Kształtowanie parametrów mechanicznych wybranych przędz komponentowych łączonych pneumatycznie. Cz. II

• Autorzy: Swaczyna P. , Dopierała H.
• Języki publikacji: PL

Abstrakty

EN

Pneumatic interlacing is presently applied only to filament yarns. Research work carried out at Textile Research Institute in Lodz covers the technology of pneumatic interlacing of yarns with staple yarns contribution and research on the structure and properties of new yarns in relation to parameters of pneumatic interlacing process. This publication presents: results of studies on the effects of selected technological factors in the formation of mechanical parameters of component yarns, formed by innovative, highly efficient air interlacing technology, and the outline of the relations between the structure of yarn formed in air interlacing process (carried out at changing parameters of the technological process), and the level of analized mechanical parameters of the new yarns generation.

Słowa kluczowe

PL

przędza; wytrzymałość przędzy; siła zrywająca; formowanie przędzy

• Wydawca: Wydawnictwo SIGMA-NOT
• Czasopismo: Przegląd Włókienniczy - Włókno, Odzież, Skóra
• Rocznik: 2010
• Tom: nr 10
• Strony: 28--31
• Opis fizyczny: Bibliogr. 4 poz., rys., tab.

Twórcy

autor

Swaczyna P.

autor

Dopierała H.

• Instytut Włókiennictwa w Łodzi

Bibliografia

• 1. P. Swaczyna, H. Dopierała, D. Cyniak, Highly efficient air interlacing as the way of forming connected yarns, staple yarns and composite yarns (staple - filament). 10th Scientific Conference - Faculty of Textile Engineering and Marketing, Technical University of Łódź (PŁ), 2007.
• 2. Swaczyna P., Dopierała H., The evaluation of effects of linking filament-staple yarns according to pneumatic interlacing technique, 12th Scientific Conference - Faculty of Material Technologies and Textile Design, Technical University of Łódź (PŁ), 2009.
• 3. W. Ankudowicz, H. Dopierała, C. Radom, P. Swaczyna, Linking Yarns From Staple and Filament Fibres by High-Efficiency Pneumatic Interalcing. Port I: Factors Influencing the Linking Effect and the Properties of Interlaced Yarns. Analysis of Tensile Strength Parameters, Fibres & Textiles in Eastern Europe, 1/2008.
• 4. W. Ankudowicz, H. Dopierała, C. Radom, P. Swaczyna, Linking Yarns from Staple and Filament Fibres by High-Efficiency Pneumatic Interlacing. Part II: Analysis of Hairiness, Number of Faults and Estimation of the Linking Effects, Fibres & Textiles in Eastern Europe, 2/2008.