PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wskaźniki diagnostyczne dla układów napędowych z nieliniowymi regulatorami prądu

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Diagnostic factors for motor drives with non-linear current controllers
Języki publikacji
PL
Abstrakty
EN
For squirrel-cage motor diagnostics, methods based on stator current FFT analysis are mainly used. Those algorithms knowledge about basic supplying voltage harmonic frequency of the supplying source. With inverter-fed motors, they can be used only in simple configurations using scalar U/f = const control methods. In the case of algorithms based on angular speed and flux estimators, usage of the same diagnostic methods is disputable. State estimation factors practically realized as procedures built in the control algorithms are presented in the paper. Choice of the factors had been supported by the laboratory test results of voltage inverter-fed motors using DTC and DFOC control methods. Realized tests indicate usefulness of presented solutions for cases of rotor cage damages and static rotor eccentricity.
Rocznik
Tom
Strony
5--10
Opis fizyczny
Bibliogr. 17 poz., rys., tab.
Twórcy
autor
Bibliografia
  • [1]. Bose B. K.: Power electronics and variable frequency drives. IEEE Press, New York, 1997.
  • [2]. Habetler T. G., Profumo F., Pastorelli M., Tolbert L. M.: Direct torque control of induction machines using space vector modulation, IEEE Transactions on Industry Applications, Vol. 28, No. 5, Sep/Oct 1992, s. 1045-1053.
  • [3]. Jansen P. L., Lorenz R. D.: A physically insightful approach to the design and accuracy assessment of flux observers for field oriented induction machines driver, proc. IEEE-IAS Annual Meet., 1992, p. 570-577.
  • [4]. Kaźmierkowski M.P., Blaabjerg F., Krishnan R.: Control In Power Electronics – Selected Problems, Academic Press, USA, 2002.
  • [5]. Krzemiński Z.: Cyfrowe sterowanie maszynami asynchronicznymi, Wydawnictwo Politechniki Gdańskiej, Gdańsk, 2001.
  • [6]. Orłowska - Kowalska T.: Bezczujnikowe układy napędowe z silnikami indukcyjnymi, oficyna Wydawnicza Politechniki Wrocławskiej, Wrocław 2003.
  • [7]. Sikorski A, Korzeniewski M.: Porównanie właściwości trójpoziomowego przekształtnika DC/AC sterowanego metodami DTC-ST i DTCSVM, Przegląd Elektrotechniczny nr 6, 2008, s. 117-120.
  • [8]. Sikorski A, Ruszczyk A, Korzeniewski M., Kaźmierowski M. P, Antoniewicz P., Kołomyjski W., Jasiński M.: Porównanie właściwości metod bezpośredniej regulacji strumienia i momentu (DTC-SVM, DTC-δ, DTC-2x2), VII Krajowa Konferencja Naukowa "Sterowanie w Energoelektronice i Napędzie Elektrycznym", Łódź, 2007, s. 427-432.
  • [9]. Sikorski A., Korzeniewski M.: Possibilities of torque and flux control using DTC-d method, Electronics, Vol.7, No 2, 2003, s. 95-99.
  • [10]. Sikorski A.: Bezpośrednia regulacja momentu i strumienia silnika indukcyjnego. Oficyna Wydawnicza Politechniki Białostockiej, Białystok 2009.
  • [11]. Sołbut A.: Calculation of squirrel-cage motor inductances including rotor eccentricity. Archives of Electrical Engeneering, VOL.LVII, No.3-4,2009, pp.157-169
  • [12]. Sołbut A.: Modelowanie numeryczne wybranych algorytmów diagnostycznych maszyn asynchronicznych, Zeszyty Problemowe „Maszyny Elektryczne” nr.77(2007) s. 15-18
  • [13]. Sołbut A.: Ocena stanu układu napędowego sterowanego metodą orientacji wektora pola, Zeszyty Problemowe „Maszyny Elektryczne” nr 80/2008, s.5-9
  • [14]. Sołbut A.: Squirrel-cage motor drive dynamics modeling including chosen damages – program tools. Archives of Electrical Engeneering, VOL.LVII, No.3-4, 2010
  • [15]. Sołbut A.: Zalety zastosowania sygnału skutecznej ruchomej prądu w diagnostyce maszyny asynchronicznej zasilanej z falownika napięcia, Zeszyty Problemowe „Maszyny Elektryczne” nr.74(2006), s.109-114.
  • [16]. Sołbut Adam, Wybrane algorytmy diagnostyki układu napędowego z falownikami napięcia, Zeszyty Problemowe „Maszyny Elektryczne” nr.86/2010, s.35-40.
  • [17]. Żelechowski M., Kaźmierowski M. P., Blaabjerg F.: Controller design for direct torque controlled space vector modulated (DTC-SVM) induction motor drives, IEEE ISIE 2005, Dubrownik, Croatia, s. 951-956.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0061-0002
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.