Preparation and properties of porous carbon material containing magnesium oxide

• Autorzy: Przepiórski J. , Czyżewski A. , Kapica J. , Casa-Lillo M. A. de la
• Języki publikacji: EN

Abstrakty

EN

Porous carbons loaded with magnesium oxide were prepared through one-step process. Poly(ethylene terephthalate) and natural magnesite were used as carbon source and MgO precursor, respectively. An impact of a temperature and relative amounts of raw components used for preparations on the textural parameters of resulting hybrid materials is presented and discussed. As found, pore structure parameters tend to decrease along with MgO loading and temperature used during preparation process. Micropore area is the parameter being reduced primarily.

Słowa kluczowe

EN

porous carbon; MgO; porosity

PL

węgiel porowaty; MgO; porowatość

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2011
• Tom: Vol. 13, nr 4
• Strony: 42--46
• Opis fizyczny: Bibliogr. 21 poz., rys., tab.

Twórcy

autor

Przepiórski J.

autor

Czyżewski A.

autor

Kapica J.

autor

Casa-Lillo M. A. de la

• West Pomeranian University of Technology in Szczecin, Institute of Chemical and Environmental Engineering, ul. Pułaskiego 10, 70-322 Szczecin, Poland,

Bibliografia

• 1. Cambridge Filter Japan, Ltd. (2009). Product information. Received May 16, 2009, from http://www.cambridgefi lter.com/english/productsE/tcc-en/tcc-en.htm.
• 2. Liu, Z.-S. (2008). Adsorption of SO2 and NO from incineration flue gas onto activated carbon fibers. Waste Manage., 28, 2329–2335. DOI:10.1016/j.wasman.2007.10.013.
• 3. Aroua, M.K., Daud, W.M.A.A., Yin, C.Y. & Adinata, D. (2008). Adsorption capacities of carbon dioxide, oxygen,nitrogen and methane on carbon molecular basket derived from polyethyleneimine impregnation on microporous palm shell activated carbon. Sep. Purif. Technol., 62, 609–613. DOI:10.1016/j.seppur.2008.03.003.
• 4. Houshmand, A., Wan Daud, W.M.A., & Shafeeyan, M. S. (2011). Exploring Potential Methods for Anchoring Amine Groups on the Surface of Activated Carbon for CO2 Adsorption. Sep. Purif. Technol., 46, 1098–1112. DOI:10.1080/01496395.2010.546383.
• 5. Zhang, Z., Ma, X., Wang, D., Song C. & Wang, Y. (2011). Development of silica-gel-supported polyethylenimine sorbents for CO2 capture from fl ue gas. AIChE J., DOI:10.1002/aic.12771.
• 6. Przepiórski, J., Yoshida, S. & Oya, A. (1999). Structure of K2CO3-loaded activated carbon fi ber and its deodorization ability against H2S gas. Carbon, 37, 1881–1890. DOI:10,1016/S0008-6223(99)00088-3.
• 7. Henning, K.D. & Schäfer, S. (1993). Impregnated activated carbon for environmental protection, Gas Sep. Purif., 7, 235–240. DOI:10.1016/0950-4214(93)80023-P.
• 8. Hedin, N., Chen, L. & Laaksonen, A. (2010). Sorbents for CO2 capture from fl ue gas—aspects from materials and theoretical chemistry. Nanoscale, 2, 1819–1841. DOI:10.1039/c0nr00042f.
• 9. Wu, Z., Hao, N., Xiao, G., Liu, L., Webley, P. & Zhao, D. (2011). One-pot generation of mesoporous carbon supportednanocrystalline calcium oxides capable of effi cient CO2 capture over a wide range of temperatures. Phys. Chem. Chem. Phys., 13, 2495–2503. DOI:10.1039/c0cp01807d.
• 10. Przepiórski, J. (2006). Activated carbon fi lters and their industrial applications in Activated Carbon Surfaces in Environmental Remediation (Interface Science and Technology, Volume 7, ed. T.J. Bandosz, chapter 9, ISBN:0-12-370536-3, pp.421-474). Academic Press.
• 11. Przepiórski, J., Abe, Y., Yoshida, S. & Oya, A. (1997). Preferential supporting of potassium carbonate around the peripheral region of activated carbon fi ber. J. Mater. Sci. Lett., 16, 1312–1314. DOI:10.1023/A:1018599513817.
• 12. Yong, Z., Mata. V.G. & Rodrigues, A.E. (2001). Adsorption of carbon dioxide on chemically modifi ed high surface area carbon-based adsorbents at high temperature. Adsorption, 7, 41–50. DOI:10.1023/A:1011220900415.
• 13. Bhagiyalakshmi, M., Hemalatha, P., Ganesh, M., Peng, M.M. & Jang, H.T. (2011). A direct synthesis of mesoporous carbon supported MgO sorbent for CO2 capture. Fuel, 90, 1662–1667. DOI:10.1016/j.fuel.2010.10.050.
• 14. She, L., Li, J., Wan, Y., Yao, X., Tu, B. & Zhao, D. (2011). Synthesis of ordered mesoporous MgO/carbon composites by a one-pot assembly of amphiphilic triblock copolymers. J. Mater.Chem., 21, 795–800. DOI:10.1039/c0jm02226h.
• 15. Bhagiyalakshmi, M., Lee, J.Y. & Jang, H.T. (20011). Synthesis of mesoporous magnesium oxide: Its application to CO2 chemisorption. Int. J. Greenh. Gas Con., 4, 51–56.DOI:10.1016/j.ijggc.2009.08.001.
• 16. Lee, S.J., Jung, S.Y., Lee, S.C., Jun, H.K., Ryu, C.K. & J.C. Kim. (2009). SO2 removal and regeneration of MgO based sorbents promoted with titanium oxide. Ind. Eng. Chem. Res., 48, 2691–2696. DOI:10.1021/ie801081u.
• 17. Hassanzadeh, A. & Abbasian, J. (2010). Regenerable MgO-based sorbents for high-temperature CO2 removal from syngas: 1. Sorbent development, evaluation, and re action modeling. Fuel, 89, 1287–1297. DOI:10.1016/j.fuel.2009.11.017.
• 18. Inagaki, M., Kobayashi, S., Koijn, F., Tanaka, N., Morishita, T. & Tryba, B. (2004). Pore structure of carbon coated on ceramic particles. Carbon, 42, 3153–3158. DOI:10.1016/j.carbon.2004.07.029.
• 19. Inagaki, M., Kato, M., Morishita, T. Morita, K. (2007). Direct preparation of mesoporous carbon from a coal tar pitch. Carbon, 45, 1121–1124. DOI:10.1016/S1095-6433(98)00008-7.
• 20. Przepiórski, J., Karolczyk, J., Takeda, K., Tsumura, T., Toyoda, M. & Morawski, A. M. (2009). Porous carbon obtained by carbonization of PET Mixed with basic magnesium carbonate: Pore structure and pore creation mechanism. Ind. Eng. Chem. Res. 48, 7110–7116. DOI:10.1021/ie801694t.
• 21. Przepiórski, J., Karolczyk, J., Tsumura, T., Toyoda, M., Inagaki, M. & Morawski, A. W. (2011). Effect of some thermally unstable magnesium compounds on the yield of char formed from poly(ethylene terephthalate). J. Therm. Anal. Calorim. DOI:10.1007/s10973-011-1910-1.