przewody emaliowane - NLPE, jak również właściwości NLPE wytworzonych metodą opracowaną przy współudziale autorki. Przedstawiono i omówiono wyniki wieloletnich badań prowadzonych przez autorkę w dziedzinie nanokompozytowych lakierów nasycających - NLN. W podsumowaniu stwierdzono, że nanokompozytowe lakiery NLPE oraz NLN, wchodzące w skład izolacji międzyzwojowej, charakteryzują się lepszymi właściwościami od lakierów konwencjonalnych. Dotyczy to zwłaszcza wielokrotnie większej odporności na wyładowania niezupełne występujące przy zasilaniu napięciem impulsowym z przekształtnika. Stwierdzono, że poprawę wielu właściwości lakierów nanokompozytowych można wyjaśnić za pomocą właściwości barierowych. Zaproponowano również metody analizy właściwości nanokompozytów polimerowych. Zastosowanie nanokompozytów polimerowych w silnikach niskiego napięcia zasilanych z przekształtników powinno przyczynić się do zwiększenia ich trwałości i w przyszłości pozwoli na uniknięcie denominacji parametrów znamionowych silników.
EN
The purpose of this work was presentation the proposition of solving a problem concern in the insulation of low-voltage motors driven by inverters with application of polymer nanocomposites. The work comprises the survey of insulating materials used in a low-voltage insulating system and description of problems with turn-to-turn insulation in inverter-driven motors, as well as current methods of solving them. Historical outline of the development of electrical motors, electroinsulating material based on organic materials, insulation of low-voltage motors and power electronic are also presented. Types and properties of polymer nanocomposites, methods of their production as well the present and future applications (in particular electroinsulating materials) have been described. The results of the own investigation of the conventional enamelled wires resistance to stresses induced by the PWM inverters have been presented. Moreover, the methods of obtaining NLPE nanocomposited enamels for winding wires have been used. The aforementioned method was developed with the participation of the author. The results of many years of author investigations in the domain of NLN nanocomposited impregnating varnishes are shown and discussed. It was stated in summary that NLPE and NLN varnishes, that create turn-to-turn insulation, show better properties in comparison to conventional varnishes. It concerns especially to the multiple higher resistance to partial discharges that appear under inventer pulse voltage. It was shown that the improvement of many properties in nanocomposites can be explained through the barrier properties. Methods of analysis of polymer nanocomposites properties have been also proposed. Application of polymer nanocomposites in inverter-driven low-voltage motors should contribute to increase of their durability. It will allow to avoid the denomination of parameters of the electrical motors in the future.
Rocznik
Tom
Strony
1--136
Opis fizyczny
Bibliogr. 311 poz., tab., rys.
Twórcy
autor
  • Politechnika Wrocławska
Bibliografia
  • 1. Alen S.A., Edge M., Ortega A., Sandoval G., Liauw C. M., Verran J., Stratton J., McIntyre R. B.: Degradation and stabilisation of polymers and coatings: nano versus pigmentary titania particles. Polymer Degradation and Stability, 85, 3, 927-946, 2004.
  • 2. Allegra G., Raos G., Vacatello M.: Theories and simulations of polymer-based nanocomposites: From chain statistics to reinforcement. Progress in Polymer Science 33, 683-731, 2008.
  • 3. Bao L., Todaka K., Yamaura I., Pan Z., Amino N., Kemmochi K.: Relationship between strain and electrical resistivity of vulcanized rubber filled with carbon nanofiber. The Open Materials Science Journal, 1, 13-17, 2007.
  • 4. Barber P., Balasubramanian S., Anguchamy Y., Gong S., Wibowo A., Gao H., Ploehn H.J., Zur Loye H.C.: Review. Polymer composite and nanocomposite dielectric materials for pulse power energy storage. Materials, 2, 1697-1733, 2009.
  • 5. Battistella M., Cascione M., Fiedler B., Wichmann M.H.G., Quaresimin M., Schulte K.: Fracture behaviour of fumed silica/epoxy nanocomposites. Composites: A, 39, 1851-1858, 2008.
  • 6. Beeckman R.J., Harber J.J., Wentz S.J.: Studies on magnet wire degradation with inwerter driven motors. Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Conference. Proceedings, 383-87, 2007.
  • 7. Berglund L.A.: Rheology of polimer nanocomposites – are there unique effects for exploitation? Annual Transaction of the Nordic Rheology Society, 14, 33-36, 2006.
  • 8. Bogh D., Coffee J., Stone, G., Custodio, J.: Partial discharge inception testing on low voltage motors. IEEE Transactions on Industry Applications, 148-154, 2006.
  • 9. Bohm F.R., Nagel K., Schindler H.: A new generation of wire enamel for the production of magnet wires with outstanding corona resistance. Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, Proceedings, 109-113, 2003
  • 10. Bonnett A.H., Rhodes D.J.: PWM inverter and motor applications: A quick reference of bibliographies and abstracts. IEEE Transactions on Industry Applications. 34, 1, 217-221, 1998.
  • 11. Bonnett, A.H.: A comparison between insulation systems available for PWM-inverter-fed motors. Industry Applications, 33, 5, 1331-1341, 1995.
  • 12. Bonnett, A.H., Soukup, G.C.: Cause and analysis of stator and rotor failures in three-phase squirrelcage induction motors, Industry Applications, IEEE Transactions on, 28, 4, 921-937, 1992.
  • 13. Brudkowska B.: Krajowe lakiery elektroizolacyjne – stan aktualny oraz przewidywane kierunki rozwoju. Wiadomości Elektrotechniczne, 3-4, 56-59, 1986.
  • 14. Brudkowska B., Nieroda B.: Wyroby lakierowe elektroizolacyjne. Biuro Wydawnicze „Chemia”, Warszawa, 1977
  • 15. Brzoza-Brzezina K.: Rozwój rynku elektrycznych silników energooszczędnych widziany z perspektywy realizacji programu PEMP. Zeszyty Problemowe – Maszyny Elektryczne, 78, 1-6, 2007.
  • 16. Cai L. F., Mai Y. L., Rong M. Z., Ruan W. H., Zhang M. Q.: Interfacial effects in nanosilica/ polypropylene composites fabricated by in-situ chemical blowing. Express Polymer Letters, 1, 1, 2-7, 2007.
  • 17. Camargo P.H.C., Satyanarayana K.G., Wypych F.: Nanocomposites: synthesis, structure, properties and new application opportunities. Materials Research, 12, 1, 1-39, 2009.
  • 18. Cao Y., Irwin P.C., Younsi K.: The future of nanodielectrics in the electrical power industry. IEEE Transactions on Dielectrics and Electrical Insulation, 11, 5, 797-807, 2004.
  • 19. Casale M.L., Schifani R., Testa L., Montanari G.C., Motori A., Patuelli F., Guastavino F., Deorsola F.: Partial discharge tests using CIGRE method II upon nanocomposite epoxy resins, International Conference on Solid Dielectrics, Winchester, UK, 8-13.07.2007, 341-344, 2007.
  • 20. Caseri W.: Nanocomposites of Polymers and Inorganic Particles. Encyclopedia of Nanoscience and Nanotechnology, H. S. Nalwa (edytor), 6, 235-247, 2004.
  • 21. Chang C.-M., Chang C.-C.: Preparation and characterization of polyimide-nanogold nanocomposites from 3-mercaptopropyltrimethoxysilane encapsulated gold nanoparticles. Polymer Degradation and Stability, 93, 109-116, 2008.
  • 22. Chen G., Zhang C., Stevens G.: Space charge in LLDPE loaded with nanoparticles. Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2007, 275- 278, 2007.
  • 23. Chen Q., Chasiotis I., Chen C., Roy A.: Nanoscale and effective mechanical behavior and fracture of silica nanocomposites. Composites Science and Technology, 68, 3137-3144, 2008.
  • 24. Chen Y., Zhou S., Chen G., Wu L.: Preparation and characterization of polyester/silica nanocomposite resins. Progress in Organic Coatings, 54, 120-126, 2005.
  • 25. Chen Y., Zhou S., Yang H., Gu G., Wu L.: Preparation and characterization of nanocomposite polyurethane. J. Colloid Interface Sci., 279, 370-378, 2004.
  • 26. Cheng L., Zheng L., Li G., Zeng J., Yin Q.: Influence of particle surface properties on the dielectric behavior of silica/epoxy nanocomposites. Physica B: Physics of Condensed Matter, 403, 17, 2584-2589, 2008.
  • 27. Choi W. F., Cheng E., Wong P.: Voltage and pulse endurance test of new generation wire CORONA-RTM developed by P. Leo, 2nd International Conference on Power Electronics Systems and Applications, 40-44, 2006.
  • 28. Chrissafis K., Paraskevopoulos K.M., Pavlidou E., Bikiaris D.: Thermal degradation mechanism of HDPE nanocomposites containing fumed silica nanoparticles. Thermochimica Acta, 485, 65-71, 2009.
  • 29. Ciuprina F., Plesa I., Notingher P. V., Tudorache T.: Dielectric properties of nanodielectrics with inorganic fillers. Annual Report Conference on Electrical Insulation Dielectric Phenomena, 682-685, 2008.
  • 30. Coleman J. N., Khan U., Blau W.J., Gun’ko Y.K.: Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites. Carbon, 44, 1624-1652, 2006.
  • 31. Damm Z.: Doświadczenia Grupy Cantoni w zakresie silników energooszczędnych. Zeszyty Problemowe – Maszyny Elektryczne, 73, 2005.z
  • 32. Dan C.H., Lee M.H., Kim Y.D., Min B.H., Kim J. H.: Effect of clay modifiers on the morphology and physical properties of thermoplastic polyurethane/clay nanocomposites. Polymer, 47, 19, 6718-6730, 2006.
  • 33. Das R.N., Egitto F.D., Lauffer J.M., Markovich V.R.: Laser micromachining of nanocomposite-based flexible embedded capacitors, 57th IEEE Electronic Components and Technology Conference. ECTC '07. Proceedings, 435 - 441, 2007.
  • 34. Dąbrowski M., Rudenski A.: Oprogramowanie do projektowania silników indukcyjnych wysokoobrotowych. Zeszyty Problemowe – Maszyny Elektryczne 80, 141-145, 2008.
  • 35. Ding C., Jia D., He H., Guo B., Hong H.: How organo-montmorillonite truly affects the structure and properties of polypropylene. Polymer Testing, 24, 94-100, 2005.
  • 36. Dodiuk, H., Belinski, I., Dotan, A., Kenig, S.: Polyurethane adhesives contained functionalized nanoclays: Journal of Adhesion Science and Technology, 20, 1345-1355, 2006.
  • 37. Drexler K.E., Engines of Creation: The coming era of nanotechnology. New York, Anchor Books, Doubleday, 1986.
  • 38. Duarte P., Edgar A.: Magnetic wire with corona-resistant coating, Patent nr US20100181094, 2010.
  • 39. Esposito Corcione C., Frigione M., Maffezzoli A., Malucelli G.: Photo – DSC and real time – FT-IR kinetic study of a UV curable epoxy resin containing o-Boehmites. European Polymer Journal, 44, 2010-2023, 2008.
  • 40. Fabiani D., Montanari G.C., Cavallini A., Mazzanti G.: Relation between space charge accumulation and partial discharge activity in enameled wires under PWM-like voltage waveforms, IEEE Transactions on Dielectrics and Electrical Insulation, 11, 3, 393-405, 2004.
  • 41. Fabiani D., Montanari G.C., Contin A.: Aging Acceleration of Insulating Materials for Electrical Machine Windings Supplied by PWM in the Presence and in the Absence of Partial Discharges. Conference Record of the 2001 IEEE 7th International Conference on Solid Dielectrics, 283-286, 2001.
  • 42. Fatih M. Erguney, Heng Lin, Wayne L. Mattice: Dimensions of matrix chains in polymers filled with energetically neutral nanoparticles. Polymer, 47, 10, 3689-3695, 2006.
  • 43. Feller J.F., Bruzaud S., Grohens Y.: Influence of clay nanofiller on electrical and rheological properties of conductive polymer composite. Materials Letters, 58, 739-745, 2004.
  • 44. Florjańczyk Z., Dębowski M., Chwojnowska E., Łokaj K., Ostrowska J.: Polimery syntetyczne i naturalne w nowoczesnych materiałach polimerowych. Cz. I -Polimery z surowców odnawialnych i nanokompozyty polimerowe. Polimery, 54, 10, 611-625, 2009.
  • 45. Fothergill J.C., See K.B.A., Ajour M.N., Dissado L.A.: “Sub-Hertz” dielectric spectroscopy. IEEE Proceedings of 2005 lnternational Symposium on Electrical Insulating, 821-824, 2005.
  • 46. Fragiadakis D., Pissis P., Bokobza L.: Modified chain dynamics in poly(dimethylsiloxane)/silica nanocomposites. J.. Non-Cryst. Sol., 352, 4969-4972, 2006.
  • 47. Fragiadakis D., Pissis P.: Glass transition and segmental dynamics in poly(dimethylsiloxane)/silica nanocomposites studied by various techniques. J. Non-Cryst. Sol., 353, 4344-4352, 2007.
  • 48. Fu S., Feng X., Lauke B., Mai Y.: Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Composites Part B, 39, 6, 933-961, 2008.
  • 49. Gacitua W.E., Ballerini A.A., Zhang J.: Polymer nanocomposites: synthetic and natural fillers. A review. Maderas, Ciencia y tecnologia, 7, 3, 159-178, 2005..
  • 50. Garcia M., van Vliet G., Jain S., Schrauwen B. A. G., Sarkissov A., van Zyl W.E., Boukamp B.: Polypropylene/SiO2 nanocomposites with improved mechanical properties. Reviev on Advanced Materials Science, 6, 169-175, 2004
  • 51. Gaur M.S., Shukla P., Saxena P.: Thermally stimulated discharge current and di electric spectroscopy of polyvinylidenefluoride – zinc oxide nanocomposite. 13th International Symposium on Electrets ISE-13, 2008.
  • 52. Gąsiorowski T.: Nowe serie silników energooszczędnych "SEE" i "Sh", Efektywność energetyczna napędów z silnikami elektrycznymi: materiały konferencyjne. Zeszyty Problemowe – Maszyny Elektryczne, 63, 27-32, 2001.
  • 53. Gedde U.W.: Polymer Physics. Kluwer Academic Publisher, Netherlands, 1999.
  • 54. Gilman J. W., Jackson C.L., Morgan A.B., Harris R.H.Jr., Manias E., Giannelis E.P., Wuthenow M., Hilton D., Phillips S.H.: Flammability properties of polymer-layered-silicate nanocomposites, polypropylene and polystyrene nanocomposites. Chemistry of Materials, 12, 7, 1866-1873, 2000.
  • 55. Golebiewski J., Galeski A.: Thermal stability of nanoclay polypropylene composites by simultaneous DSC and TGA. Composites Science and Technology, 67, 3442-3447, 2007.
  • 56. Golombek A., Białkiewicz K: Niektóre elektryczne i mechaniczne właściwości silników asynchronicznych zasilanych z przemienników. Maszyny Elektryczne – Zeszyty Problemowe, 54, 69-76, 1997.
  • 57. Gołębiewski, J.: Nanokompozyty polimerowe. Struktura, metody wytwarzania i właściwości Przemysł Chemiczny, 83, 1, 15-20, 2004.
  • 58. Gornicka B., Mazur M., Sieradzka K., Prociow E., Lapinski M.: Antistatic Properties of Nanofilled Coatings. Acta Physica Polonica A, 117, 5, 869-872, 2010.
  • 59. Gornicka B., Sieradzka K., Domaradzki J., Lapinski M.: Electrical properties of polimer coatings modified with nanoadditives. IEEE International Students and Young Scientists Workshop Photonics and Microsystems, 25-27.06.2009, Wernigerode, Niemcy, 21-24, 2009.
  • 60. Gornicka B., Sieradzka K.: Characterization of impregnating varnish with silica nanofiller. 2010 International Students and Young Scientists Workshop „Photonics and Microsystems”, 21-24, 2010.
  • 61. Gornicka B., Prociow K.: Insulating System of Inverter-Driven Motors Based on Nanocomposites. Materials and Manufacturing Processes, 24, 10/11, 1202-1206, 2009.
  • 62. Górecki L., Górnicka B.: Degradacja izolacji międzyzwojowej silników pod wpływem narażeń pochodzących od przekształtników. IV Konferencja Naukowa Postępy, Jamrozowa Polana 2000, Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej, seria Konferencje, 37, 12, 37-40, 2000.
  • 63. Górecki L., Górnicka B., Zawadzka J., Czołowska B.: Badania nad modyfikacją przewodu emaliowanego przeznaczonego do pracy w układach izolacyjnych silnika indukcyjnego zasilanego z przemiennika częstotliwości. Konferencja Problemy Eksploatacji Maszyn i Napędów Elektrycznych PEMINE’06, Maszyny Elektryczne – Zeszyty Problemowe, 74, 41-44, 2006.
  • 64. Górecki L., Mielcarek W., Górnicka B. Prociów K.: Erozja polimerowej izolacji międzyzwojowej silników nn. pod wpływem wyładowań niezupełnych. IV Konferencja Naukowa Postępy, Jamrozowa Polana 2000, Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej, seria Konferencje, 37/12, 41-46, 2000.
  • 65. Górnicka B.: Nowoczesne materiały izolacyjne/impregnacyjne stosowane w silnikach indukcyjnych zasilanych z przekształtników. Energetyka Cieplna i Zawodowa, 5, 57-59, 2009.
  • 66. Górnicka B., Czołowska B., Górecki L.: Zgłoszenie patentowe nr P 390759, Sposób modyfikacji elektroizolacyjnego lakieru nasycającego, zwłaszcza poliestroimidowego, 2010.
  • 67. Górnicka B., Czołowska B., Mazurek B., Zawadzka J., Górecki L.: Varnises modified with nanoparticles for use in electrical insulation. Polimery, 52, 5, 47-50, 2007.
  • 68. Górnicka B., Czołowska B., Zawadzka J., Górecki L.: Modyfikacja lakierów nasycających nanokrzemionką. IX Forum Techniczne: Problemy Wytwarzania Małych Maszyn Elektrycznych, 23-25.05.2005 Września, 1-9, 2005.
  • 69. Górnicka B., Górecki L., Czołowska B., Zawadzka J.: Określenie napięcia zapłonu wyładowań koronowych izolacji międzyzwojowej przy zasilaniu napięciem impulsowym. Konferencja Problemy Eksploatacji Maszyn i Napędów Elektrycznych PEMINE ’05, Maszyny Elektryczne – Zeszyty Problemowe, 72, 29-32, 2005.
  • 70. Górnicka B., Górecki L., Czołowska B., Zawadzka J.: Wpływ starzenia cieplnego na występowanie wyładowań niezupełnych w izolacji międzyzwojowej silników zasilanych z przemienników częstotliwości. Konferencja Problemy Eksploatacji Maszyn i Napędów Elektrycznych PEMINE, Ustroń 2002, Materiały Konferencyjne – Zeszyty Problemowe Maszyny Elektryczne, 64, 31-36, 2002.
  • 71. Górnicka B., Górecki L., Sieradzka K.: Ocena właściwości mechanicznych i cieplnych nanokompozytowych lakierów przy zastosowaniu skomputeryzowanych metod. XVII Krajowa Konferencja KOWBAN’2010, 22-24.10.2010, Szklarska Poręba, Prace Wrocławskiego Towarzystwa Naukowego Seria B nr 216, Wrocław, 35-39, 2010.
  • 72. Górnicka B., Górecki L., Zawadzka J., Czołowska B.: Nowy przewód emaliowany o zwiększonej trwałości napięciowej opracowany w oparciu o nanotechnologię. VI Konferencja Naukowa Postępy w Elektrotechnologii, 2006, Jamrozowa Polana, Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej, seria Konferencje, 44/18, 335-336, 2006.
  • 73. Górnicka B., Górecki L., Zawadzka J., Czołowska B.: Trwałość izolacji międzyzwojowej przy oddziaływaniu napięcia impulsowego oraz temperatury. V Konferencja Naukowa Postępy w Elektrotechnologii, Jamrozowa Polana 2003, Prace Naukowe Instytutu Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej, seria Konferencje, 38/13, 165-168, 2003.
  • 74. Górnicka B., Górecki L.: Method of assessment of varnishes modified with nanofillers. Material Science-Poland. 27/4/2, 1237-1242, 2009.
  • 75. Górnicka B., Górecki L.: Badania wpływu zależności trwałości oraz napięcia zapłonu wyładowań niezupełnych izolacji przy napięciu impulsowym od jej wymiarów. Zeszyty Problemowe – Maszyny Elektryczne, 81, 67-71, 2009.
  • 76. Górnicka B., Górecki L.: Badanie wpływu narażeń pochodzących od przekształtników na trwałość izolacji międzyzwojowej. Przegląd Elektrotechniki, 3, 65-67, 2001.
  • 77. Górnicka B., Górecki L.: Charakterystyka elektroizolacyjnego lakieru nasycającego o ulepszonych właściwościach. Konferencja PEMINE 2010, Maszyny Elektryczne – Zeszyty Problemowe, 86, 241-246, 2010.
  • 78. Górnicka B., Górecki L.: Degradation of winding insulation due to power electronics devices In induction motors. Przegląd Elektrotechniczny APTADM’01– Zeszyt Specjalny, 349-351, 2001.
  • 79. Górnicka B., Górecki L.: Narażenia izolacji międzyzwojowej w silnikach elektrycznych sterowanych przekształtnikami. KOMEL, Maszyny Elektryczne, 58, 75-79, 1999.
  • 80. Górnicka B., Mazur M.: Zautomatyzowane pomiary właściwości antystatycznych nanokompozytowych powłok. XVII Krajowa Konferencja KOWBAN’08, 22-24.10.2010, Szklarska Poręba. Prace Wrocławskiego Towarzystwa Naukowego Seria B nr 216, Wrocław, 41-48, 2010.
  • 81. Górnicka B., Moroń L., Żyłka P., Wojcieszak D.: Skomputeryzowane stanowisko do pomiarów prądów termostymulowanych TSD – badania nanokompozytowych lakierów elektroizolacyjnych. XVII Krajowa Konferencja KOWBAN’08, 22-24.10.2010, Szklarska Poręba. Prace Wrocławskiego Towarzystwa Naukowego Seria B nr 216, Wrocław, 49-55, 2010.
  • 82. Górnicka B., Prociów E.: Polyester and polyesterimide compounds with nanofillers for impregnating of electrical motor. Acta Physica Polonica, 115, 4, 842-845, 2009.
  • 83. Górnicka B., Prociów K.: Nanofilled impregnating varnish for inverter driven motors. XXXI Internatizonal Convention MIPRO 2008, 26-30.05.2008 Opatija, Croatia, Proceedings of Conferences: Microelectronics, Electronics and Electronic Technology/MEET Grid and Visualizations Systems/GVS, 70-72, 2008.
  • 84. Górnicka B., Sieradzka K.: Barrier properties of impregnating varnishes with nanosilica. 2nd National Conference on Nanotechnology ‘NANO 2008’. J. Phys.: Conference Series, 146, 2009, 1-4, 2009.
  • 85. Górnicka B., Sikora A., Wojcieszak D.: Surface morphology study and dielectric properties of polyesterimide nanocomposite. Elektronika, 66-68, 2011.
  • 86. Górnicka B., Wojcieszak D.: Nanocomposites for turn insulation for inverter fed motors. 31st International Spring Seminar on Electronics technology, XXXI International Spring Seminar on Electronics Technology, ISSE ’08, 7-11.05.2008, Budapeszt, 165-168, 2008.
  • 87. Górnicka B., Zawadzka J., Mazurek Bolesław, Górecki L., Czołowska B.: Nanofiller – modified varnishes for electrical insulation. Materials Science, 20, 4, 85-91, 2002.
  • 88. Gross S., Camozzo D., Di Noto V., Armelao L., Tondello E.: PMMA: A key macromolecular component for dielectric low-κ hybrid inorganic–organic polymer films. European Polymer Journal, 43, 673-696, 2007.
  • 89. Guastavino F., Balbo M., Coletti G., Zunino F., Oldrati A.: Characterization of nanofilled epoxy varnish subjected to surface partial discharges. IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 267-270, 2007.
  • 90. Guastavino F., Coletti G., Dardano A., Torello E.: Life tests on twisted pairs subjected to PWM-like voltages, IEEE International Conference on Solid Dielectrics, Toulouse, France, 5-9.07.2004, 860-864, 2004.
  • 91. Gun’ko V.M., Pissis P., Spanoudaki A., Turova A.A., Turov V.V., Zarko V.I., Goncharuk E.V.: Interfacial phenomena in starch/fumed silica at varied hydration levels. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 320, 247-259, 2008.
  • 92. Guo J., Shu W., Zhan L., Zhang L., Zhang X., Wu G.: New tools to determine the partial discharges of inverter fed motor. Proceedings of the 2004 IEEE International Conference on Solid Dielectrics ICSD 2004, 2, 868-871, 2004.
  • 93. Guz I.A., Rodger A.A., Guz A.N., Rushchitsky J.J.: Developing the mechanical models for nanomaterials. Composites: Part A, 38, 4, 1234-1250, 2007.
  • 94. Guz N., Rushchitsky J.J., Guz I.A., Establishing fundamentals of the mechanics of nanocomposites. International Applied Mechanics, 43, 3, 247-271, 2007.
  • 95. Haneman T.: Influence of dispersants on the flow behavior of unsaturated polyester-alumina composites, Composites: Part A 37, 2006, 735-741
  • 96. Haq S.U., Jayaram S.H., Cherney E.A.: Performance of nanofillers in medium voltage magnet wire insulation under high frequency applications. IEEE Transactions, 14, 2, 407-426, 2007.
  • 97. Haq S.U., Jayaram S.H., Cherney E.A., Raju G.G.: Space charge analysis in enamelled wires by Rusing thermally stimulated depolarization current (TSDC). Journal of Electrostatics, 67, 12-17, 2009.
  • 98. Haq S.U., Jayaram S.H., Cherney E.A., Simon L. C.: Partial discharge erosion of nanofilled enameled wires subjected to high frequency waveforms. Conference Record of the 2006 IEEE International Symposium on Electrical Insulation, 396-399, 2006.
  • 99. Hayase Y., Tanaka Y., Takada T., Murata Y., Sekiguchi Y., Reddy C.C.: Space charge suppression effect of nano-size fillers added to polymeric materials. Journal of Physics: Conference Series, 183, 1-7, 2009.
  • 100. Herrera-Alonso J.M., Marand E., Little J.C., Cox S.S.: Transport properties in polyurethane/Clay nanocomposites as barrier materials: Effect of processing conditions. Journal of Membrane Science. 337, 208-214, 2009.
  • 101. Hong J. I., Winberg P., Schadler L. S., Siegel R. W.: Dielectric properties of zinc oxide/low density polyethylene nanocomposites. Materials Letters, 59, 473-476, 2005.
  • 102. Hrach R., Novak S., Svec M.: Correlation between morphology and transport properties of composite films: Charge transport in composites. Applied Surface Science, 252, 5516-5520, 2006.
  • 103. http://alexandria.tue.nl/extra2/200712433.pdf.
  • 104. http://catalogo.weg.com.br/files/wegnet/WEG-induction-motors-fed-by-pwm-frequencyconverters- technical-guide-028-technical-article-english.pdf
  • 105. http://encyklopedia.pwn.pl
  • 106. http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:C:2006:185:0001:0009:PL:PDF
  • 107. http://ia700303.us.archive.org/4/items/experimentalres00faragoog/experimentalres00faragoog.pdf
  • 108. http://www.intechopen.com/books/show/title/advances-in-nanocomposites-synthesischaracterization- and-industrial-applications
  • 109. http://proceedings.europeanmixing13.org/data/Ozcan-Taskin_and_Padron.pdf
  • 110. http://rop.sejm.gov.pl/1_0ld/posiedzenia/pdf/0519706.pdf
  • 111. http://shared.a2zinventory.com/mfg/LincolnMotors/Library/tb-100.pdf
  • 112. http://www.ab.com/support/abdrives/documentation/fb/1022.pdf
  • 113. http://www.calpoly.edu/~rhfernan/Nano%20Seminar/Nano_Coat_Seminar.pdf
  • 114. http://www.centrum.pemp.pl/dokumenty/biblioteka/sz/2/silniki_energooszczedne.pdf
  • 115. http://www.centrum.pemp.pl/dokumenty/eco/eco7
  • 116. http://www.emt-india.net/Presentations2009/3L_2009Jun25_IT/Material/05-Japan%20Semiconductor%20Industry%20Contribution%20to%20Saving%20Energy.ppt
  • 117. http://www.freepatentsonline.com/4546041.pdf
  • 118. http://www.ftj.agh.edu.pl/doc/pl/dyd/FMMwyklad.pdf
  • 119. http://www.marwie.net.pl/Do%20Pobrania/Download/podstawy_energoelektroniki.pdf
  • 120. http://www.mindfully.org/Plastic/Plastics-History.htm
  • 121. http://www.mpoweruk.com/history.htm
  • 122. http://www.napolynet.eu/UserFiles/File/Duraccio_Napolynet.pdf
  • 123. http://www.portal.pemp.pl/biblioteka/roboczy/PEMP_seria_wydawnicza_1.pdf
  • 124. http://www.rsc.org/ebooks/archive/free/BK9780854042166/BK9780854042166-00001.pdf
  • 125. http://www.sea.siemens.com/us/internetdms/ dt/ElectricMotorsComm/ElectricMotors/Docs/NEMA%20Application%20Guide%20fo r%20AC%20Adjustable%20Speed%20Drive%20Systems.pdf
  • 126. http://www.umass.edu/nano/NewFiles/FN14_RPI.pdf
  • 127. http://www.vonroll.ch/downloads/ANWWIDM.pdf
  • 128. http://www.vonroll.com/downloads/ANISIDM.pdf
  • 129. http://www2.dupont.com/Electrical_Insulation_Systems/en_DE/assets/downloads/datasheets/ Voltron-E3598-english.PDF
  • 130. Hu T., Juuti J., Jantunen H., Vilkman T.: Dielectric properties of BST/polymer composite. Journal of the European Ceramic Society, 27, 3997-4001, 2007.
  • 131. Hu Y., Smith R.C., Nelson J.K., Schadler L.S.: Some mechanistic understanding of the impulse strength of nanocomposites. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 15-18.10.2006, 31-34, 2006.
  • 132. Huang J., He C., Liu X., Xu J., Tay Ch.S.S., Chow S.Y.: Organic–inorganic nanocomposites from cubic silsesquioxane epoxides: direct characterization of interphase, and thermomechanical properties. Polymer, 46, 7018-7027, 2005.
  • 133. Huang X., Jiang P., Kim C., Ke Q., Wang G.: Preparation, microstructure and properties of polyethylene aluminum nanocomposite dielectrics. Composites Science and Technology, 68, 2134-2140, 2008.
  • 134. Hub Ch., Harton S.E., Hunt M.A., Fink R, Ade H.: Influence of sample preparation and processing on observed glass transition temperatures of polymer nanocomposites. Journal of Polymer Science Part B: Polymer Physics, 45, 16, 2270-2276, 2007.
  • 135. Hughes A.: Electric motors and drives: fundamentals, types and applications, Third edition, Elselvier, 2006.
  • 136. Hussain F.: Review article: Polymer-matrix nanocomposites, processing, manufacturing and application: An Overview. Journal of Composite Materials, 40, 17, 1511-1575, 2006.
  • 137. Iizuka T., Tanaka T.: Effects of nano silica filler size on treeing breakdown lifetime of epoxy nanocomposites. Proc. of the 9th International Conference on Properties and Applications of Dielectric Materials, 733-736,
  • 138. Imai T., Sawa F., Yoshimitsu T., Ozaki T., Shimizu T., Yokohama T.-ku, Fuchu-shi F.: Preparation and insulation properties of epoxy-layered silicate nanocomposite. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 402-405, 2004.
  • 139. Inuzuka K., Inano H., Hayakawa N., Hirose T., Hamaguchi M., Okubo H.: Partial Discharge Characteristics of Nanocomposite Enameled Wire for Inverter-Fed Motor. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 594-597, 2006.
  • 140. Ito T., Tomizawa K., Obika R.: Insulation wire, Patent nr JP2008257925, 2008.
  • 141. Jancar J., Douglas J.F., Starr F.W., Kumar S.K., Cassagnau P., Lesser A.J., Sternstein S.S., Buehler M.J.: Current issues in research on structure-property relationships in polimer nanocomposites. Polymer, 51, 3321-3343, 2010.
  • 142. Jang C.M., Liu R. S., Du C.T., Huang T.S., Tu Y.C., Liu W.H., Wu W.C., Lin T.H.: Pulsed voltage surge resistant enamelled wires. Patent nr US6190770, 2001.
  • 143. Jaszczuk W.: Czy mikrosilniki są rzeczywiście mikro?. Nowa Elektrotechnika, 10, 26, 2006.
  • 144. Johnsen B.B., Kinloch A.J., Mohammed R.D., Taylor A.C., Sprenger S.: Toughening mechanisms of nanoparticle-modified epoxy polymers. Polymer, 48, 530-541, 2007.
  • 145. Juchniewicz J., Lisiecki J.: Wysokonapięciowe układy izolacyjne. Wydawnictwa Politechniki Wrocławskiej, Wrocław, 1981.
  • 146. Kacperski M.: Nanokompozyty polimerowe. Kompozyty (Composites), 3, 7, 225-231, 2003.
  • 147. Kacprzyk R.: Wybrane zagadnienia badań ładunku i jego zaniku w dielektrykach stałych. Prace Naukowe Instytutu Podstaw Elektrotechniki i Elektrotechnologii Politechniki Wrocławskiej nr 41, Seria: Monografie nr 14. Oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław, 68-92, 2004.
  • 148. Kanapitsas A., Pissis P., Kotsilkova R.: Dielectric studies of molecular mobility and chase morphology in polymer–layered silicate nanocomposites, Journal of Non-Crystalline Solids, 305, 204-211, 2002.
  • 149. Kashiwagi T., Morgan A.B., Antonucci J.M., VanLandingham M.R., Harris Jr. R.H., Awad W.H., Shields J.R.: Thermal and flammability properties of a silica–poly(methylmethacrylate) nanocomposite. Journal of Applied Polymer Science, 89, 8, 2072-2078, 2003.
  • 150. Kaufhold M., Borner G., Eberhardt M., Speck I.: Failure mechanism of the interturn insulation of low voltage electric machines fed by pulse-controlled inverters. Electrical Insulation Magazine, IEEE, 12, 9 -16, 1996.
  • 151. Kickelbick G.: Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale. Progress in Polymer Science. 28, 83-114, 2008.
  • 152. Kikuchi H., Yukimori Y.: Partial-discharge-resistant insulating varnish, insulated wire and method of making the same. Patent nr US20060240254, 2006.
  • 153. Kim J., Lee K., Lee K., Bae J., Yang J., Hong S.: Studies on the thermal stabilization enhancement of ABS; synergistic effect of triphenyl phosphate nanocomposite,epoxy resin, and silane coupling agent mixtures. Polymer Degradation and Stability, 79, 201-207, 2003.
  • 154. Kim B.K., Seo J.W., Jeong H.M.: Properties of waterborne polyurethane/nanosilica composite. Macromolecular Research, 11, 3, 198-201 2003.
  • 155. Kirkici H., Serkan M., Koppisetty K.: Nano-dielectric materials in electrical insulation application. 31st Annual Conference of IEEE Industrial Electronics Society, IECON 2005, 2395-2399, 2005.
  • 156. Koczara W.: Wpływ energoelektroniki na rozwój techniki oraz na energooszczędne wytwarzanie i użytkowanie energii elektrycznej. Spektrum, 9, 17-21, 2008.
  • 157. Kowalczyk K., Spychaj T.: Powłoki epoksydowe modyfikowane nanocząstkami z farb wodorozcieńczalnych. Kompozyty (Composites), 5, 2, 3-6, 2005.
  • 158. Kozako M., Yamano S., Kido R., Ohki Y., Kohtoh M., Okabe S., Tanaka T.: Preparation and preliminary characteristic evaluation of epoxy/alumina nanocomposites. Proceedings of 2005 International Symposium on Electrical Insulating Materials ISEIM 2005, 231-234, 2005.
  • 159. Królikowski W., Rosłaniec Z.: Nanokompozyty polimerowe. Kompozyty (Composites), 4, 9, 3-16, 2004.
  • 160. Kuchibhatla S.V.N.T., Karakoti A.S., Bera D., Seal S.: One dimensional nanostructured materials. Progress in Materials Science, 52, 699-913, 2007.
  • 161. Kumar A.P., Depan D., Tomer N.S., Singh R.P.: Nanoscale particles for polimer degradation and stabilization-Trends and future perspectives. Progress in Polymer Science, 34, 479-515, 2009.
  • 162. Laachachi A., Ruch D., Addiego F., Ferriol M., Cochez M., Lopez-Cuesta J.-M.: Effect of ZnO and organo-modified montmorillonite on thermal degradation of poly(methyl methacrylate) nanocomposites. Polymer Degradation and Stability, 9, 670-678, 2009.
  • 163. Laoutid F., Bonnaud L., Alexandre M., Lopez-Cuesta J.-M., Dubois Ph.: New prospects In flame retardant polymer materials: From fundamentals to nanocomposites. Materials Science and Engineering, 63, 100-125, 2009.
  • 164. Lau K.Y., Piah M.A.M.: Polymer nanocomposites in high voltage electrical insulation perspective: A Review. Malaysian Polymer Journal, 6, 1, 58-69, 2011.
  • 165. Lee B.-W, Abothu I.R., Raj P.M., Yoon C.K., Tummala R.R.: Tailoring of temperature coefficient of capacitance (TCC) in nanocomposite capacitors. Scipta Materialia, 54, 7, 1231-1234, 2006.
  • 166. Leonard H.W.: Electrical Transmission of Power. Patent nr US 463,802, 1891.
  • 167. Leszczyńska A., Njuguna J., Pielichowski K., Banerjee J.R.: Polymer/montmorillonite nanocomposites with improved thermal properties. Part I. Factors influencing thermal stability and mechanisms of thermal stability improvement. Thermochimica Acta, 453, 2007, 75-96, 2007.
  • 168. Leszczyńska A., Njuguna J., Pielichowski K., Banerjee J.R.: Polymer/montmorillonite nanocomposites with improved thermal properties. Part II. Thermal stability of montmorillonite nanocomposites based on different polymeric matrixes. Thermochimica Acta, 454, 1-22, 2007.
  • 169. Lewis T.J.: Nanometric dielectrics. IEEE Transactions on Dielectrics and Electrical Insulation, 1, 5, 812-825, 1994.
  • 170. Li H., Liu G., Liu B., Chen W., Chen S. : Dielectric properties of polyimide/Al2O3 hybrids synthesized by in-situ polymerization. Materials Letters, 61, 7, 1507-1511, 2007
  • 171. Li Z., Okamoto K., Ohki Y., Tanaka T.: Role of nano-filler on partial discharge resistance and dielectric breakdown strength of micro-Al203 / epoxy composites. IEEE Proceedings of the 9th International Conference on Properties and Applications of Dielectric Materials, 753-756, 2009.
  • 172. Li L., Takahashi A., Hao J., Kikuchi R., Hayakawa T., Tsurumi T.-A., Kakimoto M.-A: Novel polymer-ceramic nanocomposite based on new concepts for embedded capacitor application (I). IEEE Transactions on Components and Packaging Technologies, 28, 4, 2005.
  • 173. Li Q., Xue Q., Hao L., Gao X., Zheng Q.: Large dielectric constant of the chemically functionalized carbon nanotube/polymer composites. Composites Science and Technology, 68, 2290-2296, 2008.
  • 174. Liang J., Wang Y., Huang Y., Ma Y., Liu Z., Cai J., Zhang C., Gao H., Chen Y.: Electromagnetic interference shielding of graphene/epoxy composites. Carbon 47, 922-925, 2009.
  • 175. Lienert K., Smidt L., Lehmann H.: Coating which is resistant to partial discharges, for enamelled wire. Patent nr US6337442, 2002.
  • 176. Lines, M.G.: Nanomaterials for practical functional uses. Journal of Alloys and Compounds, 449, 242-245, 2008.
  • 177. Ling A., Boggs S.A.: What is “Nano” in the context of a filled dielectric?: Conference Record of the 2006 IEEE International Symposium on Electrical Insulation, 273-276, 2006.
  • 178. Liu H., Brinson L.C.: Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites. Composites Science and Technology, 68, 1502-1512, 2008.
  • 179. Ma B., Gubanski S.M.: Dielectric properties and resistance to corona and ozone of epoxy compositions filled with micro- and nano-fillers. IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 672-677, 2009.
  • 180. Ma J.-Z., Hu J., Zhang Z.-J.: Polyacrylate/silica nanocomposite materials prepared by solgel process. European Polymer Journal, 43, 4169-4177, 2007.
  • 181. MacCrone R.K., Nelson J.K, Smith R.C., Schadler L.S.: The use of electron paramagnetic resonance in the probing of the nano-dielectric interface. IEEE Transactions on Dielectrics and Electrical Insulation, 15, 1, 197-204, 2008.
  • 182. Makuła K., Magryta J., Rosłaniec Z.: Właściwości i morfologia kompozytów elastomerowych zawierających nanowłokna węglowe, Elastomery, 9, 4, 3-9, 2005.
  • 183. Malesa M.: Nanonapełniacze kompozytów polimerowych, cz. I Krzemiany warstwowe. Elastomery, 8, 3, 12-17, 2004.
  • 184. Malesa M.: Nanonapełniacze kompozytów polimerowych, cz. II Krzemionka, Elastomery, 10, 2, 10-15, 2006.
  • 185. Man X., Jun-qiang F., Xiao-long C.: Conductive property of metal nano-particle/polimer composite dielectrics. Proceedings of 2008 International Symposium on Electrical Insulating, 83-86, 2008.
  • 186. Mary D., Malec D., Nguyen M.Q., Werynski P., Gornicka B., Therese L., Guillot Ph.: DC conduction current, dielectric strength and electroluminescence of standard, nanofilled and microfilled polyetherimide varnishes. IEEE Conference on Electrical Insulation And Dielectric Phenomena CEIDP, 18-23.10.2009, Virginia, 678-681, 2009.
  • 187. Mazurek B., Moron L.: Polarization spectra analysis for the investigation of space charge in dielectric nanocomposites. Materials Science-Poland, 25, 3, 899-911, 2007.
  • 188. Mazurek B., Moroń L., Zawadzka E.: Nanokompozyty polimerowe- struktura i właściwości dielektryczne. Przegląd Elektrotechniczny, 4, 80-83, 2008.
  • 189. Mbaye A., Lebey T.: Analytical approach of pd activity in low voltage motors fed by inverters. Proceedings of The 1998 IEEE 6th International Conference on Conduction and Breakdown in Solid Dielectrics ICSD'98, 161-164, 1998.
  • 190. Melfi, M. J.: Low-Voltage PWM inverter-fed motor insulation issues, IEEE Transactions on Industry Applications, 42, 1, 128-133, 2006.
  • 191. Meneghetti P., Qutubuddin S.: Synthesis, thermal properties and applications of polymerclay nanocomposites. Thermochimica Acta, 442, 74-77, 2006.
  • 192. Minelli M., Baschetti M.G., Doghieri F.: Analysis of modeling results for barrier properties in ordered nanocomposite systems. Journal of Membrane Science, 327, 208-215, 2009.
  • 193. Morshuis P.H.F.: Degradation of solid dielectrics due to Internal partial discharge: some thoughts on progress made and where to go now. IEEE Transactions on Dielectrics and Electrical Insulation, 12, 5, 905-913, 2005.
  • 194. Mosiński F.: Zagrożenia w układzie izolacyjnym silnika zasilanego z przekształtnika. Maszyny Elektryczne – Zeszyty Problemowe, 54, 36-42, 1997.
  • 195. Mościcka-Grzesiak H.: Inżynieria wysokich napięć w elektroenergetyce, tom II. Wydawnictwo Politechniki Poznańskiej, 1999
  • 196. Musiał E.: Zabezpieczanie silników zasilanych z pośrednich przemienników częstotliwości. Biul. SEP INPE, Informacje o normach i przepisach elektrycznych, 59-60, 3-35, 2004.
  • 197. Nelson J.K., Thiticharwnpong Y., Hu. J.: Electrical properties of TiO2 nanocomposites. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 719-722, 2003.
  • 198. Nelson J.K.: Overview of nanodielectrics: insulating materials of the future. Electrical Insulation Conference and Electrical Manufacturing Expo, nr 22-24, 229-235, 2007.
  • 199. Nelson J.K.: Dielectric Polymer Nanocomposites, 1st Edition, Spinger 2010.
  • 200. Nelson J.K., Fothergill J.C., Dissado L.A., Peasgood W.: Towards an understanding of nanometric dielectrics. IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 295-298, 2002.
  • 201. Nelson J.K., Fothergill J.C.: Internal Charge Behaviour of Nanocomposites, Nanotechnology, 15, 5, 586-595, 2004.
  • 202. Nelson J.K., Hu Y.: The impact of nanocomposite formulations on electrical voltage endurance. Proceedings of the 2004 IEEE International Conference on Solid Dielectrics ICSD 2004, 2, nr 5-9, 832-835, 2004.
  • 203. Nelson J.K., Utracki L.A.: Maccrone R.K., Reed W.: Role of the interface in determining the dielectric properties of nanocomposites, Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 314-317, 2004.
  • 204. Nguyen M.Q., Malec D., Mary D., Werynski P., Gornicka B., Therese L., Guillot Ph.: Investigations on dielectric properties of enameled wires with nanofilled varnish for rotating machines fed by inventers. IEEE Proceeding on Electrical Insulation Conference, 377 381,2009.
  • 205. Nguyen M.Q., Malec D., Mary D., Werynski P., Gornicka B., Therese L., Guillot Ph.: Nowy rodzaj lakieru domieszkowany nanocząstkami SiO2. Zeszyty problemowe – Maszyny Elektryczne, 84, 211-216, 2009.
  • 206. Nguyen, M.Q. Malec, D. Mary, D. Werynski, P. Gornicka, B. Therese, L. Guillot, Ph.: Silica nanofilled varnish designed for electrical insulation of low voltage inverter-fed motors. IEEE Transaction on Dielectrics and Electrical Insulation, 17, 5, 1349-1356, 2010.
  • 207. Nobel M.L., Picken S.J., Mendes E.: Waterborne nanocomposite resins for Automotive coating applications. Progress in Organic Coatings, 58, 96-104, 2007.
  • 208. Norma ANSI/NEMA MW 1000 Magnet Wire, 2008
  • 209. Norma ASTM D3145:2008 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
  • 210. Norma ASTM D4733-03:2009, Standard Test Methods for Solventless Electrical Insulating Varnishes
  • 211. Norma IEC/TS 60034-18-41: 2006, Evaluation and qualification of electrical insulation systems used in rotating electrical machines when fed from voltage converters. Committee Draft 24.10.2003.
  • 212. Norma IEC/TS 60034-18-42: 2008, Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters.
  • 213. Norma NEMA MG 1-2006: Motors and Generators, Section IV Performance Standards Applying to all Machines, Part 30—Application Considerations for Constant Speed Motors Used an a Sinusoidal Bus With Harmonic Content and General Purpose Motors Used with Adjustable-Voltage or Adjustable-Frequency Controls or Both, Part 31—Definite-Purpose Inverter-Fed Polyphase Motors.
  • 214. Norma NEMA Standard Publication. Application Guide for AC Adjustable Speed Drive Systems, National Electrical Manufacturers Association, Rosslyn, Virginia, 2001.
  • 215. Norma PKN-CLC/TS 60034-17:2006: Maszyny elektryczne wirujące - Część 17: Silniki indukcyjne klatkowe zasilane z przekształtników – Wskazówki dotyczące stosowania.
  • 216. Norma PN-EN 60034-1: 2011, Maszyny elektryczne wirujące – Część 1: Dane znamionowe i parametry.
  • 217. Norma PN-EN 60034-18-22:2002 Maszyny elektryczne wirujące – Część 18-22: Ocena funkcjonalna układów izolacyjnych – Procedury badawcze uzwojeń z przewodów nawojowych okrągłych – Klasyfikacja zmian i zamiennych składników izolacji.
  • 218. Norma PN-EN 60317, Wymagania dotyczące poszczególnych typów przewodów nawojowych.
  • 219. Norma PN-EN 60455-2:2002, Kompozycje reaktywne na bazie żywic stosowane na izolację elektryczną -- Część 2: Metody badań.
  • 220. Norma PN-EN 60464-1:2003, Lakiery stosowane na izolację elektryczną – Część 1: Definicje i wymagania ogólne.
  • 221. Norma PN-EN 60505:2008, Ocena i kwalifikacja układów elektroizolacyjnych.
  • 222. Norma PN-EN 60851, Przewody nawojowe – Metody badań.
  • 223. Norma PN-EN 61800-2:2000 Elektryczne układy napędowe mocy o regulowanej prędkości - Wymagania ogólne - Dane znamionowe niskonapięciowych układów napędowych mocy prądu przemiennego o regulowanej częstotliwości.
  • 224. Obika R., Ishii R., Tatematsu Y., Osada K., Development of a magnet wire with superior inverter surge resistance. Furukawa Review, 24, 65-68, 2003.
  • 225. Okubo H., Lu Y., Hayakawa N.: Partial discharge characteristics of inverter-fed motor coil samples under ac and surge voltage conditions, Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 589-592, 2003.
  • 226. Olejnik M.: Nanokompozyty polimerowe – rola nanododatków. Techniczne Wyroby Włókiennicze, 1-2, 25-31, 2008.
  • 227. Olejnik M.: Nanokompozyty polimerowe z udziałem montmorylonitu - otrzymywanie, metody oceny, właściwości i zastosowanie. Techniczne Wyroby Włokiennicze. 3-4, 67-74, 2008.
  • 228. Pagacz J., Pielichowski K.: Modyfikacja krzemianów warstwowych do zastosowań w nanotechnologii. Czasopismo Techniczne. Chemia, Wydawnictwo Politechniki Krakowskiej, 1-Ch, 133-147, 2007.
  • 229. Pandey J., Raghunathareddy K., Pratheepkumar A., Singh R.: An overview on the degradability of polymer nanocomposites. Polymer Degradation and Stability, 88, 2, Elsevier, 234-250, 2005.
  • 230. Paul D.R., Robeson L.M.: Polymer nanotechnology: Nanocomposites. Polymer, 49, 3187- 3204, 2008.
  • 231. Pavlidou S., Papaspyrides C.D.: A review on polymer-layered silicate nanocomposites. Progress in Polymer Science, 33, 1119-1198, 2008.
  • 232. Pérez N.A., Sylvestre A., Augé J.L., Do M.T., Rowe S.: Dielectric spectroscopy in silicone rubber incorporating nanofillers, IEEE Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2006.
  • 233. Piecyk L.: Nanokompozyty termoplastyczne. Tworzywa Sztuczne i Chemia, 2, 20-25, 2006.
  • 234. Pilawka R., Spychaj T.: Kleje epoksydowe z nanocząstkami do łączenia metali. Kompozyty (Composites), 4, 9, 33-35, 2004.
  • 235. Pissis P., Georgoussis G., Bershtein V.A., Neagu E., Fainleib A.M.: Dielectric studies In homogeneous and heterogeneous polyurethane/polycyanurate interpenetrating polimer networks. Journal of Non-Crystalline Solids, 305, 150-158, 2002.
  • 236. Pitsa D., Vardakis G., Danikas M.G., Kozako M.: Electrical treeing propagation In nanocomposites and the role of nanofillers:simulationwith the aid of cellular automata. Journal of Electrical Engineering, 61, 2, 125-128, 2010.
  • 237. Plamitzer A.M.: Maszyny elektryczne. Wydawnictwa Naukowo-Techniczne, Warszawa, 1982.
  • 238. Pohlmann F., Busch R.: Investigations of magnet wire enamels and impregnants especially for inverter-fed motors. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2, 587-591, 2000.
  • 239. Poradnik materiałoznawstwa elektrycznego, Praca zbiorowa, Państwowe Wydawnictwa Techniczne, Warszawa, 787-790, 1959.
  • 240. Przybylski J., Szulc Z.: Napęd elektryczny - czy faktycznie to takie proste. Napędy i Sterowanie, 1, 1999.
  • 241. Puszkansky B.: Interfaces and interphases in multicomponent materials: past, present, future. European Polymer Journal, 41, 645-662, 2005.
  • 242. Ramajo L.A., Cristóbal A.A., Botta P.M., Porto López J.M., Reboredo M.M., Castro M.S.: Dielectric and magnetic response of Fe3O4/epoxy composites, Composites Part A. Applied Science and Manufacturing, 40, 4, 388-393, 2009.
  • 243. Ramanathan T., Stankovich S., Dikin D.A., Liu H., Shen H., Nguyen S.T., Brinson L.C.: Graphitic Nanofillers in PMMA Nanocomposites – An investigation of particle size and dispersion and their influence on nanocomposite properties. Journal of Polymer Science: Part B: Polymer Physics, 45, 2097-2112, 2007.
  • 244. Rätzke S., Kindersberger J.: Erosion behaviour of nano filled silicone elastomers, Proceedings of the XIVth International Symposium on High Voltage Engineering, Tsinghua University, Beijing, China, 25-29.08.2005, 1-6, 2005.
  • 245. Rausch, H. J.: Systemy impregnacji – porównanie lakierów i żywic pod względem ekonomicznym, ekologicznym i technicznym. Zeszyty Problemowe - Maszyny Elektryczne, 82, 259, 2009.
  • 246. Reading M., Vaughan A.S.: Dispersion and rheology of poly(ethylene oxide) MMT nanocomposites. IEEE Annual Report Conference on Electrical Insulation Dielectric Phenomena, 37-40, 2008.
  • 247. Renukappa N.M., Siddaramaiah R.D., Sudhaker S.J., Sundara R., Lee J.H.: Dielectric properties of carbon black: SBR composites. Journal of Material Science: Materials in Electronics, 20, 648-656, 2009.
  • 248. Rong M.Z., Zhang M.Q., Liu H., Zeng H., Wetzel B., Friedrich K.: Microstructure and tribological behavior of polymeric nanocomposites. Industrial Lubrication and Tribology, 53, 2, 72-77, 2001.
  • 249. Roy M., Nelson J.K., MacCrone R.K., Schadler L.S.: Candidate mechanisms controlling the electrical characteristics of silica/XLPE nanodielectrics. Journal of Materials Science, 42, 3789-3799, 2007.
  • 250. Roy M., Nelson J.K., MacCrone R.K, Schadler L.S., Reed C.W., Keefe R., Zenger W.: Polymer nanocomposite dielectrics - the role of the interface, Trans. IEEE, DEI-12, 629- 643, 2005.
  • 251. Roy M., Nelson J.K., Reed C.W., MacCrone R.K., Keefe R.J., Zenger W., Schadler L.S.: Polymer nanocomposite dielectrics – the role of the interface. IEEE Transactions on Dielectrics and Electrical Insulation, 4, 629-643, 2005.
  • 252. Roy M., Reed C.W., Maccrone R.K., Schadler L.S., Nelson J.K., Keefe R., Zenge W.: Evidence for the role of the interface in polyolefin nanocomposites. Proceedings of 2005 Intemational Symposium on Electrical Insulating Materials, 5-9.06.2005, Kitakyushu, Japan, 2005.
  • 253. Ruiz-Perez L., Royston G.J., Patrick J., Fairclough A., Ryan A.J.: Toughening by nanostructure. Polymer, 49, 4475-4488, 2008.
  • 254. Runge J.: Hot melt resin. The modern alternative to the manufacturing of enamelled wire. BASF Lacke & Farben, Wire, 41, 3, 209-212, 1991.
  • 255. Ryan K.P., Cadek M., Nicolosi V., Blond D., Ruether M., Armstrong G., Swan H., Fonseca A., Nagy J.B., Maser W.K., Blau W.J., Coleman J.N.: Carbon nanotubes for reinforcement of plastics? A case study with poly(vinyl alcohol). Composites Science and Technology, 67, 7-8, 1640-1649, 2007.
  • 256. San S.E., Yerli Y., Okutan M., Yılmaz F., Gunaydın O., Hames Y.: Temperature dependency of electrical behaviors in single walled carbon nanotube/conducting polimer composites. Materials Science and Engineering B, 138, 284-288, 2007.
  • 257. Sarathi R., Kumar P.R., Sahu R.K.: Analysis of surface degradation of epoxy nanocomposite due to tracking under AC and DC voltages. Polymer Degradation and Stability, 92, 560-568, 2007.
  • 258. Sarathi R., Sahu R., Danikas M.G.: Understanding the mechanical properties of epoxy nanocomposite insulating materials. Journal of Electrical Engineering, 60, 6, 358-361, 2009.
  • 259. Sargsyan A., Tonoyan A., Davtyan S., Schick Ch.: The amount of immobilized polymer In PMMA SiO2 nanocomposites determined from calorimetric data. European Polymer Journal, 43,3113-3127, 2007.
  • 260. Shahzada A., Sharif A.: Agnihotry S A: Synthesis and characterization of in situ prepared poly(methyl methacrylate) nanocomposites. Bulletin Materials of Science, 30, 1, 31-35, 2007.
  • 261. Singha S., Thomas M.J.: Dielectric properties of epoxy nanocomposites, IEEE Transactions on Dielectrics and Electrical Insulation, 15, 1, 12-23, 2008.
  • 262. Sionkowski G., Kaczmarek H.: Polimery z nanocząstkami srebra – wybrane układy – otrzymywanie, właściwości, zastosowania. Polimery, 55, 7-8, 545-551, 2010.
  • 263. Sipaut C.S., Ahmad N., Adnan R., Rahman I., Bakar M.A., Ismail J., Chee C.K.: Properties and morphology of bulk epoxy composites filled with modified fumed silica-epoxy nanocomposites. Journal Applied of Science, 7, 1, 27-34, 2007.
  • 264. Smaoui H., Mir L.E.L., Guermazi H., Agnel S., A. Toureille: Study of dielectric relaxations in zinc oxide-epoxy resin nanocomposites. Journal of Alloys and Compounds, 477, 316-321, 2009.
  • 265. Smith R. C., Liang C., Landry M., Nelson J.K., Schadler L.S.: The mechanisms leading to the useful electrical properties of polymer nanodielectrics. IEEE Transactions on Dielectrics and Electrical Insulation, 15, 1, 187-196, 2008.
  • 266. Snopczyński T., Góralczyk K., Czaja K., Struciński P., Hernik A., Korcz W., Ludwicki J. K.: Nanotechnologia - Możliwości i zagrożenia. Roczn. PZH 2009, 60, 2, 101-111, 2009.
  • 267. Sowwan M., Faroun M., Musa I., Ibrahim I., Makharza S., Sultan W., Dweik H.: Study on the morphology of polyacrylamide - silica fumed nanocomposite thin films. International J Phys Sci, 3, 6, 144-147, 2008.
  • 268. Sridhar A., Joy M. T.: Electrical treeing in polymer nanocomposites. Fifteenth National Power Systems Conference (NPSC), IIT Bombay, 351-355, 2008.
  • 269. Stone G.C., Boulter E. A.,Culbert I., Dhirani H.: Electrical insulation for rotating machines - design, evaluation, aging, testing and repair, Wiley-IEEE Press, 2004.
  • 270. Sun L., Boo W.-J., Clearfield A.,. Sue H.-J, Pham H.Q.: Barrier properties of model epoxy nanocomposites. Journal of Membrane Science, 318,129-136, 2008.
  • 271. Sun Y., Zhang Z., Wong C.P.: Influence of interphase and moisture on the di electric spectroscopy of epoxy/silica composites. Polymer, 46, 2297-2305, 2005.
  • 272. Szymaniec S.: Diagnostyka stanu izolacji silników indukcyjnych wysokonapięciowych offline w przemysle. Zeszyty Poblemowe - Maszyny Elektryczne, 71, 77-82, 2005.
  • 273. Tanaka T., Kozako M., Fuse N., Ohki Y.: Proposal of multi-core model for polimer nanocomposite dielectrics, IEEE Transactions on Dielectrics and Electrical Insulation, 4, 669-681, 2005.
  • 274. Tanaka T.: Dielectric Nanocomposites with Insulating Properties, IEEE Transaction on Dielectrics and Electrical Insulation, 12, 5, 914-928, 2005.
  • 275. Tanaka T.: Multi-core model for nanodielectrics as fine structures of interaction zones. Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 713-716, 2005
  • 276. Tarifa J.M.M., Feito J.S., Duarte H.A.: Turn to turn insulation ageing diagnosis Rusing frequency response analysis. Proceedings of the IEEE International Conference on Solid Dielectrics, ICSD 2004, 2, 880-883, 2004.
  • 277. Thostenson E.T., Li Ch., Chou T.-W.: Nanocomposites in context. Composites Science and Technology, 65, 491-516, 2005.
  • 278. Thurman C.E.: Trickle impregnation of small motors. Electrical Insulation Magazine, IEEE, 5, 3, 30-35, 1989.
  • 279. Tjong S.C., Liang G.D., Bao S.P. : Electrical behavior of polypropylene/multiwalled carbon nanotube nanocomposites with low percolation threshold. Scipta Materialia, 57, 461-464, 2007.
  • 280. Tjong S.C., Liang G.D.: Electrical properties of low-density polyethylene/ZnO nanocomposites. Materials Chemistry and Physics, 100, 1-5, 2006.
  • 281. Tjong S.C.: Structural and mechanical properties of polymer nanocomposites. Materials Science and Engineering, R 53, 73-197, 2006.
  • 282. Trajdos M.: Jakie kable lubią falowniki. Zeszyty Problemowe-Maszyny Elektryczne, 71, 31-35, 2005.
  • 283. Tuncer E., Souers I.: Industrial applications perspective of nanodielectrics. Dielectric Polymer Nanocomposites, rozdz. 11, Springer, 321-338, 2010.
  • 284. Tunia H., Winiarski B.: Energoelektronika. Wydawnictwa Naukowo-Techniczne, Warszawa, 1994.
  • 285. VanderHart D.L., Asano A., Gilman J.W.: Solid-state NMR nnvestigation of paramagnetic nylon-6 clay nanocomposites. Crystallinity, morphology, and the direct influence of Fe3+ on nuclear spins. Chemistry of Materials, 13, 10, 3781- 3795, 2001.
  • 286. Vega-Baudrit J., Sibaja-Ballestero M., Vázquez P., Nuñez S., Jose M.: Kinetics of isothermal degradation studies in adhesives by thermogravimetric data: Effect of hydrophilic nanosilica fillers on the thermal properties of thermoplastic polyurethane-silica nanocomposites. Recent Patents on Nanotechnology, 2, 3, 220-226, 2008.
  • 287. Wang Ch., Guo Z.-X., Fu S., Wu W., Zhu D.: Polymers containing fullerene or carbon nanotube structures. Progress in Polymer Science, 29, 1079-1141, 2004
  • 288. Wang S.-F. , Wang Y.-R. , Cheng K.-Ch. , Hsaio Y.-P.: Characteristics of polyimide/bariom titanate composite films. Ceramics International, 35, 265-268, 2009.
  • 289. Winkeler M.: Magnet wire enamels – Which one?. P D George Co, IEEE Electrical Insulation Magazine, 7, 4, 61-64, 1991.
  • 290. Winkeler M., Goetter R.W.: Nanomaterials in liquid insulation to improve moisture resistance and pulse endurance in inverter duty motor applications. IEEE Electrical Insulation Conference EIC 2009, 401-404, 2009.
  • 291. Wu W., He T., Chen J.-f., Zhang X., Chen Y.: Study on in situ preparation of nano calcium carbonate/PMMA composite particles. Materials Letters, 60, 2410-2415, 2006.
  • 292. Wu J., Yang Sh., Gao Sh., A. Hu, Liu J. , Fan L. : Preparation, morphology and properties of nano-sized Al2O3/polyimide hybrid films. European Polymer Journal, 41, 73-81, 2005.
  • 293. Wu W., Ke Y.: The absorption and thermal behaviors of PET-SiO2 nanocomposite films. Polymer Degradation and Stability, 91, 1455-1461, 2006.
  • 294. Yang-Chuan K., Guang-Yao W., Yi W.: Preparation, morphology and properties of nanocomposites of polyacrylamide copolymers with monodisperse silica. European Polymer Journal, 44, 2448-2457, 2008.
  • 295. Yin W.: Dielectric Properties of an improved magnet wire for inverter-fed motors. Electrical Insulation Magazine, IEEE, 13, 4, 17-23, 1997.
  • 296. Yin W.: Failure mechanism of winding insulations in inverter-fed motors. Electrical Insulation Magazine, IEEE, 13, 6, 18-23, 1997.
  • 297. Yin W., Barta D.J.: Pulsed Voltage Surge Resistant Magnet Wire. Patent nr US5654095, 1987
  • 298. Yin W., K. Bultemeier K., Barta D., Floryan D.: Improved magnet wire for inverter-fed motors. Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Conference. Proceedings, 379-382, 1997.
  • 299. Yin Y., Chen J., Yang J. Xiao D., Tu D., Yin R., Qian H.: Effect of space charge In nanocomposite of LDPE/TiO2. Proceedings of the 7th International Conference on Properties and Applications of Dielectric Materials, 3, 913-916, 2003.
  • 300. Yin Y., Dong X., Li Z., Li X.: The effect of electrically prestressing on DC break down strength in the nanocomposite of low-density polyethylene/nano-SiOx. IEEE International Conference on Solid Dielectrics, 372-376, 2007.
  • 301. Yu S., Zhao J., Chen G., Juay Y.K., Yong M.Sh.: The characteristics of polyamide layeredsilicate nanocomposites, Journal of Materials Processing Technology, 192-193, 410-414, 2007.
  • 302. Yudin V.E., Otaigbe J.U., Gladchenko S., Olson B.G., Nazarenko S., Korytkova E.N., Gusarov V.V.: New polyimide nanocomposites based on silicate type nanotubes: Dispersion, processing and properties. Polymer, 48, 1306-1315, 2007.
  • 303. Zhang Y.-H., Dang Z.-M., Fu S.-Y., Xin J.H., Deng J.-G., Wu J., Yang S., Li L.-F., Yan Q.: Dielectric and dynamic mechanical properties of polyimide-clay nanocomposite films. Chemical Physics Letters, 401, 553-557, 2005.
  • 304. Zhang J., Jiang D.D., Wang D., Wilkie Ch.A.: Styrenic polymer nanocomposites based on an oligomerically-modified clay with high inorganic content. Polymer Degradation and Stability, 91, 2665-2674, 2006.
  • 305. Zhang C., Stevens G.C.: The dielectric response of polar and non-polar nanodielectrics, IEEE Transactions on Dielectrics and Electrical Insulation, 15, 2, 606-617, 2008.
  • 306. Zhang G., Wu G., Tong L., He E.: Study of nano TiO2 filler in the corona-resistant magnetic wire insulation performance of inverter-fed motor. Proceedings of lntemational Symposium on Electrical Insulating Materials, Japan, 180-183, 2005.
  • 307. Zhang H., Zhang Z., Friedrich K., Eger Ch.: Property improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content. Acta Materialia, 54, 1833-1842, 2006.
  • 308. Zheng J., Ozisik R., Siegel R.W.: Disruption of self-assembly and altered mechanical behavior in polyurethane/zinc oxide nanocomposites. Polymer, 46, 10873-10882, 2005.
  • 309. Zhou K., Wu G., Lei K., Wu J., Liu J.: Aging Time Effect on PD Characteristics under Continuous Pulse Voltage. International Conference on Solid Dielectrics, Winchester, UK, 8-13.07.2007, 616-618, 2007.
  • 310. Zhu A., Cai A., Zhou W., Shi Z.: Effect of flexibility of grafted polymer on the morphology and property of nanosilica/PVC composites. Applied Surface Science 254, 13, 3745-3752, 2008.
  • 311. Zou C., Fothergill J. C., Fu M., Nelson J. K.: Improving the Dielectric Properties of Polymers by Incorporating Nanoparticles, Proceedings of the 10th International Conference on Electrical Insulation (INSUCON), Birmingham, 1-6, 2006,
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS4-0001-0015
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.