Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
New kind of varnish filled with SiO2 nanoparticles
Języki publikacji
Abstrakty
The dielectric and mechanical properties of standard (PEI), nanoscale-filled and microscale-filled varnishes are detailed and analyzed in this communication. Two kind of silica (10 nm and 400 nm) have been tested as a filler. A particular attention has been paid to Partial Discharge Inception Voltage, lifetime under pulse voltage and bonding strength which are crucial for varnish to be used in rotating machines fed by inverters.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
211--216
Opis fizyczny
Bibliogr. 13 poz., rys.
Twórcy
autor
autor
autor
autor
autor
autor
autor
- Instytut Elektrotechniki, ul. Pożaryskiego 28, 04-703 Warszawa, p.werynski@iel.waw.pl
Bibliografia
- [1] Irwin P.C.: Characterization of commercial corona resistant magnet wire enamels using nanoindentation techniques, Proceeding on Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, pp. 105-107, 2003
- [2] Kikuchi H., Yukimori Y., Itonaga S.: Inverter surge resistant enameled wire based on nanocomposite insulating material, Hitachi Cable Review, 21, pp. 55-62, 2002
- [3] Weijun Y., Bultemeier K., Barta D., Floryan D.: Improved magnet wire for inverter-fed motors, Proceeding on Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology Conference, pp. 379-382, 1997
- [4] Kozako M., Fuse N., Ohki Y., Okamoto T., Tanaka T.: Surface Degradation of Polyamide Nanocomposites Caused by Partial Discharge using IEC (b) Electrodes, IEEE Trans. Dielectr. Electr. Insul., Vol. 11, pp. 833-838, 2004
- [5] Sherman L.M.: Nanocomposites: a little goes a long way, Plastic Technology, June, pp. 52-57, 1999
- [6] Hancock M., Rothon R.: Principal types of particulate fillers, Particulate-filled polymer composites, Rothon R. Essex Edition, pp. 47-87, 1995
- [7] Chow T.S.: The effect of particle shape on the mechanical properties of filled polymers, Jour. Mat. Sci., Vol. 15, pp. 1873-1888, 1980
- [8] Ahmed S., Jones F.R.: A review of particulate reinforcement theories for polymer composites, Jour. Mat. Sci., Vol. 25, no.12, pp. 4933-4942, 1990
- [9] Gao Z., Tsou A.H.: Mechanical properties of polymers containing fillers, Jour. Polym. Sci., Vol. 37, pp. 155-172, 1999
- [10] Pukanszky B., Fekete E.: Adhesion and surface modification, Adv. Polym. Sci., Vol. 139, pp. 109-153, 1999
- [11] Kerner E.H.: The elastic and thermo-elastic properties of composite media, Proc. Phys. Soc., Vol. 69B, pp. 808-813, 1956
- [12] Moloney A.C., Kausch H.H., Kaiser T., Beer H.R.: Review: parameters determining the strength and toughness of particulate filled epoxide resins, Jour. Mat. Sci., Vol. 22, pp. 381-393, 1987
- [13] Anderson D.P., Besnon Tolle T.: Composite property enhancement with nanoscale inorganic fillers, Proceeding of the ACS National Meeting PMSE., pp. 220-221, 2000
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0052-0072