PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Składowa zerowa prądu w układzie elektrowni wiatrowej z generatorem synchronicznym z magnesami trwałymi

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Zero current component in the wind power plant with permanent magnet synchronous generator
Konferencja
Problemy eksploatacji maszyn i napędów elektrycznych (2008; Rytro, Polska)
Języki publikacji
PL
Abstrakty
EN
In the rotating electrical machines working with transistorized converters common mode (CM) voltage current appears. The reasons of the CM voltage appearing are inner properties of the transistors control algorithms. When the CM voltage exists the CM current can flow through parasitic capacitance of the electrical machines and converters. Part of that current flows through motor bearing and strongly decreases bearing life. Example of power electronics drive is wind generator system. In the wind generator system two converters are used: machine inverter and grid inverter. In the presented system the permanent magnet synchronous generator (PMSG) was used. For PMSG efficient control the position of the rotor should be known. In the realized drive to eliminate position sensors the sensorless control method was implemented. During realization of the sensorless control the problem with the measurements of the machine voltage appeared. The measured voltage was strongly disturbed by flow of the common mode current. To solve that problem the path the high impedance for CM path was inserted. Two solutions: zero component choke and three-phase transformer applied between the generator drive system and the electric grid were tested. In the paper the CM voltage theory is presented. The results of the experimental investigations are presented.
Rocznik
Tom
Strony
23--28
Opis fizyczny
Bibliogr. 7 poz., rys., tab.
Twórcy
autor
autor
  • Politechnika Gdańska, Katedra Automatyki Napędu Elektrycznego, ul. Narutowicza 11/12, 80-952 Gdańsk, j.guzinski@ely.pg.gda.pl
Bibliografia
  • [1]. Muetze A., Binder A.: High frequency stator ground currents of inverter-fed squirrel-cage induction motors up to 500 kW. EPE, Tuluza, Francja, 2003.
  • [2]. Krzemiński Z., Bogalecka E.: Generowanie składowej zerowej w trójfazowym falowniku napięcia. Przegląd Elektrotechniczny, Nr 2, 2000.
  • [3]. Krzemiński Z.: Zastosowanie filtrów składowej zerowej do ograniczania napięć i prądów współbieżnych. Projektowanie, budowa, eksploatacja instalacji i urządzeń elektroenergetycznych oraz certyfikacja wyrobów. Gdańskie Dni Elektryki 2004, 17-18.11.2004, 85 lat SEP, Oddz. Gdański SEP Gdańsk: 2004.
  • [4]. Guziński J., Krzemiński Z.: Filtr wyjściowy falownika napięcia. Miesięcznik techniczno - informacyjny Napędy i Sterowanie. Nr 4 (75) - Kwiecień 2005.
  • [5]. Guziński J.: Filtr wyjściowy falownika napięcia. 5 Krajowa Konferencja Postępy w Elektrotechnice Stosowanej PES-5. 20-24 czerwca 2005, Kościelisko.
  • [6]. Zitselsberger J., Hofmann W.: Reduction of Bearing Currents by using Asymmetric, Space-Vector-Based Switching Patterns. Konferencja EPE, Tuluza, Francja, 2003.
  • [7]. Nowacki Z.: Modulacja szerokości impulsów w napędach przekształtnikowych prądu przemiennego. PWN, Warszawa, 1991.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0048-0048
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.