PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Emulsification time in the agitation vessel equipped with double impellers

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper deals with the results of experiments on mixing in a vessel equipped with double impellers. The flat-bottomed vessel was equipped with the Rushton turbine (RT) or six flat blade turbines (FBT) or six pitched down blade turbines (PBT). The impellers were mounted symmetrically on the common shaft in various combinations of the two impellers. It has been found that the emulsification time of the oil phase decreases when the distance between the impellers increases. In this case, because of the smaller distance between the upper impeller and the oil phase, the hydrodynamic forces have greater influence. The lowest value of the emulsification time has been achieved for the vessel with the dual Rushton turbine (in comparison with the flat or pitched blade turbine).
Rocznik
Strony
53--55
Opis fizyczny
Bibliogr. 5 poz., rys., tab.
Twórcy
Bibliografia
  • (1) Stręk F.: Agitation and Agitated Vessels, Wydawnictwo Naukowo-Techniczne, Warszawa 1982.
  • (2) Hinze J. O.: Fundamentals of the hydrodynamic mechanism of splitting in dispersion processes, AICHE Journal, 1955, 1, 289.
  • (3) Paglianti A., Pintus S.: An impedance probe for the measurement of the liquid hold-up and mixing time in two/three-phase stirred tank reactors, Experiments in Fluids, 2001, 31, 4, 417.
  • (4) Ceccio S. L., George D. L.: A review of electrical impedance techniques for the measurement of multiphase flow, Journal of Fluids Engineering, 1996, 118, 391.
  • (5) Pinderre P., Piccerelle Ph., Cauture E., Kalantzis G., Reynier J. P., Joachim J.: Formulation and evaluation of o/w emulsions using experimental design, International Journal of Pharmaceutics, 1998, 163, 73.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPS2-0041-0023
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.