Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Comparative study of the shaft voltages in different large power induction motors
Konferencja
Problemy eksploatacji maszyn i napędów elektrycznych (2008; Rytro, Polska)
Języki publikacji
Abstrakty
The paper presents results of researches aimed at bearing faults detection in the high power induction motors. In chapter 2 are presented the causes of shaft voltages and bearing currents forming. The figure 1 shows the graphical presentation of the bearing currents forming issue. In the chapter 3, on the figures from 2 to 10 are shown different kinds of bearing damages arising in considered motors. In the chapter 4 is presented description of laboratory stand. The figure 12 presents diagram of measuring system. In the chapter 5 is presented influence of supply voltage unbalance on the value of shaft voltages. In the chapter 6 waveforms of shaft voltages, and their Fourier transforms are shown in Fig. 16, 17. Conclusions drawn from laboratory researches are presented in chapter 8.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
117--125
Opis fizyczny
Bibliogr. 8 poz., rys., tab.
Twórcy
autor
autor
autor
autor
autor
- Katedra Maszyn i Urządzeń Elektrycznych Politechniki Śląskiej, ul. Akademicka 10a, 44-100 Gliwice, Bronislaw.Drak@polsl.pl
Bibliografia
- [l].Drak B., Zientek P., Niestrój R., Kwak J.: Uszkodzenia łożysk w silnikach indukcyjnych użytych w organach urabiających kombajnów górniczych. Zeszyty Problemowe-Maszyny Elektryczne, nr. 75/2006, ss. 137-146.
- [2]. Donner G., Oakes B.K., Evon S.T.: Motor Primer - Part III. IEEE Trans On Ind. Appl., Vol. 39, No. 5, September/October 2003, pp. 1467-1474.
- [3]. Drak B., Zientek P., Niestrój R., Kwak J.: Napięcia i prądy wałowe w silnikach indukcyjnych dużej mocy użytych w organach urabiających kombajnów górniczych. Zeszyty Problemowe - Maszyny Elektryczne Nr. 76/2007, ss.55-62.
- [4]. Gambica/Rema Technical Guide: Motor Shaft Voltages and Bearing Currents under PWM Inverter Operation. Technical Report No. 2 First Edition, 2002.
- [5]. Guldemir H., Bradley K.J.: An improved approach to the prediction of line current spectrum in induction machines. Electrical Engineering 2003, pp. 17-23.
- [6]. Kerszenbaum I.: Shaft currents in electric machines fed by solid-state drives. IEEE Conference Record of the Industrial and Commercial Power Systems Technical Conference, 1992. Conference Record, Papers Presented at the 1992 Annual Meeting, 4-7 May 1992, pp. 71-79.
- [7]. Matras A., Rams W.: Damages of Bearings of Induction Motor from its Bearing Currents. 48 Intemationales Wissenschaftliches Kolloquium Tech. Universitat Ilmenau, 22-25 Sept. 2003.
- [8]. Zientek P., Niestrój R., Białoń T.: Napięcia wałowe i prądy łożyskowe w silnikach indukcyjnych dużej mocy - badania laboratoryjne. Prace Naukowe Politechniki Śląskiej "Elektryka" Z.3 (203), Wydawnictwo Politechniki Śląskiej, Gliwice 2007, ss.99-112.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0048-0039