Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
VOC combustion is a demanding process for both the reactor and the catalyst design. As we have proved in recent papers the diffusional limitation of reaction rate that occurs during combustion may be overcome by designing the metallic microstructures used as reactor internals. Their application on an industrial scale depends on the development of an efficient method of catalyst layering on metallic supports and the optimisation of a fine catalyst structure which would not change the elaborated microstructure geometry. In this study we propose the Langmuir-Blodgett (LB) film method to deposit various metals (Al, Co) in the form of catalyst organic precursors. The film forming abilities of the precursors were checked by surface pressure measurements upon film compression, Brewster Angle Microscopy and by the monolayers stability measurements. The amount of the deposited materials was controlled by the LB parameters and verified by the TG measurements. The catalyst obtained in this way were characterized at various stages of the preparation by SEM/XFS, XPS, AFM and RM methods and tested in n-hexane combustion. Oxidation of the Al washcoat precursor led to the formation of γ-Al2O3 improving the properties of the Al2O3 layer (α phase) developed on the pre-calcined CrAl carrier. Oxidation of cobalt stearate deposited on the CrAI produced dispersed Co3O4 spinel. The cobalt catalysts were active in combustion showing resistance to sintering. Compared to standard Pt supported catalyst it demonstrated twice as low activation energy (50 kJ/mol).
Czasopismo
Rocznik
Tom
Strony
15--19
Opis fizyczny
Bibliogr. 16 poz., rys., tab.
Twórcy
autor
autor
autor
- Faculty of Chemistry, Jagiellonian University, Ingardena 3, 30-060 Kraków
Bibliografia
- 1. Kołodziej A., Łojewska J., Kleszcz T.: "Structured catalytic reactor for VOC combustion", submitted to Polish Journal of Chemical Technology.
- 2. Kołodziej A., Łojewska J.: Catal. Today 2005, 105, 378.
- 3. Łojewska J., Kołodziej A., Dynarowicz-Łątka P., Wesełucha-Birczyńska A.: Catal. Today 2005, 101, 81.
- 4. Łojewska J., Dynarowicz-Łątka P., Kołodziej A.: Thin Solid Films 2006, 495, 299.
- 5. Łojewska J., Kołodziej Żak J., Stoch J.: Catal. Today 2005, 105, 655.
- 6. Busca G., Daturi M., Finocchio E., Lorenzelli V., Ramis G., Willey R. J.: Catal. Today 1997, 33, 239.
- 7. Marchetti L., Forni L.: Appl. Catal. B: Environmental 1998, 15, 179.
- 8. Neeft J. P. A., Makkee M., Moulijn J. A.: Appl. Catal. B: Environmental 1996, 8, 57.
- 9. Neeft J. P. A., van Pruissen O. P. P., Makkee M., Moulijn J. A.: Appl. Catal. B: Environmental, 1997, 12, 21.
- 10. Harrison P. G., Ball I. K., Daniell W., Lukinskas P., Céspedes M., Miró E. E., Ulla M. A., Chem. Eng. J. 2003, 95, 47.
- 11. Ahlström-Silversand A. F., Odenbrand C. U. I.: Chemical Engineering Journal 1999, 73 205.
- 12. Wojciechowska M., Haber J., Łomnicki S., Stoch J.: J. Mol. Catal. A: Chemical 1999, 141, 155.
- 13. Zak J., Kolodziej-Sadlok M.: Electrochim. Acta 2000, 45, 2803.
- 14. NIST database: http://webbook.nist.gov/chemistry/
- 15. Skonglundh M., Johansson H., Löwendahl L., Jansson K., Dahl L., Hirschauer B.: Appl. Catal. B: Environmental 1996, 7, 299.
- 16. Xiao T., Ji S., Wang H., Coleman K. S., Green M. L. H.: J. Mol. Catal. A: Chemical 2001, 175, 111.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0044-0018