Influence of surface treatment on the wetting process of jute fibres with thermosetting polyester resin

• Autorzy: Bogdan-Włodek A. , Kozioł M. , Myalski J.
• Języki publikacji: EN

Abstrakty

EN

The aim of this study is the evaluation of the effect of chemical treatment of jute fibres on their permeability with polyester resin and determination of optimal treatment parameters. Unmodified jute fabric by LENTEX, Poland and polyester resin ESTROMAL 14 were used in the experiments. NaOH and KOH water solutions (various concentration - from 1 to 15% - and treatment duration - from 0.5 to 6h), vinyl acetate, methanol, toluene diizocyanate were used for the treatment. Determination of the effect of the chemical treatment on fiber-resin interaction was made in: infiltration of resin into reinforcement structure tests and fabric absorbability tests. Three criteria: time of penetration of resin into the reinforcing fabric, fabric absorbability and the area of a part of the specimen cross-section penetrated with the resin were taken into account. The fabrics treated with 1-5% - long-time and 15% short-time NaOH and KOH water solutions showed the best results within the tested criteria. These results do not correspondent directly with the mechanical properties of cured composites manufactured on the base of the treated fabrics. Alkali- and organic treatments significantly improve the mechanical performance of natural fibres reinforced composites, but organic treatments (methanol, toluene diisocyanate) gives better improvement in mechanical properties in comparison with the alkali-treatments. The measurement methods applied in the study may be generally useful in the evaluation of the effect of chemical treatment of natural fibres on their wettability with the liquid matrix.

Słowa kluczowe

EN

natural fibres; jute fibres; surface treatment; wetting prosess; fibre reinforced composites

PL

włókna naturalne; włókna juty; obróbka powierzchniowa; zwilżanie powierzchni; wzmocnione włókna kompozytowe

• Wydawca: West Pomeranian University of Technology. Publishing House
• Czasopismo: Polish Journal of Chemical Technology
• Rocznik: 2012
• Tom: Vol. 14, nr 1
• Strony: 21--27
• Opis fizyczny: Bibliogr. 17 poz., rys., tab.

Twórcy

autor

Bogdan-Włodek A.

autor

Kozioł M.

autor

Myalski J.

• Faculty of Materials Engineering and Metallurgy, Silesian University of Technology,

Bibliografia

• 1. Bledzki, A. & Gassan, J. (1999), Composites reinforced with cellulose fibres, Prog. Polymers. Sci., 24, 221–274
• 2. Khan, F. & Ahmad, S.R., (1996), Chemical modifi cation and spectroscopic analysis of jute fibre, Pol. Degr. and Satab., 52, 335–340.
• 3. Kalia, S., Kaith, B.S. & Kaur, I., (2009), Pretreatments of natural fibers and their application as reinforcing material in polimer composites: a review, Pol. Eng. and Sci., 49, 1253–1272, DOI: 10.1002/pen.21328.
• 4. Sticchi, A. & Lauke, B., (2007), A novel fiber treatment applied to woven jute fabric/ vintlester laminates, Comp.: Part A, 38, 1337–1343, DOI: 10.1016/j.compositesa.2006.10.010.
• 5. Pietak. A., Korte. S., Tan. E., Downard. A. & Staiger. M.P., (2007), Atomic force microscopy characterization of the surface wettability of natural fibres, Appl. Surf. Sci., 253, 3627–3635, DOI: 10.1016/j.apsusc.2006.07.082.
• 6. Sinha, E., Rout, S.K., (2009), Infl uence of fi bre-surface treatment on structural, thermal and mechanical properties of jute fibre and its composite, Bull. Mater. Sci., 1, 65–76.
• 7. van de Weyenberg, I., Chitruong, T., Vangrimde, B. & Verpoest, I., (2006), Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment, Comp.: Part A, 37, 1368–1376, DOI: 10.1016/j.compositesa.2005.08.016.
• 8. Qin, C., Soykeabkaew, N., Xiuyuan, N. & Pejs, T., (2008), The effect of fiber volume fraction and mercerization on the properties of all – cellulose composites, Carboh. Pol., 71,458–467, DOI: 10.1016/j.carbpol.2007.06.019.
• 9. Gassan, J., (1997), Natural fiber reinforced plastics – Correlation between structure and properties of the fibers and the resultat composites, Unpublished doctoral dissertation, University of Kassel, Kassel, Germany.
• 10. Manisikkamaki, P., Lahtinen, M. & Rissanen, K., (2007), The conversion from cellulose I to cellulose II In NaOH mercerization performer in alcohol water system: X – Ray powder diffraction study, Carboh. Pol., 68, 35–43, DOI: 10.1016/j. carbpol.2006.07.010.
• 11. Podgorski, L., Chevet, B., Onic, L. & Merlin, A.H., (2000), Modification of wood wettability by plasma and corona treatments, Int. Jour. of Adh. & Adh., 20, 103–111.
• 12. Topalovic, T., Nierstrasz, V.A., Bautista, L., Jocic, D., Navarro, A., Warmoeskerken, M.M.C.G., (2007), XPS and contact angle study of cotton surface oxidation by catalytic bleaching, Coll. and Sur. A: Phys. Eng. Asp., 296, 76–85, DOI: 10.1016/j.colsurfa.2006.09.026.
• 13. Corrales, F., Vilaseca, F., Llop, M., Girones, J., Mendez, J. A., Mutj, P., (2007), Chemical modification of jute fibers for the production of green-composites, J. of Haz. Mat., 144, 730–735, DOI: 10.1016/j.jhazmat.2007.01.103.
• 14. Karmakar, S.R. (1999), Chemical technology in the pre–treatment processes of textiles, Elsevier Science & Technology, Netherlands.
• 15. Ray, D., Das, M. & Mitra, D. (2009), Influence of alkali – treatment on creep properties and crystallity of jute fibers, Bioresources, 4, 730–739.
• 16. Gassan, J. & Bledzki, A., (1999), Alkali treatment of jute fibers: relationship between structure and mechanical properties, J. of Appl. Pol. Sci., 71, 623–629.
• 17. Mwaikambo, L.Y. & Ansell, M.P., (1999), The effect of chemical treatment on the properties of hemp, sisal, jute and kapok fibers for composite reinforcement, 2nd International Wood and Natural Fibre Composites Symposium, 28–29 June 1999 (pp. 41–46). Kassel, Germany.