Single-walled carbon nanotubes fractionation via electrophoresis

• Autorzy: Scheibe B. , Lukaszczuk P. , Rümmeli M. H. , Kalenczuk R. J. , Borowiak-Palen E.
• Języki publikacji: EN

Abstrakty

EN

This work presents the influence of the sonication time on the efficiency of the metallic/semiconducting (M/S) fractionation of diazonium salt functionalized single-walled carbon nanotubes (SWCNTs) via free solution electrophoresis (FSE) method. The SWCNTs synthesized via laser ablation were purified from amorphous carbon and catalyst particles through high vacuum annealing and subsequent refluxing processes in aqua regia solutions, respectively. The purified material was divided into two batches. The SWCNTs samples were dispersed in 1% SDS solution in ultrasound bath for 2 and 12 hours. Both dispersed SWCNTs samples were functionalized with p-aminobenzoic acid diazonium salt and fractionated via free solution electrophoresis method. Afterwards, the fractionated samples were recovered, purified from surfactant/functionalities by annealing and investigated via UV-Vis-NIR optical absorption spectroscopy (OAS). The efficiency of the fractionation process was estimated through the comparison of the van Hove singularities (vHS) presented in the obtained fractions to the starting SWCNTs.

Słowa kluczowe

EN

SWCNTs; diazonium salts; fractionation; electrophoresis

PL

SWCNTs; sole diazoniowe; frakcjonowanie; elektroforeza

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2011
• Tom: Vol. 13, nr 3
• Strony: 1--4
• Opis fizyczny: Bibliogr. 19 poz., rys.

Twórcy

autor

Scheibe B.

autor

Lukaszczuk P.

autor

Rümmeli M. H.

autor

Kalenczuk R. J.

autor

Borowiak-Palen E.

• West Pomeranian University of Technology Szczecin, Institute of Chemical and Environmental Engineering, ul. Pułaskiego 10, 70-322 Szczecin, Poland,

Bibliografia

• 1. Iijima, S. (1991). Helical microtubules of graphitic carbon. Nature 354, 56–58. doi:10.1038/354056a0.
• 2. Radushkevich, L.V. & Lukyanovich, V.M. (1952). The carbon structure formed by thermal decomposition of carbon monoxide on an iron contact. J. Phys. Chem. 26, 88–95.
• 3. Dresselhaus, M.S., Dresselhaus, G. & Saito, R. (1995). Physics of carbon nanotubes. Carbon 33(7), 883–891. DOI:10.1016/0008-6223(95)00017-8.
• 4. Terranova, M.L., Sessa, V. & Rossi, M. (2006). The Word of carbon nanotubes: An overview of CVD growth Methodologies. Chem. Vap. Deposition 12, 315–325. DOI: 10.1002/cvde.200600030.
• 5. Zhou, O., Shimoda, H., Gao, B., Oh, S., Fleming, L. & Yue, G-Z. (2002). Materials science of carbon nanotubes: Fabrication, integration, and properties of macroscopic structures of carbon nanotubes. Acc. Chem. Res. 35, 1045–1053 DOI: 10.1021/ar010162f.
• 6. Thien-Nga, L., Hernadi, K., Ljuboviæ, E., Garaj, S.& Forro, L. (2002). Mechanical purification of single-walled carbon nanotube bundles from catalytic particles. Nano Letters 2(12), 1349–1352. DOI: 10.1021/nl025740f.
• 7. Harutyunyan, A.R., Pradhan, B.K., Chang, J., Chen, G. & Eklund, P.C. (2002). Purification of single-wall carbon nanotubes by selective microwave heating of catalyst particles. J. Phys.Chem. B 106, 8671–8675. DOI: 10.1021/jp0260301.
• 8. Miyata, Y., Maniwa, Y. & Kataura, H. (2006). Selective oxidation of semiconducting single-walled carbon nanotubes by hydrogen peroxide. J. Phys. Chem. 110, 25–29. DOI: 10.1021/jp055692y.
• 9. Chattopadhyay, D., Galeska, I. & Papadimitrakopoulos, F. (2003). A route for bulk separation of semiconducting from metallic single-wall carbon nanotubes. J. Am. Chem. Soc. 125(11), 3370–3375. DOI: 10.1021/ja028599l.
• 10. Kim, W-J., Usrey, M.L. & Strano, M.S. (2007). Selective functionalization and free solution electrophoresis of singlewalled carbon nanotubes: separate enrichment of metallic and semiconducting SWNT. Chem. Mater. 19, 1571–1576. DOI: 10.1021/cm061862n.
• 11. Arnold, M.S., Green, A.A., Hulvat, J.F., Stupp, S.I.& Hersam, M.C. (2006). Sorting carbon nanotubes by electronic structure using density differentiation. Nature Nanotechnology 1, 60–65. doi:10.1038/nnano.2006.52.
• 12. Niyogi, S., Hu, H., Hamon, M.A, Bhowmik, P., Zhao, B., Rozenzhak, S.M., Chen, J., Itkis, M.E., Meier, M.S., & Haddon,R.C. (2001). Chromatographic purification of soluble singlewalled carbon nanotubes. J. Am. Chem. Soc. 123(4), 733–734. DOI: 10.1021/ja0024439.
• 13. Walkowiak, B. & Kochmańska, V. (2002). Opracowanie zbiorowe: Elektroforeza przykłady zastosowań (pp. 6–18). Warszawa, Amersham Biosciences.
• 14. Rümmeli, M.H., Löffler, M., Kramberger, C., Simon, F., Fülöp, F., Jost, O., Schönfelder, R., Grüneis, A., Gemming, T., Pompe, W., Büchner, B. & Pichler, T. (2007). Isotopeengineered single-wall carbon nanotubes; A key material for magnetic studies. J Phys. Chem. C 111 4094–4098. DOI: 10.1021/jp066798b.
• 15. Bahr, J.L., Yang, J., Kosynkin, D.V., Bronikowski, M.J., Smalley, R.E. & Tour, J.M. (2001). Functionalization of carbon nanotubes by electrochemical reduction of aryl diazonium salts: A bucky paper electrode. J. Am. Chem. Soc. 123, 6536–6542. DOI: 10.1021/ja010462s.
• 16. Miyata, Y., Yanagi, K., Maniwa, Y. & Kataura, H. (2008). Optical evaluation of the metal-to-semiconductor ratio of single wall carbon nanotubes J. Phys.Chem.112, 13187–13191. DOI: 10.1021/jp072359g.
• 17. Miyauchi, Y. & Maruyama, H. (2006). Identification of an excitonic phonon sideband by photoluminescence spectroscopy of single-walled carbon-13 nanotubes. Phys. Rev. B 74(3), 035415–035422. DOI: 10.1103/PhysRevB.74.035415.
• 18. Bahr, J.L. & Tour, J.M. (2001). Highly functionalized carbon nanotubes using in situ generated diazonium compounds. Chem. Mater. 13, 3823–3824. DOI: 10.1021/cm0109903.
• 19. Tanaka, T., Jin, H., Miyata, Y. & Kataura, H. (2008). High-yield separation of metallic and semiconducting singlewall carbon nanotubes by agarose gel electrophoresis. App. Phys. Exp. 1, 114001–114003. DOI: 10.1143/APEX.1.114001.