EMC Requirements and Test Methods for Light Emitting Diodes

• Autorzy: Bao X. , Fan S. , Pan J. , Liu M. , Liu M. , Shen H.

Warianty tytułu

PL

Wymagania elektrokompatybilności i metody badania układów LED

• Języki publikacji: EN

Abstrakty

EN

EMC test is important for the reliability improvement of LEDs and their application products. This paper introduces the EMC requirements for LED chips, LED devices and LED application products, focusing on electrostatic discharge, electrical fast transient, thunder stroke surge, voltage dip, conductive interference and radio frequency interference. Corresponding test methods are also given. These EMC requirements and test methods are valuable for LED manufacturer and end users.

PL

W artykule przedstawiono wymagania EMC w stosunku do LEDów oraz urządzeń z nimi współpracujących, takich jak wyładowania elektrostatyczne, stany przejściowe, skoki napięcia, interferencje. Przedstawiono odpowiednie metody badawcze. (Wymagania elektrokompatybilności i metody badania układów LED)

Słowa kluczowe

EN

LED; EMC; EMI; EMS; test method

PL

diody LED; kompatybilność elektromagnetyczna

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2012
• Tom: R. 88, nr 10a
• Strony: 269--272
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Bao X.

autor

Fan S.

autor

Pan J.

autor

Liu M.

autor

Liu M.

autor

Shen H.

• Department of Light Sources and Illuminating Engineering, Engineering Research Center of Advanced Lighting Technology, Ministry of Education, Fudan University, China,,

Bibliografia

• [1] V.Prasad Kodali Engineering Electromagnetic Compatibility Principles, Measurements, Technologies, and Computer Models (Second Edition) 2005
• [2] Clayton R.Paul Introduction to Electromagnetic Compatibility (Second Edition)
• [3] LIU Jin ,CHEN Yong-guang ,TAN Zhi-liang and CHEN Xiang, Transactions of BeiJing Institute of Technology Research on Irradiation Effect of Electrostatic Discharge Radiation Field 2011
• [4] IEC 61000-4-2 Electromagnetic compatibility (EMC)-Part 4-2: Testing and measurement techniques-electrostatic discharge immunity test. 2002
• [5] Francesco Musolino; Franco Fiori IEEE Transactions on Electromagnetic Compatibility Modeling the IEC 61000-4-4 EFT Injection Clamp 2008, 50 (4)
• [6] IEC/CISPR NO.16 Edition 2008
• [7] Aiying He, Safety & EMC, Difference of Standard Edition lEC 61 000—4-11and Effect to Measurement 2008
• [8] International Electrotechnical Commission. IEC 61000-4-2：2001 electromagnetic compatibility（EMC）：part 4-2：testing and measurement techniques：electrostatic discharge immunity test［ S］. Geneva，Switzerland：IEC Central Office ，2002.
• [9] National Standards of Peoples Republic of China GB /T 18595-2001 / IEC 61547:1995 Equipment for general lighting purposes-EMC immunity requirements
• [10] National Standards of Peoples Republic of China GB 17625.1-2003 / IEC61000-3-2:2001