PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Porównanie dwóch wariantów zasilania silnika bezszczotkowego

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Comparison of two different supply variants of a BLDC motor
Języki publikacji
PL
Abstrakty
EN
Two alternative methods of supply and speed control of BLDC motor are presented in the paper. The motoe is supplied via electronic commutator, which calculated rotor position on the basis of signals received from Hall sensors. The system consists of transistor bridge connecting the supply voltage to the motor windings in accordance with control sequence. The bridge is controlled by microprocessor, which works out the control basing on rotor position signals and motor input current value. In the first supply variant motor's average winding voltage is controlled via pulse width modulation of supply voltage (this is done by electronic commutator). In the second supply variant the system is supplemented with power electronics converter, decreasing electronic commutator supply voltage, so that the commutator is controlled on the basis of rotor position sensors only (with no pulse width modulation). The possibility of decreasing supply voltage (average value) of the BLDC motor allows smooth regulation of motor speed.
Rocznik
Tom
Strony
53--55
Opis fizyczny
Bibliogr. 3 poz., rys.
Twórcy
autor
autor
  • Politechnika Śląska w Gliwicach, Wydział Elektryczny, Instytut Elektrotechniki Przemysłowej i Informatyki, Zakład Inżynierii Elektrycznej w Transporcie, ul. Akademicka 10, 44-100 Gliwice, Andrzej.Sikora@polsl.pl
Bibliografia
  • [1]. Glinka T.: Electric motors with permanent magnets. Przegląd Elektrotechniczny, PL ISSN 0033-2097, nr 7/2008, str. 1 – 7.
  • [2]. Bernatt J., Glinka T., Król E., Rossa R.: Electric Motors with Permanent Magnets. ICRM 2008. IEEE Catalog Number: CFP0890B-CDR. ISBN: 978-1-4244-1736-0. Library of Congress Number: 2007906913. Poz.58.
  • [3]. Sikora A., Zielonka A.: Napęd łodzi motorowej z wykorzystaniem silnika bezszczotkowego zasilanego poprzez komutator elektroniczny. Napędy i Sterowanie ISSN 1507-7764, nr 2’2010 str.46-48.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0056-0010
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.