Synthesis of solid epoxy resins under microwave irradiation

• Autorzy: Bogdał D. , Górczyk J.
• Języki publikacji: EN

Abstrakty

EN

A new method of synthesis of high-molecular-weight epoxy resin (HMWER) with desired epoxy-groups content, according to so-called advancement" process was described. It is based on polyaddition of 4,4'-Isopropylidenediphenol (BPA) to a low-molecular-weight epoxy resin (LMWER) under microwave irradiation or conventional heating in the presence of catalyst. Microwave syntheses were carried out in a multi-mode reactor "Plazmatronika" (Poland) of microwave frequency 2.45GHz and maximal microwave power 300W. Analogical syntheses provided under conventional heating have been done for comparison of the methods. The results showed, that in tested group of catalysts shortening of the reaction time (for process conducted under microwave irradiation in comparison to conventional heating) is possible only for 2-methylimidazole.

Słowa kluczowe

EN

epoxy resins; microwave irradiation; polyaddition

PL

żywice epoksydowe; promieniowanie mikrofalowe; poliaddycja

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2003
• Tom: Vol. 5, nr 3
• Strony: 88--89
• Opis fizyczny: Bibliogr. 17 poz., tab.

Twórcy

autor

Bogdał D.

autor

Górczyk J.

• Department of Polymer Chemistry and Technology, Cracow University of Technology, Warszawska 24, 31-155 Kraków, Poland, tel/fax: [phone],

Bibliografia

• (1) Brojer Z., Hertz Z., Polimery, 1974, 19, 569.
• (2) Czub P., Bończa-Tomaszewski Z., Penczek P., Pielichowski J., Chemia i technologia żywic epoksydowych, WNT, Warszawa, 2002.
• (3) Bryan E. (Editor), Chemistry and technology of epoxy resins, Chapman and Hall, London, 1994.
• (4) Kielska B., Polimery, 1980, 25, 265.
• (5) Brojer Z., Polimery, 1980, 25, 205.
• (6) Csillag L., AntaII., Dolp H. R., Polimery, 1974, 19, 578.
• (7) Penczek P., Rejdych J., Polimery, 1986, 31, 81.
• (8) Rejdych J., Szczepaniak B., Polimery, 1982, 27, 236.
• (9) Alvey F.B., J. Appl. Polym. Sci., 1969, 13, 1473.
• (10) Penczek P., Szczepaniak B., Acta Polym., 1991, 42, 112.
• (11) US Pat. 2992239 (1961).
• (12) US Pat. 2694694 (1954).
• (13) Perreux L., Loupy A., Tetrahedron, 2001, 57, 9199.
• (14) Loupy A., et al., Synthesis, 1998, 1213.
• (15) Bogdal D., Wiad. Chem., 1999, 53, 66.
• (16) Deshayes S., Liagre M., Loupy A., Luche J.L., Petit A., Tetrahedron, 1999, 55, 10851.
• (17) Bogdal D., Pielichowski J., Penczek P., Górczyk J., Kowalski G., Polimery, 2002, 47, 90.