ModelIing the influence of anisotropy on magnetic properties in grain-oriented steels

• Autorzy: Chwastek K. , Najgebauer M. , Szczygłowski J. , Wilczyński W.

Warianty tytułu

PL

Modelowanie wpływu anizotropii na własności magnetyczne orientowanej blachy elektrotechnicznej

• Języki publikacji: EN

Abstrakty

EN

The paper presents an anisotropy model of magnetic properties based on the concept of coenergy. The proposed model is veriffied for chosen grades of grain-oriented electrical steel. It is shown, that it is possible to predict magnetization curves for arbitrary values of angle ∝ on the basis of easurements, made in two directions of sample.

PL

W artykule przedstawiono model anizotropii właściwości magnetycznych oparty o koncepcję ko-energii. Zaproponowany model został zweryfikowany dla orientowanych blach elektrotechnicznych o wybranych grubościach. Wykazano możliwość uzyskania pętli histerezy dla dowolnego kąta a wycięcia próbki, w oparciu o pomiary wykonane wyłącznie w dwóch kierunkach.

Słowa kluczowe

EN

anisotropy; Fröhlich aquation; grain oriented steel; moditied elliptic model

PL

anizotropia; równanie Fröhlich; orientowana blacha elektrotechniczna; zmodyfikowany model eliptyczny

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Elektrotechniczny
• Rocznik: 2011
• Tom: R. 87, nr 3
• Strony: 126--128
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Chwastek K.

autor

Najgebauer M.

autor

Szczygłowski J.

autor

Wilczyński W.

• Częstochowa University of Technology, Faculty ot Electrical Engineering,

Bibliografia

• [1] Spornic S. A. Kedous-Lebouc A..,Carnut B., Anisotropy and texture influence on 2D magnetic behaviour for silicon, kobalt and Nikel iron alloys, J. Magn. Magn. Mater., 215-216 (2000) 614-616.
• [2] Dupre L., Van Keer R., Melkebeek J A A., Numerical evaluation of the influence of anisotropy on the eddy currents in laminated ferromagnetic alloys, IEEE Trans. Magn., 38 (2002), No. 2, 813-816
• [3] Jesenik M., Gorican V., Trlep M., Hamler A., Śtumberger B., Transient anisotropic magnetic field calculation, Physica B, 372 (2006),185-189
• [4] Fiorillo F., Anisotropy and magnetization processes in soft magnets: principles, experiments, applications, J. Magn. Magn. Mater., 304 (2006), 139-144
• [5] Tumański SI., Bakon T., Measuring system for two- dimensional testing of electrical steel, J. Magn. Magn. Mater., 223 (2001), 315-316
• [6] Tumański SI., Investigations of the anisotropic behaviour of SiFe steel, J. Magn. Magn. Mater., 254-255 (2003), 50-53
• [7] Fryskowski B., Experimental evaluation of magnetic anisotropy in electrical steel sheet, J. Magn. Magn. Mater., 320 (2008), 515-522
• [8] Pfutzner H., Rotational magnetization and rotationallosses of grain oriented silieon steel sheets - fundamental aspects and theory", IEEE Trans. Magn., 30 (1994), No. 5, 2802-2807
• [9] Sievert J., Ahlers H., Birkfeld H., Cornut B., Fiorillo F., Hempel K A Kochmann T, Kedous- Lebouc A., Meydan T, Moses A J., Rietlo A.M., European intercomparison of measurements of rotational power loss in electrical sheet steel, J. Magn. Magn. Mater., 160 (1996), 115-118
• [10] Stranges N., Findlay R. D., Measurement of rotational iron losses in electrical steel, IEEE Trans. Magn., 36 (2000), No. 5, 3457-3459
• [11] Gorican V., Hamler A., Jesenik M., Śtumberger B., Trlep M., Unreliable determination of vector B in 2-D SST, J. Magn. Magn. Mater., 254-255 (2003), 130-132
• [12] Štumberger B., Gorcan V., Štumberger G., Hamler A., Trlep M., Jesenik M., Accuracy of iron loss calculation in electrical machines by using different iron loss models, J. Magn. Magn. Mater., 254-255 (2003),269-271
• [13] Ragusa C., Zurek S., Appino C., Moses A.J., An intercomparison of rotational loss measurements in non- oriented Fe-Si alloys, J. Magn. Magn. Mater., e623-e626
• [14] Cornut B., Kedous-Lebouc A., Waeckerle Th., From metallurgy to modelling of electrical steels: a multiple approach to their behaviour and use based on physics and experimental investigations (invited paper), J. Magn. Magn. Mater. 160 (1996), 102-106
• [15] Pera T, Ossart F., Waeckerle Th., Numerical representation for anisotropic materials based on coenergy modeling, J. Appl. Phys., 73 (1993), No. 10,6784-6786:
• [16] Biró O., Aufśerhofer S., Preis K., Chen Y,A A modified elliptic model of anisotropy in nonlinear magnetic materials,Proc. 8th Int. Symp. on Electric and Magnetic Fields EMF 2009 Mondovi (Italy), 26th-29th May 2009, Book of Abstracs, 2009, 25-26, full text on CD
• [17] Bronsztein I.N., Semendiajew K.A., Musiol G. Muhlig H., Nowoczesne kompendium matematyki, PWN, 2007
• [18] Finkel D.E., Global optimization with the DIRECT algorithm, PhD Thesis, North Carolina State University, Raleigh 2005
• [19] Chwastek K., Szczygłowski J., An alternative estimate the parameters of Jiles-Athertan model. J. Magn. Magn. Mater., 314 (2007), 47-51
• [20] Hadźiselimović M., Vitric P., Śtumberger G. T., Marcič T, Śtumberger B., Determining farce characteristics of an electromagnetic brake using co-energy, J. Magn. Magn.Mater., 320 (2008), e556-e561