Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
- Sesja wygasła!
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This paper deals with 3D scanning in power electrical engineering. Specifically, using a scanner company Z800 Z-Corporation. This scanner was used to diagnose the structure of the electric machine coil. After taking all necessary steps to create 3D models from scanned data the model was obtained. This model was compared with the model that was created in one of modern CAD systems. This model made for the primary model for the production of measured coil. The variations in the construction of a coil were identified. Subsequent analysis identified the causes of changes in dimensions.
Czasopismo
Rocznik
Tom
Strony
157--160
Opis fizyczny
Bibliogr. 6 poz., rys., tab.
Twórcy
autor
autor
- Department of Power Electrical and Electronic Engineering, Faculty of electrical engineering and communications, Brno University of Technology, Technicka 8, Brno 616, Czech Republic, janda@feec.vutbr.cz
Bibliografia
- [1] http://www.bibus.cz/cz/?pg=vypis-produktu &id=125
- [2] H. Li, B. Adams, L. J. Guibas. Robust Single-View Geometry and Motion Reconstruction. ACM SIGGRAPH Asia Conference 2009 Yokohama, JAPAN, DEC 16-19, 2009
- [3] T. Nouri, L. Pflug. Real time 3D scanner: investigations and results. Proceedings of SPIE, 260 p., December 1998, ISBN: 9780819412379
- [4] https://www.nextengine.com/indexSecure.htm
- [5] http://www.zcorp.com/en/Products/3DScanners
- [6] K. Ohno et al. R Development of 3D laser scanner for measuring uniform and dense 3D shapes of static objects in dynamic environment. Robotics and Biomimetics, 2008. ROBIO 2008. IEEE International Conference on Digital Object Identifier, Page(s): 2161 - 2167
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0056-0087