PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Projektowanie mikrosilnika z fazą zwartą z wykorzystaniem metody polowej

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Shaded-pole micromotor design using the field calculation method
Konferencja
Problemy eksploatacji maszyn i napędów elektrycznych (2009; Rytro, Polska)
Języki publikacji
PL
Abstrakty
EN
Analysed object is an induction micromotor with a short-circuited auxiliary phase (shaded-pole micromotor - SPM). The motor rating data are: output power 3 W, two poles, one short-circuited coil per pole. Due to flat – parallel distribution of the field and radial direction of flux in SPM, the computational analysis was limited to the cross section plane. Field calculations were done with OPERA 2d software, using finite element method. Basing of numerical simulations several models of the SPM motor have been defined. They were different in: topology of the magnetic shunt, the number of short-circuited coils per pole, also the number and shape of rotor’s rods. Taking into account the manufacture conditions of the SPM motor, the shunt set up and geometry were proposed. The optimal solution of motor’s magnetic circuit with the largest value of flux density in air gap and also the largest starting torque has been achieved basing on fixed overall dimensions.
Słowa kluczowe
Rocznik
Tom
Strony
111--115
Opis fizyczny
Bibliogr. 5 poz., rys., tab.
Twórcy
autor
  • Zakład Trakcji Elektrycznej w Instytucie Elektroenergetyki Politechniki Łódzkiej, ul. Stefanowskiego 18/22, 90-924 Łódź, jan.anuszczyk@p.lodz.pl
Bibliografia
  • [1] Anuszczyk J., Błaszczyk P.: Modelling of shaded pole induction motor’s magnetic circuit using field calculations. Proceedings of 12th ISEF’2005, Paper No.EE-2.5, Baiona, Spain, 2005.
  • [2] Anuszczyk J., Błaszczyk P.: Optimization of shaded pole micromotor using field calculations and evolutionary algorithms. Proceedings of 20th EPNC’2008, Paper No.75, Lille, France, 2008.
  • [3] Makowski K.: Jednofazowe silniki indukcyjne z pomocniczym uzwojeniem zwartym w ujęciu obwodowo – polowym. Prace Naukowe IMNPE. Oficyna Wydawnicza PWr, Wrocław, 2000.
  • [4] OPERA 2d. : Vector Fields Limited 24 Bankside. Kidlington Oxford OX5 1JE, England, 2006.
  • [5] Zhou S., Rajanathan C., Sapeluk A., Ozvern C.: Finite-Element-Aided design optimization of a shaded-pole induction motor for maximum starting torque. IEE Transactions on Magnetics, Vol. 36, No. 5, 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0051-0079
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.