Nowy rodzaj lakieru domieszkowany nanocząstkami SiO2

• Autorzy: Nguyen M.Q. , Malec D. , Mary D. , Werynski P. , Gornicka B. , Therese L. , Guillot Ph.

Warianty tytułu

EN

New kind of varnish filled with SiO2 nanoparticles

• Języki publikacji: PL

Abstrakty

EN

The dielectric and mechanical properties of standard (PEI), nanoscale-filled and microscale-filled varnishes are detailed and analyzed in this communication. Two kind of silica (10 nm and 400 nm) have been tested as a filler. A particular attention has been paid to Partial Discharge Inception Voltage, lifetime under pulse voltage and bonding strength which are crucial for varnish to be used in rotating machines fed by inverters.

Słowa kluczowe

PL

lakiery; krzemionka; nanonapełniacze; właściwości dielektryczne

• Wydawca: Sieć Badawcza Łukasiewicz - Górnośląski Instytut Technologiczny
• Czasopismo: Maszyny Elektryczne : zeszyty problemowe
• Rocznik: 2009
• Tom: Nr 84
• Strony: 211--216
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Nguyen M.Q.

autor

Malec D.

autor

Mary D.

autor

Werynski P.

autor

Gornicka B.

autor

Therese L.

autor

Guillot Ph.

• Instytut Elektrotechniki, ul. Pożaryskiego 28, 04-703 Warszawa,

Bibliografia

• [1] Irwin P.C.: Characterization of commercial corona resistant magnet wire enamels using nanoindentation techniques, Proceeding on Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, pp. 105-107, 2003
• [2] Kikuchi H., Yukimori Y., Itonaga S.: Inverter surge resistant enameled wire based on nanocomposite insulating material, Hitachi Cable Review, 21, pp. 55-62, 2002
• [3] Weijun Y., Bultemeier K., Barta D., Floryan D.: Improved magnet wire for inverter-fed motors, Proceeding on Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, pp. 379-382, 1997
• [4] Kozako M., Fuse N., Ohki Y., Okamoto T., Tanaka T.: Surface Degradation of Polyamide Nanocomposites Caused by Partial Discharge using IEC (b) Electrodes, IEEE Trans. Dielectr. Electr. Insul., Vol. 11, pp. 833-838, 2004
• [5] Sherman L.M.: Nanocomposites: a little goes a long way, Plastic Technology, June, pp. 52-57, 1999
• [6] Hancock M., Rothon R.: Principal types of particulate fillers, Particulate-filled polymer composites, Rothon R. Essex Edition, pp. 47-87, 1995
• [7] Chow T.S.: The effect of particle shape on the mechanical properties of filled polymers, Jour. Mat. Sci., Vol. 15, pp. 1873-1888, 1980
• [8] Ahmed S., Jones F.R.: A review of particulate reinforcement theories for polymer composites, Jour. Mat. Sci., Vol. 25, no.12, pp. 4933-4942, 1990
• [9] Gao Z., Tsou A.H.: Mechanical properties of polymers containing fillers, Jour. Polym. Sci., Vol. 37, pp. 155-172, 1999
• [10] Pukanszky B., Fekete E.: Adhesion and surface modification, Adv. Polym. Sci., Vol. 139, pp. 109-153, 1999
• [11] Kerner E.H.: The elastic and thermo-elastic properties of composite media, Proc. Phys. Soc., Vol. 69B, pp. 808-813, 1956
• [12] Moloney A.C., Kausch H.H., Kaiser T., Beer H.R.: Review: parameters determining the strength and toughness of particulate filled epoxide resins, Jour. Mat. Sci., Vol. 22, pp. 381-393, 1987
• [13] Anderson D.P., Besnon Tolle T.: Composite property enhancement with nanoscale inorganic fillers, Proceeding of the ACS National Meeting PMSE., pp. 220-221, 2000