Modelowanie 3D prądnicy ze wzbudzeniem hybrydowym

• Autorzy: Dukalski P. , Gawron S. , Bernatt J.

Warianty tytułu

EN

Modeling 3D of generator with hybrid excitation

• Języki publikacji: PL

Abstrakty

EN

This article describes simulation problems of hibrit excitation generator. As an example a conceptual prototype machine is build with two parts. One part of the machine is typical permanent magnets generator (with sphere magnets on rotor). The second part of the machine has rotor with rotating-armature excitation. Both parts are integrated. Rotors are seated on common shaft and stator is common (the same) on whole lenght of both rotors. Article shows problems of teoretical solving electromagnetic circuit of this type machines. Main problem is regulating of excitation flux what gives directly problem with valuation of inducted voltage and power factor. There are two different methods used by authors in examine prototype of hybrid generator. The most efficient method is FEM based on 3D model made by Ansoft Maxwell program. In this article autors present modeled generator with pictures of intersections in different planes. Authors compare solutions received from the two methods with results of laboratory tests which were made on real model.

Słowa kluczowe

PL

maszyna elektryczna; prądnica; wzbudzenie hybrydowe; modelowanie 3D

• Wydawca: Sieć Badawcza Łukasiewicz - Górnośląski Instytut Technologiczny
• Czasopismo: Maszyny Elektryczne : zeszyty problemowe
• Rocznik: 2011
• Tom: Nr 3(91)
• Strony: 199--204
• Opis fizyczny: Bibliogr. 20 poz., rys., tab.

Twórcy

autor

Dukalski P.

autor

Gawron S.

autor

Bernatt J.

• BOBRME Komel, Katowice,

Bibliografia

• [1]. Glinka T.: „Electrical machines excited with permanent magnets”, copyright by Silesian University of Technology, Poland, Gliwice 2002 r.
• [2]. Bernatt J.: „Electrical and magnetic circuits of electrical machines excited with permanent magnets”, copyright by Research And Development Centre Of Electric Machines „Komel”, Poland, Katowice 2010 r.
• [3]. Parviainen A.: „Design of axial-flux permanent magnet low-speed machnes and performance comparison between radial-flux and axialflux machnes”, Lappeenranta University of Technology, Finland 2005.
• [4]. Gieras J.F., Wing M.: „Permanent Magnet Motor Technology Disign and Applications”, second edition, Marcel Dekker INC, New York 2002.
• [5]. Rossa R., Kr E.: “Modern electric machines with permanent magnet”. Przegląd Elektrotechniczny (Electrical Review) nr 12/2008, str. 12-17.
• [6]. Bernatt J., Gawron S., „Problemy projektowania i konstrukcji maszyn wzbudzanych magnesami trwałymi” Jubileusz 90 – lecia Akademii Górniczo-Hutniczej Materiały Konferencyjne, str.23-26.
• [7]. Bernatt J., Gawron S. Król E.: „Zastosowania trakcyjne nowoczesnych silników z magnesami trwałymi”, Przegląd Elektrotechniczny (Electrical Review) nr 12/2009.
• [8]. Bernatt J., Gawron S., Król E.: „Small windmills – construction and exploitation experience”, copyright by Research And Development Centre Of Electric Machines „Komel”, Poland, Katowice, ZP-M E No 72/2005.
• [9]. Gawron S.: „Permanent magnet synchronous generator with low output voltage variability”, copyright by Research And Development Centre Of Electric Machines „Komel”, Poland, Katowice, ZP-M E No 84/2009.
• [10]. Bernatt J., Gawron S.: „New construction of 2-pole permanent magnet synchronous generator”, copyright by Research And Development Centre Of Electric Machines „Komel”, Poland, Katowice, ZP-M E No 88/2010.
• [11]. GAWRON S.: „Prądnica synchroniczna wzbudzana magnesami trwałymi z możliwością dowzbudzania”. Przegląd Elektrotechniczny nr 01/2008, str. 50-53.
• [12]. BERNATT J., GAWRON S.: „The synchronous generator with permanent magnets and excitation Winding”, XIX International Conference on Electrical Machines 2010; Mater. Konf. ISBN: 978-1-4244-4174-7 IEEE Xplore Digital Library.
• [13]. Kapinos J.: „Synchronous generator with hybrid excitation”. XV International Symposium on Electric Machinery in Prague, ISEM'2007, 5-6 Sep 2007, Prague, pp.72-79.
• [14]. Zhang Hongjie, Li Qingfu: „Theory and Desing of Hybrid Excitation Permament Magnet Synchronous Generators”. IEEE ICEMS 2001, vol.2, pp898-900, 2001.
• [15]. Chao-hui Zhao, Yang-guang Yan: „A Review of Development of Hybrid Excitation Synchronous Machne”. IEEE ISIE 2005, pp857-862, 20-23 June 2005.
• [16]. Zhuoran Zhang, Yangguang Yan, Shanshui Yang, Zhou Bo, „Principle of Operation and Feature Investigation of a New Topology of Hybrid Excitation Synchronous Machine”, IEEE Transactions on Magnetics, vol. 44, NO. 9, September 2008.
• [17]. Qi Zhang, Surong Huang, Xuanming Ding, „Hybrid Excitation Machine with Isolated Magnetic Paths" Proceeding of the CSEE 2009, 29 (18) 106-112.
• [18]. Paweł Hańczewski, Włodzimierz Przyborowski, „Przegląd konstrukcji maszyn synchronicznych o wzbudzeniu hybrydowym z kolektorową strukturą magnesów trwałych", Proceedings of XL International Sympodium on Electrical Machines SME'2004, 15-18 June, Hajnowka, Poland.
• [19]. E. Spooner, S.A.W. Khatab, N.G. Nicolau, „Hybrid Excitation of AC and DC Machines" Proc. IEE EMD 1989 Conf., pp. 48–52.
• [20]. Muhammad H. Rashid, “Power Electronics Handbook, Second Edition: Devices, Circuits and Applications”, Academic Press; 2 editiod, November 22, 2006.