Influence of wet chemistry treatment on the mechanical performance of natural fibres

• Autorzy: Koziol M. , Bogdan-Wlodek A. , Myalski J. , Wieczorek J.
• Języki publikacji: EN

Abstrakty

EN

The paper presents determination of the effect of various chemical treatment on the strength of 288 tex jute yarn arisen from the plain weave fabric produced by LENTEX, Poland. The yarn was put to alternative treatments in: NaOH and KOH water solutions with various concentration (from 1 to 15%) and treatment duration (from 0.5 to 6 hours), vinyl acetate, methanol and toluene diisocyanate. After the treatment it was put to tensile tests. Yarn diameter and elementary fibre twist angle were also measured using MICRO PROF FRT optical profilographometer. The SEM micro-photographs have also been performed in order to evaluate the structural changes of the yarn after the treatment. Optimal conditions of alcali-treatment are: 5% concentration and 2h duration for NaOH, 3% concentration and 4h duration for KOH. Such treatments give a growth in yarn rupture force up to 10% and they are well applicable in composite materials manufacturing. Also interaction with vinyl acetate and toluene diisocyanate has practically not negative influence on the mechanical performance of the yarn. Two effects were observed which can explain the influence of chemical treatment on mechanical performance of jute yarn: swelling and change in the orientation of elementary fibres.

Słowa kluczowe

EN

natural fibres; jute fibres; surface treatment; mechanical performance; fibre reinforced composites

PL

włókna naturalne; włókna juty; obróbka powierzchni; wydajność mechaniczna; wzmacnianie włóknami

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2011
• Tom: Vol. 13, nr 4
• Strony: 21--27
• Opis fizyczny: Bibliogr. 16 poz., rys., tab.

Twórcy

autor

Koziol M.

autor

Bogdan-Wlodek A.

autor

Myalski J.

autor

Wieczorek J.

• Silesian University of Technology, Faculty of Materials Engineering and Metallurgy, ul. Krasinskiego 8, 40-019 Katowice, Poland,

Bibliografia

• 1. Bledzki, A. & Gassan, J. (1999). Composites reinforced with cellulose fi bres. Prog. Polymers. Sci. 24, 221–274.
• 2. Williams, G.I. & Wool, R.P. (2000). Composites from natural fibers and soy oil resins. Appl. Compos. Mater., 7, 421–32.
• 3. Sinha, E. & Rout, S.K. (2009). Infl uence of fi bre-surface treatment on structural, thermal and mechanical properties of jute fi bre and its composite. Bull. Mater. Sci., 1, 65–76.
• 4. Gassan, J. & Bledzki, A. (1999). Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fi bres. Comp. Sci. and Techn., 59, 1303–1309.
• 5. Khan, F. & Ahmad, S.R. (1996). Chemical modifi cation and spectroscopic analysis of jute fi bre. Pol. Degr. and Stab., 52, 335–340.
• 6. Sgriccia, N. & Hawley, M.C. (2007). Thermal, Morphological, and electrical characterization of microwave processed natural fiber composites. Comp. Sci. and Techn., 66(9), 1986–1991.
• 7. Sapieha, S., Verreault, M., Klemberg-Sapieha, J. E., Sacher, E., Wertheimer, M.R. (1990). X-ray photoelectron study of the plasma fl uorination of lignocellulose. Appl. Surf. Sci., 2, 165–169.
• 8. Van den Oever, M.J.A, Bos H.L. & van Kemenade, M.J. J.M. (2000). Infl uence of the physical structure of fl ax fi bres on the mechanical properties of flax fibre reinforced polypropylene composites. Appl. Comp. Mat., 7, 387–402.
• 9. Bogdan, A., Myalski, J., Wieczorek, J. & Koziol, M. (2009).Infl uence of chemical treatments for structure and mechanical properties of jute fi bres used for polymer – matrix composite producing. Kompozyty, 4, 358–362 (in Polish).
• 10. Hyla, I. & Sleziona, J. (2004). Composites. Elements of mechanics and design. Wydawnictwo Politechniki Slaskiej, Gliwice (in Polish).
• 11. Mastalerz, P. (1986). Organic chemistry. PWN, Warszawa (in Polish).
• 12. Bachtiar, D., Sapuan, S.M. & Hamdan, M.M. (2008). The effect of alkaline treatment on tensile properties of sugar palm fi bre reinforced epoxy composites. Mat. and Des., 29, 1285–1290 DOI: 10.1016/j.matdes.2007.09.006.
• 13. Van de Weyenberg, I., Truong, T.C., Vangrimde, B. & Verpoest, I. (2006). Improving the properties of UD flax fibre reinforced composites by applying an alkaline fi bre treatment. Comp.: Part A, 37, 1368–1376, DOI: 10.1016/j.compositesa.2005.08.016.
• 14. Sydenstricker, T.H.D., Mochnaz, S., Amico, S.C. (2003). Pull-out and other evaluations in sisal-reinforced polyester biocomposites. Pol. Tes., 22, 375–380, DOI: 10.1016/S0142-9418(02)00116-2.
• 15. Cao, Y., Shibata, S., Fukumoto, I. (2006). Mechanical properties of biodegradable composites reinforced with bagasse fibre before and after alkali treatments. Comp.: Part A, 37, 423–429, DOI: 10.1016/j.compositesa.2005.05.045.
• 16. Canche-Escamilla, G., Cauich-Cupul, J.I., Mendizabal E., Puig, J.E., Vazquez-Torres, H. & Herrera-Franco P.J. (1999). Mechanical properties of acrylate-grafted henequen cellulose fibers and their application in composites. Comp.: Part A, 30, 349–359.