PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Badania eksperymentalne modelu transformatora z uzwojeniami wykonanymi z taśmy nadprzewodnikowej HTS drugiej generacji

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Experimental investigation of the model of superconducting transformer with the windings made of 2G HTS tape
Języki publikacji
PL
Abstrakty
PL
W artykule przedstawiono wyniki badań eksperymentalnych 1-fazowego modelu transformatora nadprzewodnikowego ze szczególnym uwzględnieniem możliwości ograniczania wartości prądu zwarcia przez uzwojenie nadprzewodnikowe, ze względu na parametry techniczne zastosowanej taśmy nadprzewodnikowej, w szczególności uwzględniając rezystywność taśm w stanie rezystywnym, w temperaturze 77 K.
EN
This article presents the results of an experimental investigation of a 1-phase model of a superconducting transformer, with special regard to the possibility of limiting the short-circuit current by the superconducting winding, according to the parameters of the HTS tapes used, in particular their resistivity in normal state at a temperature of 77 K.
Rocznik
Strony
258--261
Opis fizyczny
Bibliogr. 3 poz., rys., tab.
Twórcy
autor
autor
Bibliografia
  • [1] N. Hayakawa, H. Kojima, M. Hanai, H. Okubo, „Progress in Development of Superconducting Fault Curren Limiting Transformer", IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1397-1399, 2011.
  • [2] H. Kijima, M. Kotari, T.Kito, N. Hayakawa. M. Hanai, H. Okubo, “Current Limiting and Recovery Characteristics of 2 MVA Class Superconducting Fault Current Limiting Transformer (SFCLT)”, IEEE Trans. Appl. Supercond., vol. 21, no. 3. pp. 1401-1404, 2011.
  • [3] A. Berger, M. Noe, A. Kudymow, “Test Results of 60 kVA Current Limiting Transformer With Fully Recovery Under Load”, IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1384-1387, 2011.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS3-0026-0143
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.